I have attached the example workbook with the macros included but what I am trying to do is filter a column, then add in a formula to another column, then have the formula filled in to the end of the filtered selection.
At the moment I have to go over the last row as there may well be additions later. I recorded the macro, then tidied it up. All it seems to do at the moment is copy the Column header. So here is the macro:-
Sub Macro4()
Range("A36:K36").Select
Application.CutCopyMode = False
Selection.FillDown
End Sub
I have a column, A1 has XYZ in it, then there is a variable number of cells down to XYA, a variable number of cells down to XYB etc (all in column A).
IE
XYZ
(blank)
(blank)
XYA
(blank)
(blank)
(blank)
XYB
(blank)
etc
How do I fill in the blanks with the corresponding header?
IE
XYZ
XYZ
XYZ
XYA
XYA
XYA
XYA
XYB
XYB
etc
I'm trying to record a macro that will filldown a formula through a specific range of cells (like G2:g729).
View 2 Replies View RelatedOn sheet "Kilo" I have 2 command buttons one "insert" and one "delete". I would like the insert button to work as if it was being utilized as if it was still on the "Nom roll" sheet. If I use the button on kilo as is it messes up the Kilo sheet.
View 9 Replies View RelatedI am currently using this macro to fill down cells full of numbers which have been passed through formulae. It works for one input (C10), however I want it to work for another input (C11). Im trying to make it fill down the cells after a new set of headings identical to row 12. It has to take into account the rows used for the original fill down which relies on C10. I have tried to use the same macro twice, but I cant get it to do both layers. Basically I need a fill down of layer 1 (already done), and then a fill down for layer 2 after layer 1.
View 2 Replies View RelatedI have a auto filtered applied to 1000 rows of data and the actual quantity of rows I currently see is 55 rows. When I do a filldown command to apply this formula, "=CONCATENATE(X$1,I51)" the result I get is wrong becuase where the "I51" value is at the formula is picking up cell values that are hidden due to the applied autofilter.
What do I need to add to this formula so that it only picks up cell values that are not suppressed by the autofilter? I want it to disregard the hidden rows when I do a filldown and only apply the formula to the rows that are not hidden due to the applied autofilter.
I am trying something out the ordinary, instead of hardcoding the Range, I want o find the last used row of the Range and append, then filldown.
I think my idea is good, but either syntax is off or not going to be allowed to do this.
.Range("F" & lLrwT + 1: "F").FillDown
>>I have posted this on VBAx too.<<
What is the macro code to take a cell say H7 which has the formula =$K$3-F7, and filldown to the last row of data in column E? This needs to be dynamic as ill be running this from period to period so the number of rows will always change.
H7 will always be the starting cell for every period. Just not sure how to tell VBA to fill this formula down and stop at the last row of data with another columm as a reference.
= LOOKUP(L4,' Speed Charts'!A4:A73,'Speed Charts'!B4:B73)
I want to filldown this formula, but the comparison range ( sheet 2, columns A & B, rows 4-73) never changes. how can accomplish this so when i use ctrl-d, only L4 updates (to L5, L6, L7, etc..), but the range remains the same?
by default, filldown tool updates the range to A5:A74, A6:A75, A7:A76, etc
if it helps i'm using this forumla to:
1) take a value (L4)
2) find this value in the first range (somewhere in sheet 2 column A)
3) enter the corresponding value (sheet 2 column b, same row)
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
How to automatically filter can filter and blue-colored cells.
View 4 Replies View RelatedWriting code to do the following:
Save advanced filter settings
Remove filter (or simply set to be 'select all'
Run other code (I have this piece of course)
Put filter back on with same selections chosen as when it was removed
(Need this becuase the code in the middle does not work properly when the data is filtered)
I just got into the world of PowerPivot, Excel 2013 and Pivot Tables and am in the process of creating a Dashboard which I will then be uploading to SharePoint 2013.
On top of page I added the new timeline filter which I've linked to my pivot charts. Now what I would like to do, is create an additional pivot chart which looks at whatever date range has been used in the timeline filter and subtract 5 years from that. So, when I select a date range of November 2013 - December 2013 in timeline filter, the additional pivot chart will show the details for November 2008 - December 2013. This is where I get stuck.
I'm using two SSAS cubes which I'm combining together in PowerPivot and then display in Pivot Tables and Pivot Charts.
Can anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View RelatedI m trying to use an Autofilter to filter my cells with a Number Filter of is greater of equal to 4 and is less than or equal to 5.
