Find Cell Reference Containing Specific Value From Current Position Up
Jan 29, 2009
I'm having some difficulties in defining my formula. I'm pretty sure that this should be possible.
I have a table containing values and dates. For each change in dates, I should summarize every value for that date. I cannot use the autosummarize function, because I do not want the sum to be beneath the values, rather in a column to the right of the values.
I have created a formula which checks for a change in date: =IF(C15=C16;0;1) where the C column contains the dates. Basically I say that the Index column should contain a 0 if the date is the same as previously registered, 1 if it is a new date.
The index column is used in some conditional formatting rules, so I would like to keep it anyway.
View 7 Replies
ADVERTISEMENT
Dec 1, 2012
trying to find the value of column A (date field) if it exists on the row that the cursor is presently on. I'm trying to check for the value before performing the next function to make sure the user is on a valid row. Cursor could be on any column A to F. Columns are always 6 but the rows can vary.
View 7 Replies
View Related
Dec 15, 2009
I need the cell address where the cursor is (in a non active worksheet).
View 5 Replies
View Related
Nov 11, 2008
I require a macro to enable a selected shape to be moved from current cell location to relative position but 1 row up. eg topleft address = A4 and shift shape to topleft address = A3
View 5 Replies
View Related
Jun 23, 2009
HTML Imagine the following table (Ax, etc is the cell position):
A1=John C1=Name D1=Date E1=Version F1=IP
A2=10/2/2008 C2=A1 D2=A2 .... ....
A3=Client version 7.01 C3=A1+5pos D3=A2+5pos
A4=172.24.3.5 C4=A1+10pos D4=A2+10pos
A6=Michael
A7=10/2/2009
A8=Client version 7.03
A9=172.24.3.80
A11=Susan
A12=2/2/2007
A13=Client version 7.02
A14=172.24.3.200
I have a table of data on the left side and I want to re-organize just like the right side. Let's take C2 as an example, the value for that cell = A1;
Now, C3 in the other hand, the value for that cell = A1 + 5 positions down;
C4 = A1 + 10 positions down;. The same type of formula applies for the remaining columns on the right. This seems like an easy solution, but it's not easy when you don't know it... :
View 4 Replies
View Related
Jan 29, 2014
I need to make a cell display the contents of the cell immediately below it, regardless of if there are rows inserted at the referenced row or above or below it on the worksheet. ALSO I need to do this at several additional cell locations down the worksheet. Such as : A1 displays A2, A4 displays A5, A7 displays A8 etc.
Example: I want A1 to display whatever is in the cell immediately below it. In this case A2. I need to be able to insert several rows at row 2 and have whatever new value is now in the A2 position displayed in A1.
After the rows are inserted I need the cell that was in position A4 to continue to display the contents of the cell below it.
I tried using the formula in A1 of: =INDIRECT("A2") and it works good except when I insert the rows my similar formulas below the area where the rows were inserted continue to refer to the specific original cell and not the one positioned now below it.
View 3 Replies
View Related
Mar 9, 2014
How to find and show position number? I try merged two function, but doesn't work
1º=FIND("0";B2)
2º=FIND(CHAR(1);SUBSTITUTE(B2;"0";CHAR(1);2))
Number
Position
[Code].....
View 5 Replies
View Related
Nov 2, 2008
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies
View Related
Jul 11, 2014
I have a data set, in which Sheet 1 have a matrix of high level showing Engineer, Program and commodity relationship.
I have to create separate sheet for each program on sheet 1, each program sheet should have Engineer name and commodity name from sheet 1.
Multiple commodities and multiple engineers should be separated by definite structure.
find worksheet with input and output (manual) as expected.
View 2 Replies
View Related
Jan 9, 2013
I have in the first column something like this:
GLOBAL DESCRIPTION
GLOBAL DESCRIPTION1 Particular description1
GLOBAL DESCRIPTION1 Particular description2
GLOBAL DESCRIPTION2
GLOBAL DESCRIPTION2 Particular description1
GLOBAL DESCRIPTION2 Particular description2
I want to to have in the second column:
GLOBAL DESCRIPTION1
Particular description1
Particular description2
GLOBAL DESCRIPTION2
Particular description1
Particular description2
So far I have this: +IF(EXACT(A1;UPPERCASE(A1));A1;+RIGHT(A1;LEN(A1)-(FIND(X;A1;1)-1)))
X standing for the position of the first lowercase, which I don't know how to get.
View 9 Replies
View Related
Jun 22, 2009
The user has multiple Excel documents available [which all contain this macro, as they were generated from the same template by a third-party software (LabView)].
The user is already working on a Word document, typing text until he decides that he wants to add some information from one of the Excel sheets. To do this, he changes to Excel, clicks on the button running the script, and the required information is pasted into the Word document at the present cursor position.
View 2 Replies
View Related
Jul 17, 2013
I'm making a dashboard and currently using a camera tool to show a sheet in a different workbook.
However the camera shot should show the sheet for the current month. (the workbook contains 12 sheets one for each month)
I was trying to reference a cell within the dashboard workbook in the formula bar to select the correct month.
[Code] .....
This is the workbook being referenced and
[Code] ....
