On the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies View RelatedI want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedThis is what i have but its not working.
Code:
Private Sub UserForm_Initialize()
CommandButton4.Enabled = Not (Sheets("0").Range("J8") = "Off")
End Sub
What i am trying to do is make a command button appear when you hit any cell of the row its on. For example, If you were to hit any cell on rows 1 or 2 the command button will appear and when I am not on the visible property goes back to false. I have a ton of buttons on this sheet and I am trying to clean it up so buttons only appear as needed.
View 9 Replies View RelatedI inserted a Command Button ("Button1") in a Worksheet ("Sheet5"). I want to disable this button while the vba is running. How do I refer to this form control from vba?
View 1 Replies View RelatedNot to sure if it can be done but i would like to have a button on my spread sheet that once pushed it automaticaly saves my worksheet as a PDF in a selected company folder in my documents.
I know if you go to file and save as PDF, then save in selected folder will work, just looking for a quicker way so my staff just needs to push one button on the worksheet and it does it all. (dummy proofing the form i guess)
I need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies View RelatedI want to hide a command button when a worksheet is protected and unhide when the sheet is unprotected.
View 14 Replies View RelatedWhat command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies View RelatedI am using following command to check if a command button with 'Email This Page' written on it Exists in active worksheet or not. It always gives not present.
Dim s As String
On Error Resume Next
s = Application. CommandBars(1).Controls("Email This Page").Caption
If Err.Number = 0 Then
MsgBox "It exists"
Else
MsgBox "Not here"
End If
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies View RelatedI have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View RelatedI'm looking for an IF function formulae.Currently, the IF function of my cell is =IF($A8=B$1,1,0), value if true=1 , if false= 0.
But how do I make the cell A8 ( MRT , Taxi ) show a true value of 1 ?
Becos MRT , Taxi is also under MRT, but I don't know how to make it a true value of 1.
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedIs it possible to hide a command button if a cell value is 0, and unhide if the same cell value is 1.
View 9 Replies View RelatedI have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
How to hide command button based on another cell?’ [URL] .....
This works faultlessly but for only 1 Button. I tried adding in the code again for a second Button but it creates a conflict. I made a slight adjustment to your original code, to show the button when the cell is populated, which works well…
[Code] .....
Any way I can:-
1. Add additional buttons which reference their own cell?
CommandButton4 – H9
CommandButton6 – I9
CommandButton2 – Q9
CommandButton3 – S9
2. And add one button which activates based on one of 3 cells?
CommandButton1 – J9 &/or V9
I have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
[Code] .....
I have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
Is it possible to create a command button to print the sheet, and, have a prompt come up and ask you to enter a date? Then that date is entered in a cell and the sheet prints? Just not sure where to start. I know how to make the command button and get to the view code for the button.
View 9 Replies View RelatedI have created a cover sheet with various command buttons linking into the available worksheets. I was wondering if it is possible to set the title of the command buttons by linking them to the text in a particular cell in each work sheet??
View 3 Replies View RelatedI was wondering, more specifically, if I could on say a single click on the cell, keep comment open until clicked outside of the cell comment. Currently set up at the moment to show comment on mouseover of the cell. And I would like to keep comment open if i choose to click on the cell.
View 1 Replies View RelatedHow can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.