ADC XE AD ADKO R Ad Know Op
ADC XE AD ADKO X Ad Know
ADC XE AD ADKOAd Know
KNE XE KN ACDA
If this is my data in Column A, I need to find the names which contains " R " and " X " in 16th digit. I can do it using find formula twice but is there a way to do it in on shot..?
The formula I'm using is =FIND(" R ",A1,16) it gives me numbers like 16, 17, 19, 20 etc but I'm interested only in 16 digit so I just filter for 16 and copy the data to seperate tab.
I am stuck trying to add another criteria to an existing formula.
On my sheet "Data" i have the following formula in column AF2
=IF(Z2="","A",Z2-AE2)
If Z2 (Payment Date) is Blank then return "A" in AF2, however if Payment Date has an actual date in the cell then minus AE2 (Received Date) from the Payment date.
This gives me the "Receipt to Pay" number E.g. 6 days from receiving to paying an invoice.
I now need to add another criteria to this and i cant fathom it.
I need to do the following:
If Payment Date (Z1) is Blank and Invoice Status (T2) is "Loaded" then Minus Received Date (AE2) from Todays Date, while also retaining the last part of original Formula Z2-AE2 if the first criteria is not met.
(I have put =TODAY() in Cell AG1 for ease).
What do i need to do to add this into the formula. Do i need to use IFS function?
What formula should I use to show "Pass" if a student passed all three subjects, "FAIL" If student did not pass in any subject and "TRY AGAIN" if he passed at least one subject? I can't seem to accurately plot "IF" formula. Should add in "AND" / "OR" as well?
cp 25% 675,000 rz 40% 18,383,541 nw 50% 8,700,000 cp 10% 4,500,000 ap 50% 1,200,000 kd 50% 49,500 sl 25% 3,200,000 bc 20% 310,000 sl 20% 3,460,000 nm 30% 6,750,000 at 50% 23,000,000 ap 30% 367,500 rn 40% 13,750,000
I have a list of commodity and percentages of success with fees in the 3rd column I need a function to count the records with multiple criteria e.g greater than 20% but less than 30%.
Second i need a function when it complies to previous formula it should give fee total pertaining to that count.
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then Range("role_count").Select Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _ xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _ , SearchFormat:=False).Activate
I have table product that include (wide 1,wide 2,thick 1,thick 2,long 1,long 2,Price) And I have table transaction than have wide, thick, long and price)
I want that price in table transaction fill automaticly from table product where ( wide between wide 1 and wide 2 ) and ( thick between thick 1 and thick 2 ) and ( long between long 1 and long 2 )
I have two documents, and I need to search data in document 1 based on information given in document 2. On document 1 I have ID number and date range and on document 2 I have ID number and date. Date needs to be in the date range, and ID numbers must be the same.
Please see tables below for the reference.
Document 1 Document 2 ID Start date End Date Data ID Date Data 11 01/01/2009 31/12/2010 Data 1 11 05/05/2011 22 01/01/2010 31/12/2010 Data 2 22 08/08/2010 22 01/01/2011 31/12/2011 Data 3 33 01/01/2012 33 01/01/2012 31/12/2012 Data 4 11 02/02/2009 33 01/01/2010 31/12/2011 Data 3
I need to count rows that meet 2 criteria. I have seen this help page http://www.ozgrid.com/Excel/count-if.htm but that counts rows with "criteria 1" OR "criteria 2"... I need to count rows that fulfill "criteria 1" AND "criteria 2" ie - count the rows that have todays date AND a cell that says "COMPLETE"
ideally it would be as easy as "=countif(A:F,"today()","COMPLETE") but that doesn't work... any way around this???
Need to use CountIFs formula to evaluate multiple conditions in the same column. Here is the formula I tried. It works for Resolved but returns 0 when i try to add Duplicate.
Also used this formula with success by referencing a cell that had "Resolved" in it but when I tried to add another cell with "Duplicate" it again returned 0.
We're selling language courses that have a different price depending on when a course is taken. We're trying to build a price quote application that needs to look up a certain school and course and price driven by a start date.
How can I build a lookup function that says: pick the price of school X and course Y when the start date falls between dd/mm/yyyy and dd/mm/yyyy?