This is what I have to try select the sheet with the right month. W2 contains whatever month it currently is.
I get that this formula is wrong because I'm referencing a sheet/cell in the dashboard workbook right after calling the tracking workbook, I just don't know how to write it correctly.
View 3 Replies
View Related
Oct 25, 2012
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
View 7 Replies
View Related
Mar 6, 2007
formula that can automatically use the current month date to extract information from other cells on my spreadsheet.
For example: This formula should be located in cell C6. Cells D6, F6, H6, J6, L6, N6, P6, R6, T6, V6, X6, and Z6 (these cells correspond to the months of the year, January to December respectively) contain the values I need. The month names are labeled above in row five.
Let's say the current month is March, I need the formula in C6 to automatically know that it is the month of March and to pull the information from cell H6 (which is the March cell). Then when April comes along, it will know that it is April and to only pull the information from cell J6; and so on until the end of the year.
View 3 Replies
View Related
Jan 17, 2013
I'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.
Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)
Useful information are included !!!
I'll give an example of a record...
Column: BZ, Row: 543 says --> "2110000000-6989000000, 1TOK_TER:17-11-010(25 DAYS LESS),
KATERINA 25 (MANTAS KALNNNNN_HYPERTENSION)1000-150, W:95_105, , HR THE 16wks_US NEFRON OK,
NT OK_B EPIP OK(GOLF BALL)_KAMPILI ORIAKI(DIAITA)_DOPPLER OK, O+,TEST OK(TOX_), , , , , , "
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range)
For Each Cell In Rng
Temp = Temp & Cell.Value & ", "
Next Cell
Temp = Mid(Temp, 1, Len(Temp) - 2)
MyMerge = Temp
End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469.
Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
View 9 Replies
View Related
May 23, 2014
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
View 5 Replies
View Related
Mar 11, 2008
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
View 3 Replies
View Related
Feb 22, 2012
I have a spread sheet that lists a bunch of dates and expected volume that will be associated with the date. I need to build a macro that will look at the first date expand it out for several months then look at the volume and break that out over a week's time.
That part is simple enough but I need to turn this into a looping statement and I cannot figure out a way to get my macro to always come back to the next date in my list.
Ideally I would like something that is a variable that references the cell I want so I can do something like this.
Code:
MYRANGE = range("B2")
Do
range(MYRANGE).select
[Code]....
This should work for me perfectly if I can just figure out how to make the MYDATE varaible reference a sepecific cell rather than a value or text in the cell.
View 2 Replies
View Related
Jan 7, 2009
Is it possible to position a predetermined cell (e.g. A42) in the top left corner of the screen. (Not every screen users use has the same size)
View 3 Replies
View Related
Oct 6, 2009
Part of my code adds a Worksheet to the selected Workbook and then re-orders them alphabetically, but one of the Worksheets (Called home) should always remain at position 1. Is there a way to dictate exactly which postion it should be in so that I can place it there after the sort is complete?
View 7 Replies
View Related
Jun 25, 2014
I have this formula counting down days until my next fire drill:
[Code].....
However... Every time the drill is done I need to change the date in the formula for the countdown. That I can have it reference a cell instead?
My initial idea was a formula like this:
[Code] .....
(however this code doesn't actually work ...).
View 5 Replies
View Related
Jan 13, 2009
Not been around for some time now but have to do my annual update for this workbook and implement some new changes.
In the attached example workbook, I have created some formulas which reference a particular cell for each client e.g.
View 2 Replies
View Related
May 16, 2009
This is probably really easy but I don't know what I'm doing wrong.
View 2 Replies
View Related
Dec 7, 2013
I'm getting an N/A error on my MATCH formula.
I'm trying to match a cell reference, rather than a specific text or value.
Here is the syntax I used. MATCH(Cell,Table Array Name, 0)
I have made sure that the text matches exactly and the cell formats are the same.
View 1 Replies
View Related
Mar 7, 2014
I have one Popup Menus in Userform, But i want to to Open Popup menu in Specific Position in userform, In Fixed Position,i want to specific a position which opens Popup Menus in Userform.
Look In Example in Attach.
[Code]....
menu_1.xls
View 2 Replies
View Related
Aug 6, 2008
I have a very large file of data, over 500,000 rows, opening in one sheet in Excel is not an option with my current version. In each row I need to change the characters in positions 41-44 from whatever they current are, to '9999'. I'm sure there has to be a way I can do this using vba, does anyone have a sample snippet of code, or another post they can point me too?
View 9 Replies
View Related
May 20, 2008
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
View 9 Replies
View Related
Aug 5, 2013
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies
View Related
Feb 17, 2009
A simple question:
I have a column of numbers, for example:
2
5
5
8
8
8
20
50
I would like to know the value that corresponds to (for ex.) 5th position from, of course, the beginning of the column, ie 8.
View 2 Replies
View Related
Jul 18, 2006
What I have is a list of numbers, many of which are duplicated, in no particular order and I really want to avoid sorting. What I want to find is the lowest position in the list of a particular value. Unfortunaly MATCH only seems to return the first occurance of the value. Not really looking for a VBA solution.
View 8 Replies
View Related
