I have a range in column A. which will vary time to time.
I need to find the row reference(say A99) that is end of the range. Then I need to use that row ref in another formula.
How to do this without VBA?
I have a file here included which has 8 + columns. I normally have to go through each column and find when the references start and delete everything below it. If i could have a macro find where the references start in each column and delete on down that would be a huge time saver.
#REF!
#REF!
#REF!
#REF!
Thats the example of the reference i run into, i was thinking of a macro to find where the REF starts and delete that cell and everything on down.
I have a table of some numbers, and along the left side is a column representing what each row of data is. So in this case, it is a list of letters. What I'm doing is in each column of the data, I find the maximum number, and then I want to have it list below that what letter that maximum number is from. Here is an example:
View 2 Replies View RelatedI am building a Workbook which takes data from SheetA and inserts it into SheetB.
Part of the data is only entered when a positive value exists.
I then do an export from SheetB.
The problem is that I need to get the column number and pass it to the cell reference based on the field name in row 1.
Dim sFindstring As String
Dim rFindcell As range
Dim iR As Integer
Dim iC As Integer
sFindString = " Find this string in the cell"
'Using cells find the findstring
Set rFindCell = Cells.Find(What:=sFindString, After:=[A1], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
'OK so look here
iR = 3
'I am trying to pick up the column number
iC = rFindCell.Column
rFindCell throws an object or with block variable not set error. Is there some property that I need to set.
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I have a value on column A , I need to find the reference on a range from column G to O so value from O pulls to column B
Example
Columna A :Has a box ref CJB2441ALAJ
Column B: I need the answer to show
Colomn G to O have a country name just for that reference
So If use Vlook up nothing shows up.
Is there another way to look this value within the range that I need?
I have a spreadsheet with a column showing dates (dd/mm/yyyy). I need the column next to it to display the month only (Jan,Feb etc).
How do I create a column to show the month only using the date column as a reference.
I need to find a formula that will find letters in a referance, for example i have referances like - MNE DJM & ZZPAR i need to find a formula that will find me the ZZPAR looking for "ZZ" i then want this to tell me what tpYe of referance number it is and put this into column Z.
Normal referance number like DJM and MNE i want this to show as "BROMLEY"
aND ZZPAR as "Chester"
I have tried something like the following but this is not working
I want to get value from reference one column and return value by corresponding row from another column. This can be done by vlookup column. But it find value from 1st column and return value from given relative column. That mean find from Left column and return value from right side given column number.
But I want find from Given column number and return value from given left column. For Further detail see the Attached file.
I am writing a function that opens up an external excel document, identifies a string in a certain range and then i also want it to return a cell reference for that string including the number of rows beneath the cell that the string was found in.
View 6 Replies View RelatedI needed to know how to find the closest match to a reference number
regardless of whether its larger or smaller. I did a search and found a post
back in March that said to use the following:
=SUMPRODUCT(((ABS(list-target))=MIN(ABS(list-target)))*list)
I applied it to my application and it works, I just have no idea why. Can
anyone explain this formula to me or tell me where I can find a good
resource.
If column B is not empty, I want the corresponding cell in the same row of column A to contain the value "1".
View 9 Replies View RelatedI Basically need to use DATA in Column D of my file to add a ROW and then use Column C to name that new ROW added...
Example: [URL] ........
Currently, I have a standard vlookup forumla that looks like =Vlookup(B2,Sheet2!A:G,5,false)
However, the data on sheet two is ever expanding--each month, specifically. And I need to return the most recent (so, rightmost filled) column. Right now, the column is 5, but next month it will be 6 and so on and so forth.
I'm having some difficulties in defining my formula. I'm pretty sure that this should be possible.
I have a table containing values and dates. For each change in dates, I should summarize every value for that date. I cannot use the autosummarize function, because I do not want the sum to be beneath the values, rather in a column to the right of the values.
I have created a formula which checks for a change in date: =IF(C15=C16;0;1) where the C column contains the dates. Basically I say that the Index column should contain a 0 if the date is the same as previously registered, 1 if it is a new date.
The index column is used in some conditional formatting rules, so I would like to keep it anyway.
i want to search OK7V0T in all cells and return the cell reference beside matching data row
serial 1serial 2serial 3
box-4OK4KCUOK4KI0 OK4LLS
box-4OK60ZDOK62AP OK62QU
box-4OK6TA5OK6TBP OK6TFW
I'm in the leadup to my A2 ICT controlled conditions piece where i have to make an Excel system. My chosen subject for this is to use the school house points system. I'm going to make a system where the results of house matches are inputted and points are awarded accordingly.
I just have a couple of queries after looking at my initial designs.
1. Is it possible to get excel to look through a sheet, find a text reference, then bring up something in a cell located in the same row? For example, for it to locate one of the House team names, then go along the row and find the ammount of house points they have in order to make a total for them. Is this also possible over a number of sheets? (In order to keep a running total on a separate sheet).
E.G. House, Games Played, Wins, Losses, Draws, House Points
2. For the house cross country event they use a different system which differs from everything i have designed. What i basically need to do is be able to use a drop down against each finishing position where you can select one of the four house teams, then it takes the points won for that finishing position and puts them into a table.
