I am really stumped at this particular point in my coding. What I am trying to do is to have a user input an ID number. When they click OK, I want to find the ID number and then subtract 1 from a number that is 13 columns over. So if the ID number is "123456789" and that matches the value in A3, I want to subtract 1 from the amount in M3 (leaving the new value in cell M3). So, if M3 was 30, now it would be 29.
View 2 RepliesABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
ABCDEG
F HIJK
I have two columns in a spreadsheet.
In cell "$D$3" is the word "Period 1".
I want to be able to do the following.
Double click on cell D3, where the word period 1 is.
VBA then looks up that period in column B, and finds the corresponding weeks for period 1 from column A.
I then want VBA to list these weeks next to the period 1 I double clicked, so in column E.
I have attached a spreadsheet as an example.
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False
Dim i As Integer, iCount As Integer
Dim numberOfPMDs As Integer
Dim PMD_Name As Integer
Dim worksheetName As String
Dim worksheets_in_file As Integer
worksheets_in_file = Worksheets.Count
worksheetName = Worksheets(2).Name
numberOfPMDs = worksheets_in_file - 1
On Pipe worksheet, pipe numbers 1-203 are listed in column A. Each pipe number has a flow rate that is listed in column E. I need it to look up the pipe number in column A on the Job worksheet and report the flow rate (from the Pipe worksheet) in column D for each pipe.
View 5 Replies View RelatedI have a sheet where in one column, the word "high" will be repeated. I need to find these multiples and then list down in a seperate column the text relevant to each of those multiples (contained in an adjacent cell). I.e if A1 & A3 hold the text "high", take the corresponding values in b1 & B3 and list them in new column C (C1 & C2 continuing in sequential order). I have searched the forums but i can' t seem to find anything.
View 9 Replies View RelatedMedian Indirect: I would like to find the median in a range of cells and then bring back the 2 adjacent cells
Range...............Adj Cell 1............Adj Cell 2
1.......................L1......................L2
2.......................P3......................P4
3.......................O9......................010
So the median of the range is 2, thus we would want the formulas to bring back P3 and p4
Column 1..............Column 2
P3...........................P4
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies View RelatedI have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.
Here is an example spreadsheet to help explain
I have attempted this by writing this formula ...
Picture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
I have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks.
Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B
1 Car,
1 Taxi,
2 Bus,
2 Lorry,
3 Skateboard,
3 Bike,
1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
Based on a trigger point (being a month), and the number of times the expenditure is spread over (factor), can I formulaize the repetition of the figures?
Sheet1 *CDEFGHIJKLMN5***Trigger Points**Desired result via formulae
**6CostFactor*JunJulAugSept*JunJulAugSept7
£ * * * *10,000 2**1**** £ * * * *5,000 £ * * * *5,000 *8 £ * * * * *6,000 3*1**** £ * * * *2,000
£ * * * *2,000 £ * * * *2,000 *9 £ * * * * *8,000 1***1**** £ * * * *8,000 *
How would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies View RelatedI'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I have a matrix in excel to show % and $ for multiple columns - set up like this:
Rows Part 1 Part 2 Part 3
Criteria 1 % $ % $ % $
Criteria 2
Criteria 3
the $ columns are conditionally formatted to highlight the top 10 values on the matrix. is there a way to have the corresponding % cells also highlighted? The % and $ aren't both top 10, so the % would have to be highlighted based on the $ top 10 cells.
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I have a worksheet with following data in 1 tab.
[TABLE]
Seq Class
SE110
SE270
SE110
SE370
SE310
SE110
SE170
SE370
[/TABLE]
In a different tab I want to calculate the unique count of sequence for a specified class.
In above eg: for class 10 it should return 2
I would like a macro that deletes rows based on having two blank cells in adjacent columns. I have achieved this with the following code however i need it to only delete rows below a certain row. How would i achieve this?
Sub DeleteBlankARows()
Dim r As Long
For r = Cells(Rows.Count, 30).End(xlUp).Row To 1 Step -1
If Cells(r, 3) = "" And Cells(r, 4) = "" Then Rows(r).Delete
Next r
End Sub
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedI have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies View RelatedI have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
create a macro that will find and calculate based on the details of 4 columns on the same spreadsheet.
Basically, here is what I need to do:
1. Need to calculate how many QTY IN (Column F) and PALLETS IN (Column I) of a specific PART# (Column A) and LOT CODE (Column B) For example if enter a PART # and LOT CODE, it will calculate how many QTY IN and PALLET IN of that PART # and LOT CODE.
2. Need to do the same for QTY OUT (Column G) and PALLETS OUT (Column J) also.
3. Output should contain the PALLET # , QTY IN and PALLETS IN based on the PART # and LOT CODE search. I just want to simplify the search function in this spreadsheet because it is very cumbersome if you need to find how many items left for that PART # and LOT CODE.
Attached is the spreadsheet..
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
In the chart I attached there are 20 columns and 7 rows. The calculations are as follows: K in first period - 8 (given). product per worker (y) - 2*K^(1/3) = 4. Total invesment - s*y - s (savings rate) is given as 0.1 and y was calculated in the previous line. s*y = 0.1*4 = 0.4
Depreciation on capital - deperciation rate is set at 2.5% (0.0025) so the depreciation is 0.0025*k = 0.0025*8 = 0.2. Net investment = Total investment (0.4) -Depreciation (0.2) = 0.2. Consumption per worker = product per worker (4) - Net investment (0.4) = 3.6
Growtn in product per worker - Can only start calculating from next period. It is (yt-yt-1)/yt-1. (Next year's product per worker minus this year's product per worker, the answer is divided by last year's product per worker).
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached