I found the error a little further down the line, actually a few errors conspired together. Sorry to waste time, Moderators please delete this if possible. I have no idea how to improve on the thread title.
Windows("Race Strengths.xls").Activate
Sheets(TLocation).Activate
TRRowCount = Range("J1"). CurrentRegion.Rows.Count
Stop
TheRace = Class & NewTrackClass & MeetDay & AgeRest & HorseRest
Set look = Range(Cells(2, "J"), Cells(TRRowCount, "J")). Find(TheRace)
If Not look Is Nothing Then
h = look.Row
RaceRating = Cells(h, "I").Value
when I run the whole code without the STOP comand the corresponding ratings are wrong, when I run it and STop it and then continue with F8 the code produces the right results. Everything else is the SAME the only thing I change is I make the Stop a comment of not to enabel it or disabel it.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer 'Dim thiswb As Workbook
officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls"
In A2 I have the number 112233 I want to know if this number is found in the other workbook in the entire workbook to search it in all the worksheets . if it is found then true if not falls
I have a short vb code to delete a list box value, but i now need to add a few lines to also delete the list box value IF it exists in cell J59 on a worksheet.
Open the workbook called get_status.xls then run the user form. Enter 123456 into the textbox then click the Get Status button. I want to get info about the item from the workbook called object_status.xls which is on a network drive (known location) and is not open. Do I have to open this workbook to look for data in it?
So I have to find the matching text string, then get the value of the adjacent cell. If the text string is found in cell B5, then return the value from C5. Always look in the B column for the matching string. After the info is found, close object_status.xls and write the value to the label in the user form (lblResults) in the get_status.xls workbook. If 123456 does not exist in the object_status.xls workbook, then return "Unknown" to the user form.
I have to open another work book to get a certain cell with a value.
ex. in my source file (prod plan) i have columns A,B,C,D. in column B it contains Line1 up to Line10. In column C it contains Model and Column D it contains Quantity.
Prod Plan workbook
Sample: A-----B-----C------D --------------------- AAA--Line1--M1----87 BBB--Line2--L2-----45 CCC--Line3--X1----0 up to Line 10
I need to find all Lines (column b) as my reference to get the column D records using Excel Macro and paste or copy to another worksheet. Is this possible to use the IF to get the data from Column D or Looping. How to make this in Excel Macro.
I need a Macro that will find every instance of 0 within a workbook and then replace that value with an average of the values in the two cells above it and the two cells below it?
It's been a while since I've visited MrExcel, but I've been busy learning C# & ASP.Net & Visual Studio & SQL Server - work doesn't want too much from me :p
Anyway, I'm writing a procedure that plays around with lists in Excel (i.e. the type of list that would show up in CurrentRegion. They're not connected to any outside data source, or as a pivot table - just columns of data that will have a header row in a different format than the data body.
Is there any way of cycling through each sheet in the workbook and identifying each occurrence of a list?
I've been playing with the code at the bottom of the post, and it finds the boundaries of each list providing (at the moment) that each list starts on row 1. There are other problems with it however.
And to identify the values in the header row? .....
What I'm looking for is to copy information from certain cells, G9 G11 G13 G16 G19 G21 in book1 into A B C D F and K into book2, like so G9 = A G11 = B G13 = C G16 = D G19 = F G21 = K
I tried running the macro and copying and pasting it in but what i need it to do is to find the next empty row down and enter new data rather than copy over the old. The second, although really before copying is I'd like to the data in G11 to search collumn B and find if there are any existing entries containing that data and, if so, maybe pop up a window that says "Entry alreadyexists" or even loop it round and enter it in G11 saying the same thing and doesn't copy anything, but if the data doesn't exist in G11 then data in all cells on book1 is copiesd as aforementioned
I have a workbook with multiple sheets (one total and one for each pay period, 27 in all) to track time and attendance. From the main worksheet where my totals are, I want to be able to enter a date and then jump to the worksheet that date is found on.
For example, if I want to enter time for June 25, 2008, instead of searching for the right worksheet to find that date, I would like some way to type 6/25/2008 (US date) and enter, and that entry will take me to the worksheet that 6/25/2008 is found on so that I may then key my data. My dates are formatted in US style with the first date hard typed and the rest are =Date +1.
I have a document (unfortunately I cannot attach it) in Excel 365 that each time I open it I get the usual prompt that it is calling an external link. As much as i'd love to hide the popup I need to find the link to solve to problem but I'm at a loss.
Simply breaking the links doesn't work for some reason, so I've tried updating the source to reflect the current file. No luck there.
I've searched the workbook for the name of the link in question, searching for all formula for name itself as well as variants of "[" and ".xlms".
I don't see anything in the name manager referencing that external file.
I don't recall if I copied from that particular document, I may have as it was a duplicate file. I tried looking over the cells I believe I copied from it but didn't see the reference.
