Autofilter To Filter Cells With A Number Filter Of >= 4 And <= 5
Jul 25, 2009
I m trying to use an Autofilter to filter my cells with a Number Filter of is greater of equal to 4 and is less than or equal to 5.
But as you can see I would like to customise is using a range of 2 values which i have specified in Cell P1 and Q1.
I manage to figure out how to reference to this cell, but Im not sure how can i put my ">=" and "<=" operators into my code so i can get it to work exactly how i want as shown in Code 1.
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
If I had a table of data (say in range A5:D15) and then I autofiltered that table in vba with...
range("A5:D15"). autofilter
Is there any way that I can change the positioning of the autofilter drop down arrows, to row 1 say, rather than the usual row 5 (the top of the table)?
I am trying to use the AutoFilter/Custom function in Excel (it is available under the Data Menu). It offers me two conditions/criteria that I can apply using and/or. For eg:
Filter:
does not begin with - 3
and / or
does not begin with - 9.
I want to add a third 'and' criteria .. is it possible, and if so, how?
The column that I am trying to filter has numbers formatted as text.
I am experinacing some difficulty in using the Autofilter in the attached sheet. The workbook consisits of the following sheets:
Main
Contains a button taht crates data for sheet "Working Data" by filtering and formating data found in Raw Data sheet. The code behind it ain't preetty but it worsk. Raw data
Just as the name implies
Working Data
Filter and formated raw data. After the VB code behind the button on sheet Main runs, I Insert an Autofilter on the coluimns of Working data. on column I ( Length ) I try and filter for rows were the value in column I is >= 35. Nothing shows up. I know this is wrong, just by inspection. I can ask for rows were column I is = 35 and get 1 rows. I can ask for rows were column I is = 45 and get 1 rows. in fact I have Raw Data that comprises about 2000 rows but had to chop it down to meat board size req'ts:>
using VBA I have a control sheet which summerises variouse counts & totals of data held on a detail sheet. Bu using filters and counting the visable rows.
Statistics on 50 columns of data held in several thousand (rows) mixed around eight business regionsheld in first column.
I could determin the number of affected rows by using Tick boxes on the control sheet and applying filters to the detail records
A) checkbox indicates if I need filtering on the type of data in my detail sheet and apply the filter Selection.AutoFilter Field:=XX, Criteria1:="Y"
B) Because I could not have more than two criteria on an autofilter column I resorted to using Advanced Filter on the column with the Business UNIT's, I Create a range write the criteria of the records to be filtered into the range, then apply an advanced filter using that range.
Both of these work well indevidually, but I am getting inconsistant results when I mix them
using the autofilter route I can select multiple tick boxes and the output is correct, and using the advanced filter I can select any combination of business units and the output is correct, however I cant get them to work together
if anyone knows some VBA code to filter on the next line down in an autofilter list.
My spreadsheet has a column with the names of people, which can appear multiple times in no particular order.
I have a macro that I run several times -- once for each individual in the column. The way that I currently do this is by manually using the autofilter on that column to select a person from the autofilter dropdown list. After I've manually filtered on a person, I click a button which runs the assigned macro. I then manually select the next person in the autofilter list, and click the macro button -- over and over until I've done this for everyone in the autofilter list.
I'd like to add some code at the end of my macro so that the macro ends by automatically filtering on the next person (line) in the autofilter list.
I have a macro that automatically updates the field value if certain criterias are met. Now the user asked that TYPE be the first column in the spreadsheet. How do I change the last line in my macro to reflect that?
The range has now also changed from "A1:AT1000" to "A1:AG1000" ..
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code: Option Explicit '>> 'This example will copy the filter results below the existing data on the destination sheet. 'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook. 'This example will not copy the header row each time so when you manual add the worksheet '"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
I've have and autofilter in the heading of a column that allows me filter on All, NonBlanks, Blanks, Cell Entries, Etc.....But for some reason when I filter on all a number of rows are hidden or the row height is set to 0 and I can't view the cells unless I change the row height.
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data. DATA is the name of the raw data worksheet The criteria range should be AZ1:BC3, but of course royally breaks it...