Is there a way to Cross-Reference two sheets to find the duplicates and highlight them or another way of making it defined? I do not want them deleted, just need to be able to tell who the duplicates are.
Sheet 1 data has
A1 - Email Address B1 - Contact Name
Sheet 2 data has
A1 - Email Address B1 - Contact Name
I want to be able to find the duplicated email address' in sheet 1. And both spreadsheets have over 10,000 email address'. Is this possible?
How can I modify the following formula to find the contents of reference cell, for example if the cell reference (G$3) is equal to 9 I want it to use 8 instead.
Code:
IF(ISERROR(INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0))),"",
INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0)))
I tried using G$3-1 but this doesn't appear to work.
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedThis is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
Please refer to attached sheet.
I have monthly data for 3 stores as shown.
I want to know if any data exsit at certain cell location.
See data in Cell X1:Y4
For Store1:
I want to check if any data in cell reference (10,12), where 10 and 12 is variable and values will be in cell Y2 and Z2 respectively and it will change month to month.
If I have data in this cell reference, then AA2=TRUE, if no data then AA2=FALSE
For Store2:
I want to check if any data in cell reference (110,12), where 110 and 12 is variable and values will be in cell Y3 and Z3 respectively and it will change month to month.
If i have data in this cell reference, then AA3=TRUE, if no data then AA3=FALSE
For Store3:
I want to check if any data in cell reference (210,12), where 110 and 12 is variable and values will be in cell Y3 and Z3 respectively and it will change month to month.
If i have data in this cell referance, then AA4=TRUE, if no data then AA4=FALSE
In a formula, how can I reference the first value in a column of numbers when the row number of that first number is not constant [ie] the row number changes regularly from day to day as I insert new rows at the top of the column each day?
View 7 Replies View RelatedI'm trying to revise a salary payments workbook that isn't set up so well and I'm struggling with finding a good way to enter payments from an old sheet onto a new sheet. The values (for example) I want to appear on the new sheet are in range C2:AQ2 on the old sheet. Instead of going left-to-right, I want them to appear from top-to-bottom. The first formula I wrote was just a simple:
View 5 Replies View RelatedI have a data entry spreadsheet that contains 120 data entry panels each of 10 rows. Each panel is separated by 3 rows (1 of which is hidden). When entering data to the panel the user is required to enter a date in column F of the data entry panel. The number of used rows in each data entry panel can vary from 1 to 10.
The entry of a date in the first Column F cell in each entry panel stamps today's date in Col F in the first row below each data panel (the hidden row) and that date is then linked to a separate summary sheet to show the date of data entry. The code I'm using for the date stamping routine is below, and although it works it is painfully slow and I'm sure very inefficient. I've had to break the code into the three sections as shown below because there seems to be a limit to the number of individual cells I can reference in each of the range statements. (Is there a limit or is the length of the range statement causing some other problem?)
I'd like to know if there's a formula concatenation I could use that, when I reference one of a columns cells elsewhere on a sheet, will tell me the name of the column it came from if I assign that column a name. I don't know anything about VBA but if that's the only way I'll try to figure it out. Excel 2013
If a8 said 55 under a column called Qtr 4 then a reference to A8 would show 55 (Qtr4)
I could always simply use an absolute reference for the beginning of the column but if there's a faster way where I could do these on the fly I'd prefer that
explain with an example.
Cell A1 =A2/MAX(A2:A5)
Cell A2 1
Cell A3 2
Cell A4 3
Cell A5 4
Cell A1 is 0.25 right? Right. Now insert a cell (or row) between cell A1 and A2. Then cell A1 changes to =A3/MAX(A3:A6). I don't want this to change. I still want to formula in A! to be =A2/MAX(A2:A5). I've tried using the "$" absolute character and I've tried using the absolute reference in the R1C1 reference style both to no avail.
I have the following table:
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF4=
ABCDEFG1*******2**Lockbox*Total****3Monday2-Apr-0735**Lockbox*TotalDesired*Result4Tuesday3-Apr-0756*Wednesday781235Wednesday4-Apr-0778****6Thursday5-Apr-0796****7Friday6-Apr-0743****8Saturday7-Apr-07456****9Sunday8-Apr-0745****10Monday9-Apr-07678****11Tuesday10-Apr-07653****12Wednesday11-Apr-07123****13Thursday12-Apr-07345****14Friday13-Apr-0745****15Saturday14-Apr-07567****16Sunday15-Apr-07578****17Monday16-Apr-0778****18Tuesday17-Apr-0796****19Wednesday18-Apr-0745****20Thursday19-Apr-0745****21Friday20-Apr-07578****22Saturday21-Apr-07321****23Sunday22-Apr-07231****24*******Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I setup an index match formula to find a match between a column and row reference. the formula because what I want is the value to the right of the second instance of Wednesday in the rows not the first instance.
I need to create a formula that will reference row 3 in whatever column it's in.
If I copy the formula down the whole column I need it to always reference the third cell from the top. I've got a value in that row that I need all the formulas to use.