i created a function called ColorFunction
but when i try to access the function it says
Book1.xls!Module1.ColorFunction
when i select this it says
Function Arguments
No help available
The function takes no arguments
Formula result =
but when i run it for the first time
it worked, but when i try to use again after saving the book .
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View RelatedI keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
View 5 Replies View Relatedmy formula called ' conversion' used to convert foreign money in EUR does not
seem to work. My formula gives a value error. I wonder why...
Function Conversion(Position As Integer, Currency As Integer) As Integer
Dim USD As Integer
Dim GBP As Integer
Dim CHF As Integer
Dim JPY As Integer
Dim NOK As Integer
Dim NZD As Integer
Dim SEK As Integer
Dim ZAR As Integer
Dim ISK As Integer
Dim TRY As Integer
Dim AUD As Integer
' here i give a destination to my forex quotes who are in a excel sheet
USD = Range("N9").Value
GBP = Range("N10").Value
CHF = Range("N11").Value
JPY = Range("N12").Value
NOK = Range("N13").Value
NZD = Range("N14").Value
SEK = Range("N15").Value
ZAR = Range("N16").Value
ISK = Range("N17").Value
TRY = Range("N18").Value
AUD = Range("N19").Value
it returns an error when I try to enter it. Is there a brave soul which a good eye for errors that might be able to shine some light on the error. Currently it appears the error centers around the MONTH( ) portions of the function. But each embedded function is able to stand alone and I can't imagine why they won't work together.
View 4 Replies View RelatedI am struck in using IF /AND in nested function as follows,
A1B1C1D1E1F1G1
1 3 5 7 9 32
=IF(AND(F2>G2,AND(IF(A2>1,A2,AND(IF(C2>5,C2,AND(IF(E2>9,E2),""))
(Above, A1 to >G1 are cell address , in exact rows are actual values)
I have following snippet of code. it is very simple.
Code:
Sub GetDatafromXmlToTemp()
Dim str As String
Sheets("sheet1").Select
desc = WorksheetFunction.Match("FAMILY_ID", Rows("1:1"), 0) ' gives column number for ex 4 for "D"
[Code] .....
I am getting error "Argument not optional" in line.
Code:
str = ColLetter
I am getting "Sub or Function not defined" error in the below place of my coding. I have highiglided the code which system did and this was given by one of our commite member only
[Code start here]
Windows(Fname).Activate
If Not WorksheetExists(Date1) Then GoTo ABC
Else
[Code]....
In Excel 2007, the following cell Q14 CSE formula accurately returns the row number of the first negative value in the column P array P14:P102.
{=MAX(ROW(INDIRECT(ROW()&":"&MIN(IF(P14:P102="",ROW(P14:P102)))))*(INDIRECT("P14:P"&MIN(IF(P14:P102="",ROW(P14:P102))))
Excel 2003, WindowsXP
When I type = and then click in the pivot table under group1, I am recieving a #REF error. It strange because when I do the same thing in another group (ie. group 2 or group 3, etc.) in the same pivot table I don't recieve the error?
I have been searching through your forum but I can't seem to find the solution to my problem. I have two sheets: On one sheet in cell b2 I have a validation list whose source is =Indirect(Subgroup) which gives a #ref error. However when I evaluate Subgroup, I get a legitimate range. I have attached an example of what I am trying to do.
View 9 Replies View RelatedI am having problems getting the code right for the WorksheetFunction. I have put a snip of the procedure below.
I have data that is sequentially entered into columns, always in rows 4 to 18 with the column ref increasing by 1 each time new data is entered.
After each instance of data entry into a new column I need to loop through that data and, if the a cell value matches a value in range A1:A200, to place x in column B in the same row as the match in column A. All in Sheet2.
Set cStartcell = Sheet2.Range("IV4").End(xlToLeft) ' goes to last entered column
For Each cell In Sheet2.Range("B2:B200")
Application.WorksheetFunction.If(Match(Offset.(0, -1), Sheet2.Range.("cStartCell:cStartCell.Offset(15, 0)"),""x"")
Next
I have put the problem in bold. whatever I try seems to come up as 'end of statement expected' or 'identifier or bracketed expression expected' errors. When I have managed to get rid of errors the fromula does nothing.
I am having trouble with the following code. When I put in a value in C8 that is on the list being searched (A2:A27), the Answer is still coming up as false (ie, the find function isn't finding the variable in the list, though it is there). I'm guessing I'm using incorrect syntax somewhere.
Dim Answer As Boolean
Private Sub CalcBi_Click()
Dim Pledge, Edate, PR, PPA, EEA As Double
Dim Due, Chdate As Date
If Range("C6").Value = "" Or Range("C8").Value = "" Then
Exit Sub
Else
Pledge = Range("C6").Value
Edate = DateValue(Range("C8").Value)
Set rngschedule = Worksheets("Bi Weekly Schedule").Range("A2").Offset(Application.WorksheetFunction.Match(Range("C8"), Worksheets("Bi Weekly Schedule").Range("A2:A27"), 1), 0).....................
Is there a way in which you can create an if function or similar to give a reason for why the cell of data has an error.
Basically i have some data in a table, and when a #num! error pops up id like to in the cell next to it give a sentence stating why this has happened.
