Not to sure if it can be done but i would like to have a button on my spread sheet that once pushed it automaticaly saves my worksheet as a PDF in a selected company folder in my documents.
I know if you go to file and save as PDF, then save in selected folder will work, just looking for a quicker way so my staff just needs to push one button on the worksheet and it does it all. (dummy proofing the form i guess)
I have a UserForm in which i have inserted a CommandButton. I also have a Table on a Sheet in Excel that i would like to save as PDF.
When i click the CommandButton on the UserForm i would like the SaveAs screen to come up and have the Table (or Used Range in the Excel Sheet) as the selection to be Saved as .PDF format.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedI have a sheet name "all" Sheet 15. What I want to do via VBA is sort range B4:I803 sort by Column G (ascending) then by Column H (ascending).
Have this sort activated by a command button or once the WB is saved then activate the sort prior to saving. The former is the preferred but if it's not to much trouble with coding then the former and latter solution would be great.
Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
I inserted a Command Button ("Button1") in a Worksheet ("Sheet5"). I want to disable this button while the vba is running. How do I refer to this form control from vba?
View 1 Replies View RelatedI need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies View RelatedI want to hide a command button when a worksheet is protected and unhide when the sheet is unprotected.
View 14 Replies View RelatedWhat command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies View RelatedI am using following command to check if a command button with 'Email This Page' written on it Exists in active worksheet or not. It always gives not present.
Dim s As String
On Error Resume Next
s = Application. CommandBars(1).Controls("Email This Page").Caption
If Err.Number = 0 Then
MsgBox "It exists"
Else
MsgBox "Not here"
End If
On the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies View RelatedI want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedI have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View RelatedThis is what i have but its not working.
Code:
Private Sub UserForm_Initialize()
CommandButton4.Enabled = Not (Sheets("0").Range("J8") = "Off")
End Sub
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies View RelatedI have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedHow can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown
.State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
I have a spreadsheet with 32 worksheet, I want to write a macro to "save the work, save as.. in a specific location and with a specific name and then reseting all data in specific cells.
View 14 Replies View RelatedI have a update/Save button on a spreadsheet. So when clicked it updates another sheet and saves the workbook.
how can i have it run the macro when they don't click the button and do
File -> Save.
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
Is it possible to check multiple checkboxes with a command button?
For example, I have 20 checkboxes (C5 to C25) when command button is clicked
C5, C12, C17, C20 would be checked.
how to keep a command button in a certain location even if the a row or Column is Deleted or Inserted into the worksheet?
View 1 Replies View Related