What is the macro code to take a cell say H7 which has the formula =$K$3-F7, and filldown to the last row of data in column E? This needs to be dynamic as ill be running this from period to period so the number of rows will always change.
H7 will always be the starting cell for every period. Just not sure how to tell VBA to fill this formula down and stop at the last row of data with another columm as a reference.
I'm trying to record a macro that will filldown a formula through a specific range of cells (like G2:g729).
View 2 Replies View RelatedI have a auto filtered applied to 1000 rows of data and the actual quantity of rows I currently see is 55 rows. When I do a filldown command to apply this formula, "=CONCATENATE(X$1,I51)" the result I get is wrong becuase where the "I51" value is at the formula is picking up cell values that are hidden due to the applied autofilter.
What do I need to add to this formula so that it only picks up cell values that are not suppressed by the autofilter? I want it to disregard the hidden rows when I do a filldown and only apply the formula to the rows that are not hidden due to the applied autofilter.
I am currently using this macro to fill down cells full of numbers which have been passed through formulae. It works for one input (C10), however I want it to work for another input (C11). Im trying to make it fill down the cells after a new set of headings identical to row 12. It has to take into account the rows used for the original fill down which relies on C10. I have tried to use the same macro twice, but I cant get it to do both layers. Basically I need a fill down of layer 1 (already done), and then a fill down for layer 2 after layer 1.
View 2 Replies View RelatedI have attached the example workbook with the macros included but what I am trying to do is filter a column, then add in a formula to another column, then have the formula filled in to the end of the filtered selection.
At the moment I have to go over the last row as there may well be additions later. I recorded the macro, then tidied it up. All it seems to do at the moment is copy the Column header. So here is the macro:-
Sub Macro4()
Range("A36:K36").Select
Application.CutCopyMode = False
Selection.FillDown
End Sub
I have a column, A1 has XYZ in it, then there is a variable number of cells down to XYA, a variable number of cells down to XYB etc (all in column A).
IE
XYZ
(blank)
(blank)
XYA
(blank)
(blank)
(blank)
XYB
(blank)
etc
How do I fill in the blanks with the corresponding header?
IE
XYZ
XYZ
XYZ
XYA
XYA
XYA
XYA
XYB
XYB
etc
On sheet "Kilo" I have 2 command buttons one "insert" and one "delete". I would like the insert button to work as if it was being utilized as if it was still on the "Nom roll" sheet. If I use the button on kilo as is it messes up the Kilo sheet.
View 9 Replies View RelatedI am trying something out the ordinary, instead of hardcoding the Range, I want o find the last used row of the Range and append, then filldown.
I think my idea is good, but either syntax is off or not going to be allowed to do this.
.Range("F" & lLrwT + 1: "F").FillDown
>>I have posted this on VBAx too.<<
I need a formula to automatically transfer data in a column into another column, omitting cells in the 1st column that do not have data in them.
So, for example, transfer the data in column "A" below to column "C" below omitting any blanks when the formula automatically copies data over:
Example Spreadsheet.xlsx
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
I am trying to create a macro that will look for a pattern and if the cell has that pattern, then the cell next to it in the row will have a different pattern.
For instance:
for each row in the spreadsheet:
if column a = "Hello" then column b = "World"
if column a = "AAA" then column b ="BBB"
and so on, for different text values.
Id like to apply a formula, any formula to an entire column if it contains data, and incorporate the original data in the calculation and then replace the original data with the result. I don't want to have to create new columns.
I'm using this to fix up database results; a common problem is dates in dot format e.g. 14.11.2008
All I have so far is an autofill formula that overwrites everything. Can someone help me with the rest? I'm using the SUBSTITUTE function to replace the dots '.' with slashes '/'
Sub Create_formula_result()
Dim Limit As Long
Dim r As range
Set r = range("A1")
r.FormulaR1C1 = _
"=IF(RC[0]"""",(SUBSTITUTE(RC[0],""."",""/"")+0) ,"""")"
Limit = ActiveSheet.UsedRange.Rows.Count
r.AutoFill Destination:=range(r, Cells(Limit, r.Column))
End Sub
I want to create a macro which inserts a new colum after the last colum with data.
View 3 Replies View RelatedI need a macro that will insert a column next to column B, and insert formulas into the new respective cells. forumula needs to be in the macro, it won't be located somewhere else on the sheet (for simplicity's sake, let's just say the formula is =A1+B1, then A2+B2 in the next row, etc). Also, it needs to stop inserting formulas when there's no more data in column B.
View 1 Replies View RelatedI need a macro that will copy each formula down each column from row 2 individually and then copy & paste values for each column (from row 3 to row x) until it reaches the first column with a blank in row 2 column y.
