I am stuck trying to add another criteria to an existing formula.
On my sheet "Data" i have the following formula in column AF2
=IF(Z2="","A",Z2-AE2)
If Z2 (Payment Date) is Blank then return "A" in AF2, however if Payment Date has an actual date in the cell then minus AE2 (Received Date) from the Payment date.
This gives me the "Receipt to Pay" number E.g. 6 days from receiving to paying an invoice.
I now need to add another criteria to this and i cant fathom it.
I need to do the following:
If Payment Date (Z1) is Blank and Invoice Status (T2) is "Loaded" then Minus Received Date (AE2) from Todays Date, while also retaining the last part of original Formula Z2-AE2 if the first criteria is not met.
(I have put =TODAY() in Cell AG1 for ease).
What do i need to do to add this into the formula. Do i need to use IFS function?
What formula should I use to show "Pass" if a student passed all three subjects, "FAIL" If student did not pass in any subject and "TRY AGAIN" if he passed at least one subject? I can't seem to accurately plot "IF" formula. Should add in "AND" / "OR" as well?
cp 25% 675,000 rz 40% 18,383,541 nw 50% 8,700,000 cp 10% 4,500,000 ap 50% 1,200,000 kd 50% 49,500 sl 25% 3,200,000 bc 20% 310,000 sl 20% 3,460,000 nm 30% 6,750,000 at 50% 23,000,000 ap 30% 367,500 rn 40% 13,750,000
I have a list of commodity and percentages of success with fees in the 3rd column I need a function to count the records with multiple criteria e.g greater than 20% but less than 30%.
Second i need a function when it complies to previous formula it should give fee total pertaining to that count.
I have table product that include (wide 1,wide 2,thick 1,thick 2,long 1,long 2,Price) And I have table transaction than have wide, thick, long and price)
I want that price in table transaction fill automaticly from table product where ( wide between wide 1 and wide 2 ) and ( thick between thick 1 and thick 2 ) and ( long between long 1 and long 2 )
I have two documents, and I need to search data in document 1 based on information given in document 2. On document 1 I have ID number and date range and on document 2 I have ID number and date. Date needs to be in the date range, and ID numbers must be the same.
Please see tables below for the reference.
Document 1 Document 2 ID Start date End Date Data ID Date Data 11 01/01/2009 31/12/2010 Data 1 11 05/05/2011 22 01/01/2010 31/12/2010 Data 2 22 08/08/2010 22 01/01/2011 31/12/2011 Data 3 33 01/01/2012 33 01/01/2012 31/12/2012 Data 4 11 02/02/2009 33 01/01/2010 31/12/2011 Data 3
ADC XE AD ADKO R Ad Know Op ADC XE AD ADKO X Ad Know ADC XE AD ADKOAd Know KNE XE KN ACDA
If this is my data in Column A, I need to find the names which contains " R " and " X " in 16th digit. I can do it using find formula twice but is there a way to do it in on shot..?
The formula I'm using is =FIND(" R ",A1,16) it gives me numbers like 16, 17, 19, 20 etc but I'm interested only in 16 digit so I just filter for 16 and copy the data to seperate tab.
I need to count rows that meet 2 criteria. I have seen this help page http://www.ozgrid.com/Excel/count-if.htm but that counts rows with "criteria 1" OR "criteria 2"... I need to count rows that fulfill "criteria 1" AND "criteria 2" ie - count the rows that have todays date AND a cell that says "COMPLETE"
ideally it would be as easy as "=countif(A:F,"today()","COMPLETE") but that doesn't work... any way around this???
Need to use CountIFs formula to evaluate multiple conditions in the same column. Here is the formula I tried. It works for Resolved but returns 0 when i try to add Duplicate.
Also used this formula with success by referencing a cell that had "Resolved" in it but when I tried to add another cell with "Duplicate" it again returned 0.
We're selling language courses that have a different price depending on when a course is taken. We're trying to build a price quote application that needs to look up a certain school and course and price driven by a start date.
How can I build a lookup function that says: pick the price of school X and course Y when the start date falls between dd/mm/yyyy and dd/mm/yyyy?
I manage to build a look up function with MATCH and INDEX when the condition of start date is exactly matched but dont know how to instruct it to match a value between a start and end date.
I'm trying to figure out how to write a VBA Match function that can look for multiple criteria and return the row number of a successful match.
I have about 255,000 rows of data on the worksheet "Filtered". Column B contains my Item Number and Column D contains the supply source. I want to find the row where ItemNumber and SupplySource match my variables and then return the value from Column C.
I can do a match for one criteria, but where I'm having problems is getting it so the two matches are on the same row.
I am in need of creating a User Defined Function in Excel that will sum numeric values based on two text criteria. I have a large set of data in an Excel worksheet that includes a column for " Market Type" and a column for "Location ID". I would like to develop a User Defined Function that allows a new or inexperienced user of the template to use the User Defined Function to select first a "Market Type" then select a "Location ID" and get the sum of the amount those values represent. A SUMPRODUCT function in Excel works for this, but can be awkward or intimidating for a new or inexperienced user. For that reason, I am specifically looking for a User Defined Function that will simply the formula for them while at the same time maintaining the degree of accuracy I need.
I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
I am trying to solve a problem. I am currently using this formula = SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel MARKETING 200612 -10 MARKETING 200701 -25 MARKETING 200708 -50 ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.
I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria: First Letter of the Unique ID in column "E" - O, M, or L Program Type in Column "F" - U or R 1. O-U = U 2. O-R = RU 3. M-U = U2 4. M-R = R2U 5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB: Option Explicit Sub test() Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long Set dic = CreateObject("Scripting.Dictionary")
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background: -- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook -- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing. In the entire workbook, I want to add 1 (counting function) only when: R1=2 AND E1>F1 or S1=2 AND G1>H1 or T1=2 AND I1>J1 U1=2 and K1>L1 on each appropriate sheet in the workbook.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4 89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g. AAA blue BBB orange AAA round CCC smelly AAA elongated
Worksheet 2 I want to show: A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g. AAA blue round elongated BBB orange CCC smelly
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113 ArkansasLife Health11114ArkansasLife Health
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.
