I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 RepliesI need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
I need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
Basically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.
I am manually scrolling through Excel right now to find all blank cells in column L. Some cells have dates, others are blank. IF L is BLANK, I go to row K and copy/paste row K to row L. IF K is BLANK, I got to row I and copy/paste to row L.
Is there a statement I can put into row L to basically say "If blank copy/paste from row K. If row L and K are blank go to row I and copy/paste to L." ???
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies View RelatedI would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12.
On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
If cells in column J are not blank, values in column K must be copied from column I.
If not, i.e. cells in column J are blank, values in column K must be copied from column I + the fixed value in cell $C$2.
Can't get "if" nor "notblank" formula working.
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
Is there a way to find the first blank cell in a column using a formula?
View 9 Replies View RelatedI need a macro to copy and paste data from Col A to Col B. But I need it pasted 1 row up. In other words if A6 has data I need it pasted in B5 and Bolded. I got a start but don't know how to finish.
Dim ii As Long
For ii = lastrow To 6 Step -1
If Not IsEmpty(. Range("A" & ii).Value) Then ****.Range("A" & ii).Copy*****
Next ii
I have a long list of values in column F of my worksheet. These values appear in random rows for example: cell F3 is 27, cell F9 is 7, cell F13 is 27, cell F20 is 9 ... The data is not evenly spaced any specific number of rows apart, but there are spaces (rows which are blank in column F).
I would like to put all of these values in column G but without any blank cells, and keep the order the same as well. So using the above example, Id like a way to make cell G1 read 27, G2 read 7, G3 read 27, G4 read 9.
Column F could be a very long column im not sure exactly how long as the data is being put in periodically. Some sort of formula that I could just drag down that would read the values from column F and put them in column G with no places would be ideal.
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
I have this table, which can be seen as a basic custom gantt chart: KLRWo.png
And I would like to fill the A column with start dates, based on the first filled cell of the range on the same row, and the header value of its respective column (row 1). It's easier to show my expected result than write it actually:
WiMZH.png
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
View 10 Replies View RelatedI have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedWhat I have are invoices that span an entire month that I need to convert into a format for the billing department. The columns I have right now are: "Invoice Number"Cost CenterAccountFundType of Service" Date of Completion"Unit PriceQty Total Price
I need to generate a file with the headings as: Cost CenterFund"Date of Completion"Account Total Price. Since Total Price only appears on the rows that have the final information I need, I want to have a script that grabs every line in which the Total Price column has data, generate a file of the summary lines, then throw that through another macro to reformat it into the final format, or just do it in one step. In summary I need to grab rows where Column I is not empty, whats the best way to do this?
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
The attached picture shows the problem. I want to automatically fill the blank cells in column A with the value immediatey above them. I want to do the same for column B and C. I have never worked with VB except to copy key strokes.
View 3 Replies View Relatedhow to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
I got 3 columns of cell values as follows:
Demo 1
COL A COL B COL C COL D
_ 12 14 16
_ 32 12 18
_ EA LW RA
Demo 2
COL A COL B COL C COL D
12 12 14 16
32 32 12 18
EA EA LW RA
14
12
LW
16
18
RA
Can data of the 3 columns be copies (by vba code) to the blank col A in the exact sequence as shown in Demo 2?
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View Related