But as you can see I would like to customise is using a range of 2 values which i have specified in Cell P1 and Q1.
I manage to figure out how to reference to this cell, but Im not sure how can i put my ">=" and "<=" operators into my code so i can get it to work exactly how i want as shown in Code 1.
Code 1
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=">=4", _
Operator:=xlAnd, Criteria2:="<=5"
Code 2
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=Range("P1").Value, _Operator:=xlAnd, Criteria2:=Range("Q1").Value
I have some columns on which I have a filter, with some columns next to those that have information in them.
What I need to do is filter only columns A-F when apply filter values, but keep columns I-K fixed as A-F change when they are filtered..
I've a table of data which users auto-filter. I'm wanting to capture the filter criteria each time the filter is applied / re-applied. Can't seem to find an 'event' for the auto-filter.
View 4 Replies View RelatedHow do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
I am in the process of making a database more efficient and am running into a problem with sorting data. I currently am trying to use AutoFilter to sort the data. When I want to then narrow the results further using the same column as the critical and there is nothing that matches the critical, I get everything from the entire database that matches that critical rather than what I want to see, which, in this case, would be nothing.
I have attached a sample file. In it, when All AF 1000 is run and then Selected MAC 2000 Wash is run, I want to see no results instead of seeing all MAC 2000 Washes from the original data set. I can do it using IF/THEN but I am looking for a faster way to do it.
How do I filter multiple columns of information with the use of one dropdown arrow?
see the attached picture (jpg.) for a visual representation of exactly what I am trying to achieve. Excel Filtering.jpg
I have also attached an Excel Filtering Example spreadsheet for use in explaining how to create this type of stacking filter. Excel Filtering Example.xlsx
I have many sheets which I am using the advanced filter to filter the data to a single summary sheet. Everthing works great with one exception. I have cell comments added with relevent info to to cell values. When the advanced filter is performed the cell comments are not transfered to the summary sheet with the cell values. Is there a method to filter the data to another sheet and keep the comments?
View 5 Replies View RelatedI have the following data on sheet1
COLOUR
ART NO.
BRAND
SIZE
SURFACE
PACKING
M2 CTN
OUR CODE
INC
STK
BOOK
FREE
Grey
GCM04
CEMENTUM
60 X 60
Matt
3
1.08
239.000.02
2,450.00
[Code] ...........
Can a drop box on sheet 2 specifying tile size pull data or without drop box , I know the normal filter is the best option but trying to spoon feed the sales team since some are weak users, they would hardly know how to use the FILTER option.
Is there an easier way to use a column FILTER without using the very ugly AUTO FILTER ?
View 9 Replies View RelatedIn the attached workbook named: Test 2.xls please view the worksheet named: Report. On this worksheet the user (user has very little experience in Excel 2003) selects an Operation in cell B2 via a drop-down list and a Task Group in cell B4 via a drop-down list.
After the user has made their selections, I need Excel 2003 to automatically Select worksheet named: Data. I then need it to automatically filter the user selected Operation in column B and the user selected Task Group in column C.
Once the filtering is complete, I need Excel to automatically lookup any instances where the user selected Operation and user selected Task Group has a matching value in column X containing the text: "VACANT".
For example: if the user selected the Operation: "Seaside" and Task Group: "Finance", then I need these two selections to be filtered on worksheet named: Data. After that, I need Excel to automatically lookup or filter any instances of a matching value in column X containing the text: "VACANT".
If there are any instances of a matching value in column X containing the text: "VACANT", I need Excel to automatically select that entire row of data and copy it to a new workbook named: Report.xls on worksheet named: Report.
Report.xls resides on C: drive. Operations has a defined name = Operations!$A$2:$A$12. Task Group has a defined name = Groups!$A$2:$A$29.
A
B
C
D
ID_1
LAST
ID_1
[Code] ....
Result Should Be
A
B
ID_1
Last
[Code] .....
I have sucsessfuly been able to link my Stock trading platform to Excel.
I was told to use this formula =SUM(a1:a10,1038.25,b1:b10).
This worked great. (Thanks again Gerald) Its telling excel to look at all the cells in the range a1:a10, identify which of them contain the value 1038, and then SUM the cells on those rows in the range b1:b10.
in the D column, the cells will either say ask, bid or trd. I want to filter out the ask and bid. The only ones that i am interested in are the ones that say trd.