Macro: Copy A Word From A Column To Another Automatically
Jul 20, 2008
On the data sheet I attached you can see easily what I am trying to do:
The macro should do something like this basically:
Column A there is a entry like "L110E (CST_PRG-Wheel Loaders-E series models)"
Lets say we have 10.000 entries more or less like this.
Macro should do this:
* Take first word for example in this case "L110E" and copy into column D same row.
* Take second word's second part in this case only "PRG" and copy into column B same row.
* Take the 3rd word between - - in this case only "Wheel Loaders" and copy into column C.
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB: Sub Macro0CopyFromCSV() 'Insert a blank row and format it in Master workbook Rows("3:3").Select Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed". If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
I use an excel workbook that contains around 20-30 output tables/ranges and i would to have a macro which will enable me to open a specific word document and paste these tables/ranges from excel into the word document. I am unsure as to how to get excel and word to "talk to each other"???
To make things more difficult i would like to be able to set the paste location in the word document, and ideally i would the copy and paste function to be a normal copy and paste and not a paste special as the tables/rnage in excel have already been formatted correctly and column widths adjusted to fit the margin of the word document.
Currently I select the range in excel, switch to word and paste then continue until all tables/ranges are pasted. Not difficult but as certain calculations change these tables/ranges need to be re-copied and pasted to word which gets frustrating.
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
I have a macro set up in Excel that formats and deletes rows matching a citeria. Once the macro runs I then manually copy the data across into Word. I would like to automate this.
I would like the macro to copy over any cells containing data iinto a new word document. I also have standard text that I would like to include at the beginning and end of the word document. With the excel data being placed in the centre.
I have searched the web and tried a couple of macros with no luck. All the macros state "' requires a reference to the Word Object library: ' in the VBE select Tools, References and check the Microsoft Word X.X object library"
I am unsure how to reference this - but I have checked and found that the object library ticked is Microsoft Word 11.0 Object Library.
I have a workbook with 2 sheets; Forecast and Resources.
On the "Forecast" tabb there are 2 columns; Column A: "Company Name" and Column B: "Forecast"
The "Resources" sheet is for breaking the forecasted amount from the Forecast sheet down to the various resources who will be generating the forecated revenue. Column A lists the Company name and each column after that lists the resource.
Unfortunately, entering the data requires bouncing between the 2 sheets.
Question:
This request has 2 parts.
Part 1) Any time a value is forecasted for a company listed on the Forecast tab, I would like the system to automatically copy the name of the company (column a) to column A of the Resource tab. (initially the row 2 as row 1 is a header, and then subsequent entries to the next available row)
Part 2)
Any time a value is forecasted, a window which lists a predefined set of resources will appear allowing the user to assign an amount to each of the resources therein AND then, when the window is closed, that data will be used to populate the corresponding row/coumn on the Resources Tab.
I'm not sure that I'll be able to explain this clearly, so I've attached an example. There are 3 columns - Issue, Action Group and Status. Many Issues belong to the same Action Group and others do not belong to any Action Group. The is also a Status summary section that has the total Issues and Actions associated with each status. For example the Status called Resolved could have 10 issues and 5 Actions (including blanks). The problem is that I can't figure out a way to get the total for the Actions. As I said this explanantion isn't great, so the attached sheet
Automatically copy rows to new sheet in excel when column marked with an X. If a column is marked with an X, I need to copy this row to a new sheet. So if a column C is marked with X, I need to copy this row in Sheet2 , if a column D is marked with and X, I need to copy this row below next empty row in Sheet2, if a column E is marked with X, I need to copy this row in next empty row in Sheet2.
If a column is marked with an X I need to copy this row to a new sheet. So if a column C is marked with and X I need to copy this row to Sheet2 , if a column D is marked with and X I need to copy this row to Sheet3 and if a column E is marked with and X I need to copy this row to Sheet4., Please can someone help with the VBA code to make this work?
I need my macros to search for the word "Cancel" or "Cancelled" in columns "T" and "U". Once found, I need the macros to make that entire row an opaque shading.
There will be other wording in these cells that contain "Cancel" or "Cancelled". Is it possible for the macros to search in the sentence and find the words "Cancel" or "Cancelled"
I have a table of 5 columns (each of 50 length) that is automatically refreshed (i am getting the data from web)after an interval of 5 minutes. I want the first column to be sorted alphabetically after every 'refresh' command, that has been executed by the excel. i have tried recording the macro and then running it on keystroke of 'ctrl + m'...the table surely gets sorted out but i can't be pressing ctrl+m every 5 minutes. auto-sort that is required to be executed after the auto refresh command..
I need a little assistance opening a Word file via an Excel macro. The two files are linked and upon opening, the Word file asks if the links should be updated. I need this to automatically be "Yes" everytime the file is opened.
I can trying to let the user type a word in to cell A1 and then have Excel remove the rows that contain the word. But VBA below just seem to delete all nonblank rows?
sub delete2() Range("a2:a200").Select For Each cell In Selection If cell.Value = A1 Then cell.ClearContents End If Next cell Range("a2:a200").Select Selection.SpecialCells(xlCellTypeBlanks).EntireRow.Delete end sub
I have created an Excel spreadsheet that collects info from a userform; we are using this as a issue log.
However, at the same time, upon completion of the log, the engineer then needs to fill out the essentially the same information in a Word form for sending off to the customer. I was thinking that perhaps this could be done by using a mail merge but from past experience this generally isn't very user friendly or quick.
Is it possible to automate this somehow using VBA such that when Enter is clicked on the form, not only does it fill in the next available line in the log spreadsheet but it also opens Word and populates the required fields with this same info?
I have a worksheet that contains multiple task lists, each having two columns, a "Priority" field and a "Description" field. The data should be sorted by Priority first and by Description second. The header row is 5 and the data is in rows 6 through 50. The first list is in A5:B50, the second C5:D50, and so on until the sixth list in K5:L50. I have a macro that works for one task list, but cannot get it to function for multiple task lists. Below is the macro that functions for the first task list. It is in the code for the sheet tab.
Option Explicit Private Sub Worksheet_Change(ByVal Target1 As Range) If Target1.Column = 1 Then
I'm trying to make a spreadsheet template that will find and replace all instances of a given word with a bold or highlighted version. However, I do not know how to make this process passive and automated. That is, as soon as I type certain words, they should be auto-corrected. Is there a way to set excel so it will recognize certain words and replace them? Is there a way to do this in the settings? I don't think a macro is the right answer in this case, so I put it in the general thread.