Save advanced filter settings Remove filter (or simply set to be 'select all' Run other code (I have this piece of course) Put filter back on with same selections chosen as when it was removed
(Need this becuase the code in the middle does not work properly when the data is filtered)
I just got into the world of PowerPivot, Excel 2013 and Pivot Tables and am in the process of creating a Dashboard which I will then be uploading to SharePoint 2013.
On top of page I added the new timeline filter which I've linked to my pivot charts. Now what I would like to do, is create an additional pivot chart which looks at whatever date range has been used in the timeline filter and subtract 5 years from that. So, when I select a date range of November 2013 - December 2013 in timeline filter, the additional pivot chart will show the details for November 2008 - December 2013. This is where I get stuck.
I'm using two SSAS cubes which I'm combining together in PowerPivot and then display in Pivot Tables and Pivot Charts.
I've a table of data which users auto-filter. I'm wanting to capture the filter criteria each time the filter is applied / re-applied. Can't seem to find an 'event' for the auto-filter.
I am in the process of making a database more efficient and am running into a problem with sorting data. I currently am trying to use AutoFilter to sort the data. When I want to then narrow the results further using the same column as the critical and there is nothing that matches the critical, I get everything from the entire database that matches that critical rather than what I want to see, which, in this case, would be nothing.
I have attached a sample file. In it, when All AF 1000 is run and then Selected MAC 2000 Wash is run, I want to see no results instead of seeing all MAC 2000 Washes from the original data set. I can do it using IF/THEN but I am looking for a faster way to do it.
How do I filter multiple columns of information with the use of one dropdown arrow?
see the attached picture (jpg.) for a visual representation of exactly what I am trying to achieve. Excel Filtering.jpg
I have also attached an Excel Filtering Example spreadsheet for use in explaining how to create this type of stacking filter. Excel Filtering Example.xlsx
Is there possible filter a partial number in column?
i have many values in column, i want enter partial value in Texbox (ActiveX).
if i enter in textbox 6840.
Result 64801000 64802000 64803000 ############## if i enter in textbox 5480. Result 54801002 54802002 54801000 54802000 54801001 54802001 54801005 ###################
I have to find out the top first number aftet filtering the data based on particular column. ie each time when i am taking each filter value the row will start from different number.
so how to find the top row number after filter? U got what i mean?
This has got to be simpler than I'm making it out to be, but I'm stuck. I have a column that is created by a formula that counts the number of times a name appears in a list and prepends the number to the beginning of the name. The result is something like:
There's got to be an easy way to do this, but I can't figure how to account for the variable number of digits (1 or 2 digits) at the beginning. It would probably work to set up an advanced filter for cells that begin with a number less than 2, but I don't know how to do that.
Now that I have it filtered I need to know how many rows are there with data. I'll then set up a loop to read the data from each row. I can't use my getend function because it will still end up with 93 rows and the number of unassigned is about 23.
I have a large file with cells filled with text (converted from a database, imported into Excel). The text is in rows of column A and always contains a 16 digit number, which is what I need. I am able to clean up this text and show only this number, but then Excel shows the last digit as a '0'.
An example of the text I need to filter the 16-digit number from: GIRO 6838657 K MAHMODBETALINGSKENM. 7062542158461684 STORNOADMINISTRATIEVE REDEN 1 ZIE DE TOEGEZONDEN KENNISGEVINGVAN VERHAAL OF CJIC.NL/VZD
I've altered some of the information in here so this is fake. The text is messy but all I need is the number.
This is the macro I use to clean up the text and leave only the 16 digit number:
Sub CleanUp Dim e As Variant With CreateObject("VBScript.RegExp")
[Code].....
It sort of works, but when I run it, I get this number as a result: 7062542158461680 (last digit is changed into a zero).
I've been trying to insert this line into the macro but it doesn't work: Columns("A:A").NumberFormat = "@"
How do I change the outcome of this macro into the actual number?
If this is impossible to do, I can also manage if there is a way to filter only the last 9 digits from the 16 digit number. I can work with that, too.