1. Copy A2 to A3:A65536
then Copy A3:A65536
then Paste Values A3:A65536
2. Copy B2 to B3:B65536
then Copy B3:B65536
then Paste Values B3:B65536
3. Do to each column until first blank row 2 ( no formula)
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
= LOOKUP(L4,' Speed Charts'!A4:A73,'Speed Charts'!B4:B73)
I want to filldown this formula, but the comparison range ( sheet 2, columns A & B, rows 4-73) never changes. how can accomplish this so when i use ctrl-d, only L4 updates (to L5, L6, L7, etc..), but the range remains the same?
by default, filldown tool updates the range to A5:A74, A6:A75, A7:A76, etc
if it helps i'm using this forumla to:
1) take a value (L4)
2) find this value in the first range (somewhere in sheet 2 column A)
3) enter the corresponding value (sheet 2 column b, same row)
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI want to create a Macro that uses IF statements to enter the CORRECT VALUE into COLUMN “Q” in the ACTIVE WORKSHEET. I am providing an example of what the data set looks like at the very bottom of this post. I want to use a Macro as oppose to Formula in the worksheet because I want to turn the Macro into an Excel Add-In.
I want the Macro to do the following THREE THINGS:
1. IF the Value in COLUMN L is “0” THEN enter “n/a” into COLUMN “Q”
2. IF the Value in COLUMN L is “2” THEN enter “n/a” into COLUMN “Q”
3. IF the Value in COLUMN L is “1” THEN use a formula that looks like this:
= O8 + ( ( O8 / P8 ) * (First SUM the HOURS in COLUMN O for all the ROWS that have the SAME VALUES in COLUMN C and H and a “2” in COLUMN L and then MULTIPLY that Result against those rows with a “1” in COLUMN L whose COLUMNS C and H values match up exactly with those of the Summed Hours). The RESULT of the FORMULA would be entered into COLUMN “Q”. Once you look at the example at the bottom of this post it will definitely start making sense. I highlighted rows 8 – 11 for you in red in the data set at the bottom of this post just to center the attention on the rows I am talking about.
Here is an example of how the formula will work:
I will use ROW 8 from the data set below as an example. From the dataset I know CELL O8 equals 10 and CELL P8 equals 76. Now I will SUM the HOURS in COLUMN O ROWS 10 and 11 for ALL ROWS that have the SAME VALUES in COLUMN C and H in this case the values are “Times” and “PM” and contain a “2” in COLUMN L which happens to equal 3, then that 3 should only apply to those rows with a “1” in COLUMN L whose COLUMNS C and H values match up exactly with those of the Summed Hours. So now I plug that into the formula: =10+((10/76)*(3)) and MY RESULT which will go into COLUMN “Q” IS 10.395.
Here the DATA SET:
Col A Col B Col C Col D Col E Col F Col G Col H Col I Col J Col K Col L Col M Col N Col O Col P Col Q Col R Col S Col T
Row 1 B ID Name Org Div T Number Model Make S Function E Function Type Description P ID OG Hours Sum EA P Hours Sum P S Hours EQ
This is what is happening in Column Q Explanation of Formula
Row 2
Times
Cont
2
28 28 n/a
n/a If formula populates Column Q cells with "n/a" if Column L cells contain a "0" or "2".
Row 3
Times
Cont
1
404 1194 413.4740369
O3+((O3/P3)*28) You get the Sum "28" by adding all the "P Hours" in Column O that match these 3 values:
1. The "Org" value of "Times" in Column C
2. The "S Function" value "Cont" in Column H
3. The "P ID" value "2" in Column L
[Code] ...........
I want my column to be populated by formula using VBA. Let's say on row1, the formula is = SUMIF(mysheet!$L:$L,$A1&C$1&"09",mysheet!$M:$M). And on row 2, the formula is
=SUMIF(mysheet!$L:$L,$A2&C$1&"09",mysheet!$M:$M). And on row 3, the formula is =SUMIF(mysheet!$L:$L,$A3&C$1&"09",mysheet!$M:$M). And this is done up to the last row. How do I do this?
I need a macro to move specific information.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
I want to insert a formula that is tied to a specific column. I know how to do formulas and have a slight understanding of macros. Can I insert the formula as part of a larger macro?
View 3 Replies View RelatedI have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
I have lots of data.What is the best way (formula) to add I10+M10+Q10+.....DY10, (Every 4th column)
View 9 Replies View RelatedI need a macro, or a formula that can identify if the words in the Words Column (Column A) is contained in Title Column (Column B). If it is, It displays as "Yes". If not, display as "No".
Case is not sensitive.
Words
Title
Displayed?
Christmas
Coworker has chronic hiccups
Yes
Excel
I Love Excel
Yes
Cartman
I Like Turtles
No
Ninja
Oh Christmas Tree
Yes
Tiger
Case of the Mondays
No
Chronic
Cute Monkeys
No
I have a formula that I want to insert using a macro, so how do I iterate the * values in this line?
ActiveCell.FormulaR1C1 = "='Sheet1'!R[*]C[*]"
I am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedI am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I am using the following ....