Find Non-blank Cell In Column Then Copy Row
Jun 5, 2008
Basically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
View 7 Replies
ADVERTISEMENT
Aug 14, 2013
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies
View Related
Mar 4, 2008
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12.
On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
View 9 Replies
View Related
Jun 23, 2009
If cells in column J are not blank, values in column K must be copied from column I.
If not, i.e. cells in column J are blank, values in column K must be copied from column I + the fixed value in cell $C$2.
Can't get "if" nor "notblank" formula working.
View 6 Replies
View Related
Aug 7, 2013
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
View 1 Replies
View Related
Jun 25, 2013
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
View 9 Replies
View Related
Jun 19, 2007
Is there a way to find the first blank cell in a column using a formula?
View 9 Replies
View Related
Jul 15, 2009
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
View 8 Replies
View Related
Nov 5, 2006
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
View 5 Replies
View Related
Jan 17, 2014
I have this table, which can be seen as a basic custom gantt chart: KLRWo.png
And I would like to fill the A column with start dates, based on the first filled cell of the range on the same row, and the header value of its respective column (row 1). It's easier to show my expected result than write it actually:
WiMZH.png
View 6 Replies
View Related
Apr 20, 2006
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
View 4 Replies
View Related
May 30, 2008
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
View 9 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Jun 6, 2014
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies
View Related
Dec 13, 2007
What I have are invoices that span an entire month that I need to convert into a format for the billing department. The columns I have right now are: "Invoice Number"Cost CenterAccountFundType of Service" Date of Completion"Unit PriceQty Total Price
I need to generate a file with the headings as: Cost CenterFund"Date of Completion"Account Total Price. Since Total Price only appears on the rows that have the final information I need, I want to have a script that grabs every line in which the Total Price column has data, generate a file of the summary lines, then throw that through another macro to reformat it into the final format, or just do it in one step. In summary I need to grab rows where Column I is not empty, whats the best way to do this?
View 3 Replies
View Related
Apr 4, 2008
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
View 4 Replies
View Related
Sep 30, 2006
I got 3 columns of cell values as follows:
Demo 1
COL A COL B COL C COL D
_ 12 14 16
_ 32 12 18
_ EA LW RA
Demo 2
COL A COL B COL C COL D
12 12 14 16
32 32 12 18
EA EA LW RA
14
12
LW
16
18
RA
Can data of the 3 columns be copies (by vba code) to the blank col A in the exact sequence as shown in Demo 2?
View 2 Replies
View Related
Dec 10, 2006
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies
View Related
Jan 30, 2007
I need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies
View Related
Aug 18, 2014
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
View 7 Replies
View Related
Feb 23, 2008
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Mar 18, 2009
I'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.
View 11 Replies
View Related
Apr 21, 2013
In table 1 you will see that not all rows contain data (this is because i have removed it previously with a macro) the second table shows what i want the macro to do but without deleting rows:
A
Hiddenrow with formula
B
C
[Code]....
So basically i would like a macro to search for the first none blank value in column A and copy the row to the first available blank row , it also needs to blank out that row once done. i.e row 3 would be moved up to row 2, 5 up to 3, 7 up to 4 etc etc.
The hidden rows contain formulas which cannot be deleted or my ws goes Pete Tongue.
View 6 Replies
View Related
Oct 28, 2006
I am trying to create a macro that will find the next blank column in a specific worksheet, not just the active worksheet.
View 5 Replies
View Related
Jul 12, 2007
I have an Excel worksheet with two rows. Row one has months, row two has unit counts. I simply want a formula that will find the first (leftmost) date where a unit count occurs, returning the month of the first unit data point. I've seen several forum questions on how to search/ lookup the right-most non-blank/non-zero data point, however I would like the first, leftmost point. I have been unable to modify the forumula.
View 6 Replies
View Related
Mar 21, 2014
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
View 6 Replies
View Related
Oct 4, 2013
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies
View Related
Oct 24, 2007
I am manually scrolling through Excel right now to find all blank cells in column L. Some cells have dates, others are blank. IF L is BLANK, I go to row K and copy/paste row K to row L. IF K is BLANK, I got to row I and copy/paste to row L.
Is there a statement I can put into row L to basically say "If blank copy/paste from row K. If row L and K are blank go to row I and copy/paste to L." ???
View 4 Replies
View Related
Jul 28, 2006
I want to find the Row Number, not necessarily the cell value, of the last non-blank entry in a Column.
If the address of this row is found, then that could also be useful. I believe there are some simple Excel functions to do this, maybe involving the X1Up feature. I've searched the threads and haven't found a clear answer this.
Below is code that I custom wrote, but its long and tiresome to use.
'The purpose of this sub is to find the last filled row in a column
'Knowing this last row is useful for telling later
' looping operations which row to stop on.
'The logic of this sub is that it will look down a column.........
View 9 Replies
View Related