Fetch Corresponding Data Value
Dec 8, 2013
I need to fetch corresponding data value from a data set which is spread across the sheet horizontally as well vertically. i need the net sales and net profit figures to fetched to a different worksheet/book. i have quarterly data horizontally and yearly data vertically. Below is a table in a horizontal manner. How to automate or less-time-consuming
Output required as:
period 6-30-2000 9-30-2000
net sales ........ ............
net profit ....... ............
Type
Un-Audited
Date Begin
4-1-2000
Date End
6-30-2000
[Code] ......
View 4 Replies
ADVERTISEMENT
Mar 26, 2008
I have a sheet which has certain formulas & charts. I have a folder which has several workbooks of data.
Generally, I open the folder, open one workbook, copy the data, paste it to my Master Workbook, and based on this data, my charts update.
Now, the problem is that, I have to open every workbook one by one, copy and paste it to the master.
I have not less then 210 workbooks. I just want to know if it is possible to open the folder, open the desired workbook, copy the specific data and past it to master workbook, FROM Maste workbook itself.
View 9 Replies
View Related
Apr 2, 2009
Fetch data from the table on the page given by the link below..
http://www.moneycontrol.com/stocks/f...l&sort_order=0
View 9 Replies
View Related
Sep 12, 2013
I tried to use the following code to get data from an ASPX webpage:
[URL]....
VB:
Sub Fetch_Marcas()
Dim IeTbl As Object
Dim obj As Object
Dim Scrn As String
Dim objIE As SHDocVw.InternetExplorer 'Microsoft Internet controls (shdocvw.dll)
[Code]....
However, I cannot get past the point where I click over the register (highlighted in yellow in Picture 1), to get the data displayed at Picture 2.
Picture 1
Picture 1.jpg
Picture 2
Picture 2.jpg
Please note that this query requires to click over what is not a button (I looked in the forum, but no similar question was made before on this topic).
View 6 Replies
View Related
Jun 13, 2007
Is there a way to capture the records(which meets the criteria) from different excel sheets' sheet1 (A.xls,B.xls) located in some path (c: est) and copied them into our own Result.xls spread sheet?
It would be great and very useful, if you could provide the solution for this.
View 9 Replies
View Related
Oct 22, 2013
Attached is my .xls with dummy data Fetch data By Director.xlsx.
My intention is that once the Director and Month in tab 'By Director & Month' is chosen and the Fetch Data commandbutton is clicked, a new workbook should open.
This new work book should have :
all entries in tab 'Monthly Invoice Input' for that Director-Month combination,along with a sum total of column Q(Total invoice amount) in the last row.
View 6 Replies
View Related
Aug 10, 2014
I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.
I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.
View 1 Replies
View Related
Aug 20, 2013
I would like to be able to have Excel VBA pull down the data from the following website.
The first URL will take you to the website, but you then need to select a state shown in bold from the Radio side of the index window in the middle of the screen. Once at the next screen, this is the table I wish to download into excel.
I want to do this for all the states listed. How can I do this or is it possible since you have to select a state prior to the listing.
HTML Code: [URL] ..... I found this code from anothe thread but it did not work.
Code:
Sub GetData()
Dim x As Long, y As Long, t As Long
Dim htm As Object
[Code] ....
View 1 Replies
View Related
Sep 30, 2013
I have created a macro file which will fetch the data from sql server. Here is the code
f Me.Cmbchoose.Value = "" Then
MsgBox "Please Choose From the drop down Menu!!", vbExclamation
Exit Sub
End If
If Me.Cmbchoose.Value = "Merchants Reports" Then
Dim oConn As ADODB.Connection
[Code] .....
The code is working fine. Now my question is that I want to access it from my home. How do I do that without DSN set up?
View 5 Replies
View Related
Dec 20, 2013
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
View 12 Replies
View Related
Apr 4, 2014
I want some code on how to fetch data from an Excel Database and display it on respective textbox.
Like I have these coloum name in excel sheet; Emp Id
Name
DOB
Dept
Reporting to
Transport req.
I want to have VBA code to fetch it on txtbx1, txybx2 and so on.
View 1 Replies
View Related
Aug 29, 2006
I am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.
* What is the syntax to find if the link is correct/present
* What is the syntax to find if the file is present in specified location
* What is the syntax to find if the file is password protected to open
* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.
For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.
View 5 Replies
View Related
Oct 11, 2009
copied some of the code from this website. but still i am struggling with coding. it gives error subscript out of race of my sheet name
what is wrong in it
/tag acccounts = ActiveSheet.Name
Sheets.Add
TempSh = ActiveSheet.Name
Sheets(TempSh).Activate
Application.ScreenUpdating = True
For Each f1 In fc
With Sheets("accounts")"/tag
View 9 Replies
View Related
Nov 5, 2009
I am trying to find unique values on one page and copy/paste them on another page (all within one workbook). I tried to use advanced filter, but ran on some problems: i) it does not copy values on to the new page ii) it is not dynamic.
my information is entered on a daily basis, which is why I need the filter (or code) to be dynamic. The information, however, is not stored, but rather generates a daily invoice, this is why I want find only unique values to appear on a new page (invoice).
View 10 Replies
View Related
May 9, 2013
I have a requirement to pull report from BMC remedy using VBA. I am sure that many people would have achieved this. .
View 1 Replies
View Related
Nov 22, 2013
I need to list all freeze pane position from every sheets in my workbook in order to reverse a "unfreeze all" function. I don't know if i need to be more specific ?
Situation : I have a workbook with many sheets. Every worksheet has a different freeze pane position. I hate freeze panes, so while i'm working in a workbook, i remove them all. My boss likes those ones so i want to give him back my work with the same layout.
The main thing i don't know here if how you ask Excel to fetch freeze pane info. Ideally the information will be reported in a new sheet, columns : Sheets, HorizontalFreezePanePosition, VerticalFPP...
Once i will have this list, i will create a new macro and set back freeze pane individually.
View 2 Replies
View Related
Apr 20, 2014
In A1 there is an ActiveX Control Text Box inserted, now in A1 cell which is beneath this text box contain the formula that if A9 is blank than "Customer Name" should appear else it should show blank. But the problem is when I write some thing in this text box which is connected with A9, formula works as "Customer Name" disappears but when I delete in text box it simply acts as if something is still present in cell A9 and formula does not comeback to "Customer Name" again & therefore in order to appear "Customer Name" I have to go to A9 and press delete button to get the desirous result from the formula.
Readers are requested to make this formula work becz the situation in which this formula has been invented is well fitted and not other formula can supplant it.
View 1 Replies
View Related
Apr 28, 2009
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies
View Related
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
Jan 29, 2013
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
View 1 Replies
View Related
Dec 17, 2013
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
View 2 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
Apr 30, 2014
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J
Email in Column L
Memo in Column N
Balance in Column T
Due Date in Column P
Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L
Subject: "Company Payment Remittance Payment Date *Date from Column P*"
Body: Hello *Name from Column J*,
For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
Example Workbook for Email Macro.xlsx
View 1 Replies
View Related
Feb 8, 2014
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
View 2 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Oct 19, 2012
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
btw...I am running Office 2010
View 2 Replies
View Related
Jan 11, 2013
I have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?
It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.
View 1 Replies
View Related
Apr 22, 2014
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
View 2 Replies
View Related
Jul 15, 2014
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
View 3 Replies
View Related
