Reference Worksheet Command Button
Jan 5, 2008
I need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies
ADVERTISEMENT
May 6, 2009
I have about 200 command buttons on my spreadsheet. Since there are so many of these, I would like to create a VBA routine to determine the cell name four cells over from the cell each command button sits inside, if possible (each command button is small and sits within its own cell). So the command button in cell F1, will let me pull the data or get the cell name of cell C2.
So I guess I am trying to figure out how to do relative references from a command button. Then this will be put in a public variable and passed to a subroutine which is the same for each command button. Only the data in the cells relative to the command button changes. I thought activecell might be useful for this, but you when press a command button, it doesn't make that cell the active cell.
I just thought there might be a simple solution for this, instead of having each single command button have its own subroutine just so each one can reference cells. All I really need is to run the same subroutine with variables from 200 cells, one at a time.
View 3 Replies
View Related
Jan 5, 2014
I inserted a Command Button ("Button1") in a Worksheet ("Sheet5"). I want to disable this button while the vba is running. How do I refer to this form control from vba?
View 1 Replies
View Related
Jul 14, 2009
Not to sure if it can be done but i would like to have a button on my spread sheet that once pushed it automaticaly saves my worksheet as a PDF in a selected company folder in my documents.
I know if you go to file and save as PDF, then save in selected folder will work, just looking for a quicker way so my staff just needs to push one button on the worksheet and it does it all. (dummy proofing the form i guess)
View 9 Replies
View Related
Oct 3, 2009
I want to hide a command button when a worksheet is protected and unhide when the sheet is unprotected.
View 14 Replies
View Related
Sep 26, 2006
What command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies
View Related
Aug 29, 2007
I am using following command to check if a command button with 'Email This Page' written on it Exists in active worksheet or not. It always gives not present.
Dim s As String
On Error Resume Next
s = Application. CommandBars(1).Controls("Email This Page").Caption
If Err.Number = 0 Then
MsgBox "It exists"
Else
MsgBox "Not here"
End If
View 2 Replies
View Related
Dec 16, 2009
On the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
View 7 Replies
View Related
Oct 23, 2012
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies
View Related
Jun 6, 2007
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies
View Related
Mar 6, 2014
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies
View Related
Mar 24, 2014
I have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies
View Related
Jan 13, 2013
This is what i have but its not working.
Code:
Private Sub UserForm_Initialize()
CommandButton4.Enabled = Not (Sheets("0").Range("J8") = "Off")
End Sub
View 3 Replies
View Related
Apr 8, 2008
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies
View Related
Feb 6, 2014
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
View 1 Replies
View Related
Apr 14, 2009
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies
View Related
Feb 3, 2010
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
View 2 Replies
View Related
Aug 31, 2007
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
View 9 Replies
View Related
Nov 8, 2012
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
View 4 Replies
View Related
Mar 9, 2013
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies
View Related
Oct 5, 2006
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
View 2 Replies
View Related
Aug 13, 2008
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown
.State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
View 8 Replies
View Related
Mar 7, 2008
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA.
Sub Process_CheckBox()
Dim cBox As CheckBox
Dim LRow As Integer
Dim LRange As String
LName = Application.Caller
Set cBox = ActiveSheet.CheckBoxes(LName)
' Find row that checkbox resides in
LRow = cBox.TopLeftCell.Row
LRange = "B" & CStr(LRow)
'Change date in column B, if checkbox is checked
If cBox.Value > 0 Then
ActiveSheet.Range(LRange).Value = Date
'Clear date in column B, if checkbox is unchecked
Else
ActiveSheet.Range(LRange).Value = Null
End If
End Sub
Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
View 8 Replies
View Related
Jul 29, 2008
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
View 10 Replies
View Related
Aug 20, 2009
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
View 3 Replies
View Related
Jul 6, 2007
Is it possible to check multiple checkboxes with a command button?
For example, I have 20 checkboxes (C5 to C25) when command button is clicked
C5, C12, C17, C20 would be checked.
View 10 Replies
View Related
Jun 12, 2014
how to keep a command button in a certain location even if the a row or Column is Deleted or Inserted into the worksheet?
View 1 Replies
View Related
Jul 31, 2014
I know that this may seem a little strange to request as you can just select the row and delete it, however the sheet is designed as "idiot proof", so I would like to implement this.
Basically, I have a box which states "If you need to delete a row due to incorrect entry, please type the row number here (next cell), and click delete".
I want to know if by using VBA, you can reference the number entered in the cell, and use this to determin the row in which we are required to delete.
View 8 Replies
View Related
Apr 29, 2008
I have a 2 worksheets. One "Projects in Process"and the other "Project Completed". when the users fill in the information in cells A4-F4 (line 4 is the starting line and it could go down as far as line 23 or a23 - f23) In Projects in Process they press a "completed Project" command button and the data in a4-f4 copies over to worksheet "Projects completed". In the next available row (starting at row 4).
View 13 Replies
View Related
Aug 20, 2008
I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.
View 9 Replies
View Related