I've installed Kutools and Bill Manville (MS MVP) FindLink Tool. Both of which says there is no external link.
I've looked at the compatibility checker which basically just says, yes there is an external link but give no insight on how to address.
I've tried a couple of macros, some of which crashed excel, some of which simply said that there was an external link but not how to find it. In my frustration I forgot which one that was but I'm about to try that approach again and look for that code.
I'm in a workbook, and I want to look up a name. CTRLF or clicking on the binoculars both bring up the expected dialog box, but when I populate "Find What" and either hit enter, click Find All or Find Next, nothing happens.
The only thing I can think of is that I created a macro to function in one sheet only, then saved this workbook as .xlsm. But that doesn't seem right.
The table to the right is actually in another workbook, both workbooks will be linked. What I'm trying to achieve is a vlookup formula that will count the items in the left table that have numbers entered into them. (This table will be located within a different workbook).
I want is when a user enters a time into a specific cell I want Excel to find that time in another sheet (which is in the same workbook) and give out the details of the cell which is next to it, see attached image file.
I am trying to simplify process for the users of a workbook. This workbook has about 20 tabs and I would like the users to manually paste a value in C1 of sheet1 and have a macro button that will find that value in the whole workbook.
Sometimes I will copy a macro to a different workbook and then modify it to do what I want instead of writing it new.
If it has a reference to a different macro, I have to go through each module in the "VBA Project" to fine it and see what it does.
I was wondering is there a way to fine a sub routine in a project without scrolling through each module to fine it? (without going back to the workbook and clicking on the view macro button)
Also is there a way to alphabetize each sub routine in a module so it can be found easier
I've started to group my subs better so I can find them easier, but there are a lot of old ones.
I am creating a macro that will open another workbook and take all the contents off a page in it and paste the contents to itself.
The problem is that sometimes those workbooks will only have one page and it will have the data I need, but sometimes there will be two or three pages in the workbook, but again, with only one sheet that has data on it. How can I have the macro find the one page with data on it?
Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.
I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet
But I couldn't get it to work.
Here's where I am:
For iteration = 1 To numFiles 'blah blah blah get filenames 'filename of new workbook = outputFileName 'worksheet name in new workbook = Cumulative Record Data 'filename of data workbook = dataFileName 'worksheet name in data workbook = Record
The error code I get is Run-time error '1004' - Application defined or object-defined error on line
I am trying to have a worksheet linked to another workbook, but this workbook name will change. It will always start with Blockbuster - Valuation but the rest of the file name is the date and the version of the workbook. Do you know how VBA can go in a folder and look for the entire file name of a workbook starting with Blockbuster - Valuation.
The following code is supposed to open a workbook, find txtVinput.value and put todays date (now()) in column C.
it doesn't generate any errors, but it doesn't add the date either. I'd post the file, but its just over the limit and I don't want to get into trouble (50K)
The whole prog is a userform that the operator enters a receipt number and it posts to another workbook, with the date. The operator also has the option to insert a date when the paperwork is returned. This is the part that is causing me trouble.
Sub InsertReturnInDatabase() Application. ScreenUpdating = False Application.EnableEvents = False
I'm currently writing a macro to check for changes between versions of a spreadsheet. I'm having a problem looping through the sheets and selecting equivalent (named the same)sheets in both sheets. My attempt at code (stripped down a little) is here.
Option Explicit Sub Difference_Checker() Dim Check As Boolean Dim Row As Integer Dim Column As Integer Dim ColRef As String Dim MaxLength As Integer Dim MaxWidth As Integer Dim i As Integer Dim j As Long Dim Shtname As String Dim StartTime As Variant MaxLength = 100 MaxWidth = 256 'Set Application Settings Application. ScreenUpdating = False Application.EnableEvents = False Application.Calculation = xlCalculationManual....................
I want create a macro which will find a text "9:55:00" in the cell of column A and if found copy that entire row in a new workbook which i have opened. the text "9:55:00" will be there every workbook i will open. Once the row is copied in the new workbook, when i again do the second find the row must be copied below the first find in the new workbook.
I have several Workbooks, say BookA, BookB, BookC (or more). Let BookB and BookC be linked to BookA. I donīt know the actual names of the Workbooks though as the user may change those any time. Let BookA have several Worksheets, one named SheetA1. Let BookC have several Worksheets, one named SheetC1. Now when a specific cell in SheetA1 changes, I want to set the value for a specific cell in SheetC1 (using Worksheet_Change for SheetA1). How can I get at the actual name of that cell in SheetC1? I did imagine to loop through all the Worksheets in all linked Workbooks till I find one named SheetC1, but somehow I canīt manage the right syntax for that.
I now understand that there's a way to remove the activate statements, while still selecting that document to work with, and therefore greatly increasing the speed.