I manage to build a look up function with MATCH and INDEX when the condition of start date is exactly matched but dont know how to instruct it to match a value between a start and end date.
I'm trying to figure out how to write a VBA Match function that can look for multiple criteria and return the row number of a successful match.
I have about 255,000 rows of data on the worksheet "Filtered". Column B contains my Item Number and Column D contains the supply source. I want to find the row where ItemNumber and SupplySource match my variables and then return the value from Column C.
I can do a match for one criteria, but where I'm having problems is getting it so the two matches are on the same row.
I am in need of creating a User Defined Function in Excel that will sum numeric values based on two text criteria. I have a large set of data in an Excel worksheet that includes a column for " Market Type" and a column for "Location ID". I would like to develop a User Defined Function that allows a new or inexperienced user of the template to use the User Defined Function to select first a "Market Type" then select a "Location ID" and get the sum of the amount those values represent. A SUMPRODUCT function in Excel works for this, but can be awkward or intimidating for a new or inexperienced user. For that reason, I am specifically looking for a User Defined Function that will simply the formula for them while at the same time maintaining the degree of accuracy I need.
I want to know the macro code to find out the oldest date in the Calculation sheet of the attachment based on two criteria.
The criteria should be if the Item ID on Calculation sheet matches the Item Id Pivot sheet and then if the Status on pivot sheet and calculation sheet matches then the macro should find out the oldest date for each item ID. And once the oldest date is identified the difference on pivot sheet should be added to the cost basis column on calculation sheet to the already found oldest date lot.
I have a few calculations I cannot solve for life of me. I know you guys can figure this out. In the example attached you will see the list of the numbers that were drawn (More numbers will be added as time continues).
I was able to use " countif" to find the total number of time each number was drawn. My delima, I need:
1. Count the number of times each number was drawn by person.
John starting in cell J7 Mary starting in cell J11
2. I need to type in 4 digits in cell J19, and find all possible combinations from the list of numbers drawn
List what combination of numbers that was drawn including the date it was drawn by person starting at cell I20 using the format as shown
I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
[Date] [Category] [Currency] [ExchangeRate] [.....], etc. 1-3-09 A USD 0,8 1-6-09 A EUR 1 1-7-09 A USD 0,7 1-8-09 B USD 0,9 1-9-09 B USD <formula>
I'd like to have the value of <formula> looked up in older records. Currency and category should match and it should pick the exchange rate with the maximum date.
Which formula and what syntax should I use to have this done?
I can't seem to find the answer to this. In VBA, how do you Find a cell or row based on multiple criteria? All I need is to find it's location. If it helps, here's an example:
Sheet 1 contains source data: Date Name Time Complete
Sheet 2 contains an interactive worksheet using this data. On Sheet 1 there's an entry: 9/12/2006 George 03:30 PM
Sheet 2 displays those records with adjacent cells for entering data. When data is entered, I need the system to go back to Sheet 1, find the entry that matches this one, and put an "x" in the Complete column.
I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
My spreadsheet has 6 columns and 10 rows containing various numbers. Using "FIND" I can easily locate any given number in any column or row. Problem is rather than trying to find just one number at a time I would like to find 6 specific numbers [or any of the 6 specified numbers] in any row at once. I've tried entering the 6 numbers but it will not allow the search. I've tried separating the numbers using commas, colons, semi-colons, etc., but to no avail. Is there a way I can enter 6 specific numbers at once in the "FIND" which will allow "FIND" to find my numbers in any row?
I am trying to solve a problem. I am currently using this formula = SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel MARKETING 200612 -10 MARKETING 200701 -25 MARKETING 200708 -50 ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
I have a range of cells, for this example I will use 2.
Cell E17 = 77/170 Cell E18 = 8/9
Using the following formula: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)))
This bring back an #VALUE! Error as the second part of the formula keeps picking up "/9" however the first part works fine, displaying "170"
Now if I use: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)-1)) It all works. The problem is that I need this to be automatic using the above way means having to add a "-1" to every formula for a cell with only 1 char to be added.
Using the formula: =SUM(RIGHT(E17,FIND("/",E17)-1))+SUM(RIGHT(E18,FIND("/",E18)-1)).....
I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.
I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!
