Find All Instances Of Word And List Adjacent Cells
Apr 1, 2008
I have a sheet where in one column, the word "high" will be repeated. I need to find these multiples and then list down in a seperate column the text relevant to each of those multiples (contained in an adjacent cell). I.e if A1 & A3 hold the text "high", take the corresponding values in b1 & B3 and list them in new column C (C1 & C2 continuing in sequential order). I have searched the forums but i can' t seem to find anything.
View 9 Replies
ADVERTISEMENT
Jan 30, 2014
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies
View Related
May 26, 2006
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document.
For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document
'or
Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
View 2 Replies
View Related
May 20, 2014
I have an input sheet with 3 columns: Currency pair, Tenors, and Value.
Like this:
EURUSD 1m 3
EURUSD 3m 0
EURUSD 1y 5
GBPUSD 1w 2
GBPUSD 1m 9
GBPUSD 2m 1
etc etc for about 100+ rows.
This input is exported from a system we have and may vary in length and values from time to time.
What I want to do is pull all the data for specific currency pairs (probably for 5 of the 10+ currency pairs it displays) onto another worksheet. And for each tenor for that currency pair, i want to perform 10-20 lines of analysis on the next sheet.
So, if GBPUSD was a currency pair I was interested in, I would need 10-20 lines for GBPUSD 1w, 10-20 lines for GBPUSD 1m, 10-20 lines for GBPUSD 2m, etc.
How can I pull this? While maintaining flexibility so if the tenors, currencies, and # of lines change?
View 1 Replies
View Related
Apr 5, 2014
I'm trying to make a spreadsheet template that will find and replace all instances of a given word with a bold or highlighted version. However, I do not know how to make this process passive and automated. That is, as soon as I type certain words, they should be auto-corrected. Is there a way to set excel so it will recognize certain words and replace them? Is there a way to do this in the settings? I don't think a macro is the right answer in this case, so I put it in the general thread.
View 5 Replies
View Related
Jan 19, 2007
I have two columns in a spreadsheet.
In cell "$D$3" is the word "Period 1".
I want to be able to do the following.
Double click on cell D3, where the word period 1 is.
VBA then looks up that period in column B, and finds the corresponding weeks for period 1 from column A.
I then want VBA to list these weeks next to the period 1 I double clicked, so in column E.
I have attached a spreadsheet as an example.
View 9 Replies
View Related
Nov 27, 2007
I am really stumped at this particular point in my coding. What I am trying to do is to have a user input an ID number. When they click OK, I want to find the ID number and then subtract 1 from a number that is 13 columns over. So if the ID number is "123456789" and that matches the value in A3, I want to subtract 1 from the amount in M3 (leaving the new value in cell M3). So, if M3 was 30, now it would be 29.
View 2 Replies
View Related
Feb 15, 2008
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False
Dim i As Integer, iCount As Integer
Dim numberOfPMDs As Integer
Dim PMD_Name As Integer
Dim worksheetName As String
Dim worksheets_in_file As Integer
worksheets_in_file = Worksheets.Count
worksheetName = Worksheets(2).Name
numberOfPMDs = worksheets_in_file - 1
View 5 Replies
View Related
Feb 21, 2008
On Pipe worksheet, pipe numbers 1-203 are listed in column A. Each pipe number has a flow rate that is listed in column E. I need it to look up the pipe number in column A on the Job worksheet and report the flow rate (from the Pipe worksheet) in column D for each pipe.
View 5 Replies
View Related
Aug 17, 2012
I'm using WinXP with Excel 2003 - I have a column of highway sign description data (16k+ rows).
Example:
Curve Arrow Right
Curve Arrow Left
Turn Arrow
Reversing Curve Arrow Right
Winding Road Arrow(plus many more unique entries)
I'm using SUM and COUNTIF to total the number of times "Curve", "Reversing", "Turn" and "Winding" appear in the column.
My formula is:
Code: =SUM(COUNTIF($F11:$F16196,{"*CURVE*","*REVERSING*","*TURN*","*WINDING*"}))
Which works great EXCEPT what I really want is the number of cells with any of those key words, not the total count of those words. The example above should be 5, but since row four contains more that 1 of the key words I'm getting 6.
View 4 Replies
View Related
Jan 9, 2013
In one column I have a drop down list of a dozen different initials with conditional formatting on those cells. I would also like to conditionally format an adjacent text string column based on those initials, but don't want to set up a dozen rules on each cell, one by one. If I set up the top cell with the correct rules I cannot fill the formatting in because the formula is not updated on a row by row basis, but en bloc for the range.
View 3 Replies
View Related
Jun 25, 2014
Median Indirect: I would like to find the median in a range of cells and then bring back the 2 adjacent cells
Range...............Adj Cell 1............Adj Cell 2
1.......................L1......................L2
2.......................P3......................P4
3.......................O9......................010
So the median of the range is 2, thus we would want the formulas to bring back P3 and p4
Column 1..............Column 2
P3...........................P4
View 12 Replies
View Related
Mar 24, 2014
I need to find the word 'numeric' in the merged cells of first row (always first row) and to select its corresponding 2nd row data using macro. In the attached file, M2 to P2 data to be selected.
View 3 Replies
View Related
Aug 18, 2008
I am having a hard time creating a code that would search the exact string in a cell. See sample scenario below.