E.G.
Cell A1 Cell B1
#Num! Number error due to 'x' being too small
Not sure how i can get this to work, i have tried a basic if function but that hasnt worked.
I am setting up a summary sheet that contains =indirect() functions for workbooks that don't exist yet.
I would like some kind of function that returns the =indirect() function correctly if the workbook exists and just a 0 or blank if the workbook doesn't exist.
I would like to have the indirect function in all of cells that as soon as someone creates a workbook it will update the summary sheet.
Please find the attachment in which i have mentioned all the details about the error in VLOOKUP function. I couldn't understand why I am getting that error for that single Vlookup value while others are ok.
Vlookup error.xlsm
Trring to use function edate() in VBA macro, I've activated atpvbaen.xls in Tools/Register but get compile error:"Sub or function not defined".
View 5 Replies View RelatedThis is a function to add the ascii values of a string to give a single value. Initially I wrote this as a Sub routine and it worked fine, but when making it into a function, I get this error. From a little research it appears that you can not use a string as an argument for a function call, yet that defeats the object of this particular function.
The intention of this function is that it works on a name in a given cell and the value (an integer) that is produced is then displayed in another cell, or if using it as a formula, the cell the formula is in.
I simple wrote the work "Hello" in cell A1 the ascii values of these added ignoring any spaces give 500 which is correct.
Have two worksheets in same workbook. First worksheet is "ReArrangedAddr" Which basically has a command button to click to run a "Sub" behind the second worksheet "Orig SH Register". When I click on button on first worksheet, I get error "Compile Error: Sub or Function not defined"
* * * * * code behind command button * * * * *
I'm running this line (from longer code of course), where i/g are integers and h is a range:
[Code] ......
And I'm getting run time error '1004'.
I am trying to use the Find function within some VBA code but keep encountering a compile error. Code works fine on it's own as below but doesn't work within the VBA code. I can't figure out what part of code needs to be modified.
The desired result in J2 = "Jim"
the value in cell I2 = "Jim |Anderson"
Working Function as follows:
I have a function that works out which is the last column containing data on a worksheet, but for some reason it is alwys retuning 0.
View 14 Replies View RelatedHaving problems with the code below on a 2010 Excel spreadsheet. The function flags me at first line and highlights Mid. I get a "compile error, cannot find project or library". I'm trying to set GetSheetName = m_sSheet but the GetSheetName function is not declared as returning any type.
Code:
Function GetSheetName(ByVal m_sFormula As String) As String
Dim m_sSheet As String
m_sSheet = Mid(m_sFormula, 2, InStr(m_sFormula, "!") - 2)
If InStr(m_sSheet, "'") Then
m_sSheet = Mid(m_sSheet, 2, Len(m_sSheet) - 2)
End If
GetSheetName = m_sSheet
End Function
I am writing some code where one column is selected and a value is searched for in that column. If found the code continues on its way manipulating the data. The issue is that the value being searched for will not always be there which results in an error. Is there a way that I can just tell the macro to continue running if the value is not found.
Columns("V:V").Select
Selection.Find(What:="1", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Rows(ActiveCell.Row).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Delete Shift:=xlUp
On a second question is there some code I could write that would select all the rows with the number 1 in column V and delete them rather than doing the way I am here?
I have a two set of Macros in a workbook. One is to create a command button on a sheet and other macro will run onece the created commond button is clicked.
Macro runs fine. Command button gets created, but when I click the command button to run another macro it gives error "Compile Error: Sub or Function not defined" highlighting the code "Call Add" at the code entered for sheet. This code is added by macro in the sheet1. I am attaching a sample file as well as codes.
Sub CreateButton()
Dim Obj As Object
Dim Code As String
Sheets("Sheet1").Select
'create button
Set Obj = ActiveSheet.OLEObjects.Add(ClassType:="Forms.CommandButton.1", _
Link:=False, DisplayAsIcon:=False, Left:=600, Top:=30, Width:=100, Height:=35)
Obj.Name = "InsertInvoiceButton"
'buttonn text
[code]....
I am trying to create a macro which will use the subtotal function to do a count on all the the new loans in column A. The could below is what I have tried but I am getting a run-time error 13 "Type Mismatch" error at the line highlighted in red in the code. How to write the Subtotal function in the macro.
Code:
Sub CountNewLoans()
Dim cnlFinalRow As Integer
Dim cnlRow As Integer
Dim x As String
Dim y As String
[Code] ......
I have this code, which is producing an error that says, "Only comments may appear after End Sub, End Function, or End Property. I understand the error, but what Im unsure about is how to begin the subroutine in a way such that
1. This error goes away
2. What is the correct method name for the next subroutine
(i.e.: Private Sub Declare_Variables()
How to emcompass the subroutine. The error is happening in the below code at the "Public Cat1 as Variant", "Public Cat2 as Variant".
Code:
Option Explicit
Private Sub cmdAdd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("View Lessons")
[Code] .....
Why do I get the below error when I open my workbook? The highlighted function is below.
Private Sub CommandButton1_Click()
Dim myText As Variant
If TextBox1.Value = "code" Then
UserForm1.Hide
Else
Me.Label1.Visible = True
Me.Label1.ForeColor = vbRed
End If
End Sub