I have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics:
Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.
I'm trying to do some userform development with multiple dependent comboboxes, but I am having trouble populating the third and last combobox. First, I populate the 1st combobox on the userform initialization. I can get the first 2 comboboxes to populate correctly, but I can't seem to get the 3rd combobox to populate correctly.
The 3rd combobox takes the selection from the 2nd combobox and searches column "A" in the worksheet "Chassis Specs" and populates the 3rd combobox with data from column "B", there will be repeat items in column "A", but all those occurances should populate the 3rd combobox with the data from "B".
I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.
I am trying to create a sheet for identifying work hazards based on the job assigned. So what I have set up is a drop down list to select the job type. Once this job type is selected I want the pre written hazards to autopopulate in the hazard box. I would also like the required PPE to appear in the PPE box for the job selected.
I have 6 different choices in the drop down list. For each choice I have the hazards and PPE in a separate sheets in the worksheet.
Is there a way to get this information to autopopulate?
I need help to create a formula that would grab data from one sheet and populate another sheet based on the employee that is selected from a drop down list.
Attached is a draft of what I am looking to do.
Basically this would allow us to enter employee variances from several employees on one sheet and get a detailed break down of their history on another sheet.
to put in the correct format I am thinking of usinf drop down boxes so that the user can selct the camp name from drop down and based on that the session name can be populated and alos the rest of infomration of that accput in to the specified fields
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I would like to do is have 2 listboxes. In the first listbox I would like the name of all the worksheets which contain the words "elective class: " in cell C7.
In the second listbox I would like the name of all the worksheets which do not contain the words "elective class: " in C7. I need this only to source from worksheet 7 onwards however.
The listboxes are called ListBox1 and ListBox2 respectively.
Also I am using this to print and I have a button which currently selects all the data in the first listbox and another button which prints all the selected data. The code being used for this is:
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
What I'd like to do is fill specific cells with specific information drawn from other pages based on a combo box selection.
For example, if I were to pick 10131 in the combo box, I'd like it to fill out cells X, Y and Z with information from the three cells to the right of 10131. Assume X, Y and Z are not touching.
On a sheet named "Matrix" I have rows of data in columns A, B, and C. I have the following code in a ComboBox that will show names from column B of the Matrix sheet.
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
I know there are a lot of hide row threads... i've searched for ages... but (unfortunately) i can't a solution that addresses my problem and I'm stuck. Please help!
I have a data between rows 10 and 1310 and I would like to use a combo box option to select and view certain rows of data only. I don't want to use auto filter because i have a separate macro using an auto filter on the same data - they won't play together.
So in short - combo box will contain values from column A. When value is selected from combo box hide all non matching rows based on column A values.
So i have added a combo box to sheet1 and populated it with the following workbook code...
Sub Workbook_Open() With Sheets("Sheet1").ComboBox1 .AddItem "Select Product Type" .AddItem "Apples" .AddItem "Mangoes" .AddItem "Oranges" .AddItem "Clothes pegs"........
There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
My table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
I have filled up my ComboBox1 with the sheets I want to add information to. My problem now is how to place the info in the correct sheet when I click CommandButton1.
I've been working on this for a few hours now. I got this to work on the first code I found but it didn't work afterward. I just deleted the whole thing and started again.
open attached file: For example, if I click "show matching lists" button and select from combobox st8 / b1 / b4. I need in cell K2: 3472.9 and in cell L2: 3472.9.
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
I am working on a spreadsheet for a client. I am using Excel 2007 and she is using Excel 2000. I have created a emplate for her to enter survey data into. Using the following code, I have created combo boxes for the drop-down menus so the client can tab from one cell to the next while entering data:
Option Explicit Private Sub TempCombo_KeyDown(ByVal _ KeyCode As MSForms.ReturnInteger, _ ByVal Shift As Integer) 'Hide combo box and move to next cell on Enter and Tab Select Case KeyCode Case 9 ActiveCell.Offset(0, 1).Activate Case 13 ActiveCell.Offset(1, 0).Activate Case Else 'do nothing End Select End Sub.....................
I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code: Sub cmbLnOffNum_Change() Dim idx As Long Dim LnOffRow As Long
I have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1 Name | Address | Phone number Andy | Avenue 2 | 999 John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2 Name | Address | Phone number John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...
So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...
Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...
I'm using Excel 2010 on windows 7.
Code: Sub UnHide_NewRoutings() If (Engineering.ComboBox2.value) = "0" Then Engineering.Label4.Visible = False Engineering.TextBox5.Visible = False Engineering.Label9.Visible = False Engineering.TextBox9.Visible = False
I have a combobox that is not populating correctly. The design of it uses an existing list (which changes every month) to populate the contents of the combobox. I want the user to be able to select a location from the list if it is already on the worksheet, rather than having to key in the location name for every single record. This Sub worked just fine and dandy for me until I deployed the workbook to the end user. Then this particular combobox decided not to work.
I have been over this code many, many times and I am almost positive that it's just a matter of my not being able to see the obvious. Perhaps another set of eyes looking at the code will be able to see what I can not.
Sub get_Locations() Dim allCells As Range, Cell As Range Dim noDupes As New Collection
Sheets("Main").Select ' get the first from last row #--the last row is a row of record counts and sums. endRange = ActiveSheet.UsedRange.Rows.Count - 1
ComboBox1.Clear ' This will clear the combobox. If endRange 65536 Then ' If the row number is not the end of the worksheet, _ there must be something already on the worksheet, so build the list. On Error Resume Next ' Get unique values in range by checking each cell in range. For Each Cell In Range("D12:D" & endRange) noDupes.Add Cell.Value, CStr(Cell.Value) Next Cell On Error GoTo 0
' Sort the collection alphabetically within the combobox For i = 1 To noDupes.Count - 1 For j = i + 1 To noDupes.Count If noDupes(i) > noDupes(j) Then Swap1 = noDupes(i) Swap2 = noDupes(j) noDupes.Add Swap1, before:=j noDupes.Add Swap2, before:=i noDupes.Remove i + 1 noDupes.Remove j + 1 End If Next j Next i
' Add items to combobox in their new alphabetical order. itemIndex = 0 For Each Item In noDupes UserForm2.ComboBox1.AddItem Item, itemIndex itemIndex = itemIndex + 1 Next Item Else ' otherwise there's no list to populate and the default row is 12 endRange = 12 Range("A12").Select End If End Sub
And just for the record, all object references (cell ranges, comboBox, etc.) are valid and correctly named, so I know it's not there. I also recognize that I have overspecified things by using "UserForm2", but I have done that in the hopes of finding the problem. And the code does execute at the proper times, populating "noDupes" correctly. The problem seems to occur near the end, in the block where noDupes is added to ComboBox1.