1. I have a string "hello" to be searched.
2. I will search the whole string in each cell in a previously declared range.
3. If in a cell i found "kdhlsk hellodsiewjls", although "hello" string is there,
the code should still return 0.
4. But if in a cell, i found "kjdsfel ljsdlkue hello luoeww", then the code should return 1.
I have already created a code, but it will always return 1 in step#3.
View 9 Replies
View Related
Apr 12, 2013
I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Aug 1, 2014
I have an excel file, where there is a section "Additional Requirements". This section is repeated like 20-25 times in the sheet and has a group of merged cells below it to enter data as shown in the picture. Issue is that majority of these "Additional Requirements" are not filled by the user. Hence maybe only 3 or 4 are filled and I have to manually delete the rest. I tried the code below, but it doesn't do anything.Running the macro just jumps the cells slowly downwards the sheet. Maybe if the macro runs 10-15 times it reads the whole code and then moves on to the next row.8-1-2014 12-43-27 PM.png What I'm trying to achieve is:
1. for the macro to find "Additional Requirements"
2. Then check the Merged cell below it (thus the offset)
3. If this cell is blank, select this cell and the cell containing "Additional Requirements"
4. Delete entire rows of these cells/delete the selection (entirerow.delete). (I read somewhere to set a variable as selection and clear it, hence ive included in the unreadable code. This wasn't working either)
View 4 Replies
View Related
May 8, 2014
I have names like frank steven louis alex stewart
I want to move the last words of each column to a new column.i have the collections of 200 data.
View 2 Replies
View Related
Apr 28, 2009
I have four different sheets with email addresses in an excel file. There are some email addresses which are present in more than one sheet. I wanted to find these email addresses and remove its multiple instances.
I can't use the simplified version of vlookup, as I can't enter each email address to see if there is another instance.
Is there a way where the excel sheet can search within itself for duplicate values and if not delete/at least point them out, so that I can delete them manually?
View 3 Replies
View Related
Jul 8, 2014
I've got a long list of company names, i'm trying to create a formula to see if they match but the problem is the names won't match exactly (e.g it would be Joe Bloggs Limited & Joe blogg's ltd). I've thought about it and think the best way to see if they match would be to take the first word from the first cell (in this case Joe) and then search for it in the next cell and return TRUE if it exists anywhere in the cell and FALSE if not.
View 3 Replies
View Related
Jan 5, 2014
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
View 2 Replies
View Related
Jun 9, 2009
Have problems using find and the Dictionary
What Im trying to do is find a certain word in a string then return the number associated with that word
View 7 Replies
View Related
May 16, 2012
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
View 9 Replies
View Related
Dec 21, 2006
is there a formula that gives a true or false statement upon searching a list (ie A2:A6) and finding multiple entries? like, when i search A2:A6 and there are two fields that contain the word "hello", is there a function to say "true, there are multiple entries of the word 'hello'"
View 2 Replies
View Related
Nov 15, 2013
Why than going line by line on a document that has 60k rows!
I have a document with NAMES in column A and ROLES in column I. If the user has more than one role..their name will be listed in "A" for each role in "I". I'm trying to purge down a file that has 60k + rows. Lets say i want to see all the people and all their roles if they are in "PROGRAMMER_ANALYST" role...can this be done by macros? or formula?
View 2 Replies
View Related
Jul 31, 2008
I am trying to write a macro to clean up a CSV file which automatically hard codes titles throughout the spread sheet. I am getting an error on the "FindNext" method below. I am getting "Unable to get FindNext propety of the Range Class" error. Also, the code for the For loop for multiple lines does not appear to be working.
Sub cleancsv()
lastRow = Range("A1").End(xlDown).Row
pmpt = InputBox(Prompt:="What text are you looking for?", _
Title:="Text", Default:="i.e.: Finished Goods Inventory")
numrows = InputBox(Prompt:="How many rows to delete (counting original):", _
Title:="Number of Rows", Default:="i.e.: 1")
Set cell = Range("A1:A" & lastRow). Find(pmpt)
If Not cell Is Nothing Then
For l = cell.Row To cell.Row + numrows
Range("A" & l).EntireRow.delete
Next l
End If
Do
View 8 Replies
View Related
Jun 14, 2007
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
View 4 Replies
View Related
Apr 10, 2008
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
View 9 Replies
View Related
Mar 14, 2014
I would like to have a formula find a specific word in column L and return the sum from column E for the same fund from column C.
I tried using =SUMIF(L:L,"*annual*",E:E) but that gives me the sum of annual for the entire column. I need to be able to specify the fund.
word "annual" also appears in "semi annual" so I need to be able to separate the two.
View 5 Replies
View Related
Sep 30, 2009
I am trying to write a formula which finds the last instance of a number greater than 30 in a column (B). The values are not sorted from smallest to largest as they correspond to a time series (A) which needs to be preserved. Ultimately, I want the formula to return the time at which this value occurs, but I think I can do that bit using INDEX
I have a formula to give the first instance (row number) of a number above 30, which seems to work, but beacuse I don't fully understand how it works I can't modify it to give the last instance. The formula is:
=MATCH(1,INDEX(--(B2:B883>=30),0),0)
Having only just learnt how to use MATCH and INDEX, I thought each should have 3 arguments, so I'm confused about how the 4 arguments here work. Also I can't find much on using logic functions within INDEX. Can someone explain this formula, and suggest how I might go about finding the last instance please?
View 6 Replies
View Related
