Open the workbook called get_status.xls then run the user form. Enter 123456 into the textbox then click the Get Status button. I want to get info about the item from the workbook called object_status.xls which is on a network drive (known location) and is not open. Do I have to open this workbook to look for data in it?
So I have to find the matching text string, then get the value of the adjacent cell. If the text string is found in cell B5, then return the value from C5. Always look in the B column for the matching string. After the info is found, close object_status.xls and write the value to the label in the user form (lblResults) in the get_status.xls workbook. If 123456 does not exist in the object_status.xls workbook, then return "Unknown" to the user form.
The table to the right is actually in another workbook, both workbooks will be linked. What I'm trying to achieve is a vlookup formula that will count the items in the left table that have numbers entered into them. (This table will be located within a different workbook).
I have a "data" workbook with various data in columns. Need to create "master" workbook that generates 3 different reports. Need "master" to contain macros that searches "data" and generates report based on search.
I am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer 'Dim thiswb As Workbook
officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls"
In A2 I have the number 112233 I want to know if this number is found in the other workbook in the entire workbook to search it in all the worksheets . if it is found then true if not falls
I found the error a little further down the line, actually a few errors conspired together. Sorry to waste time, Moderators please delete this if possible. I have no idea how to improve on the thread title.
Windows("Race Strengths.xls").Activate Sheets(TLocation).Activate TRRowCount = Range("J1"). CurrentRegion.Rows.Count Stop TheRace = Class & NewTrackClass & MeetDay & AgeRest & HorseRest Set look = Range(Cells(2, "J"), Cells(TRRowCount, "J")). Find(TheRace) If Not look Is Nothing Then h = look.Row RaceRating = Cells(h, "I").Value
when I run the whole code without the STOP comand the corresponding ratings are wrong, when I run it and STop it and then continue with F8 the code produces the right results. Everything else is the SAME the only thing I change is I make the Stop a comment of not to enabel it or disabel it.
All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click() With Range("Q9") .Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27" .Value = .Value End With
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook Application.ScreenUpdating = False ' turn off the screen updating Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
what VBA is required to have a combo box in a userform look up data in a different workbook, then populate that data into the drop down list of that combo box for a user to select.
I have managed to successfully create a vlookup for a combo box in a userform that looks up data in a named range in another worksheet within the same workbook and then populate that data into a field in a worksheet within the same workbook. However, I want to change this so the combo box on a userform (in one workbook) will look up data from a named range in a second workbook without opening the second workbook. At the moment, the code I have that will 'submit' the user selected data from the combo box drop down list works.
The code that has worked so far to vlookup data for the combo box from a worksheet within the same workbook is:
Code: Private Sub UserForm_Initialize() Dim pName As Range Dim ws As WorksheetSet ws = Worksheets("vlookupsheet") For Each pName In ws.Range("ProjectName") With Me.cboProjectName .AddItem pName.Value End WithNext pName Me.cboProjectName.SetFocus End Sub
Do I need specify the file path of the second workbook that will contain the data for the combo box as well as the name of the worksheet and named range in that second workbook?
On one workbook I have "column A" that lists serial #'s, one serial number per cell. What I need is to be able to take all the non blank data from that column and copy it to another workbook with all those serial #'s in 1 cell numerically sorted and separated by commas.
I would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
I have created a workbook that imports data from another workbook which is used frequently on a network drive. After I import the data to my new workbook, it locks the original workbook for editing. Is there a property that will allow me to disable this 'locked for editing' read only mode or any other way to get around this?
I have a short vb code to delete a list box value, but i now need to add a few lines to also delete the list box value IF it exists in cell J59 on a worksheet.
I have to open another work book to get a certain cell with a value.
ex. in my source file (prod plan) i have columns A,B,C,D. in column B it contains Line1 up to Line10. In column C it contains Model and Column D it contains Quantity.
Prod Plan workbook
Sample: A-----B-----C------D --------------------- AAA--Line1--M1----87 BBB--Line2--L2-----45 CCC--Line3--X1----0 up to Line 10
I need to find all Lines (column b) as my reference to get the column D records using Excel Macro and paste or copy to another worksheet. Is this possible to use the IF to get the data from Column D or Looping. How to make this in Excel Macro.
I need a Macro that will find every instance of 0 within a workbook and then replace that value with an average of the values in the two cells above it and the two cells below it?
It's been a while since I've visited MrExcel, but I've been busy learning C# & ASP.Net & Visual Studio & SQL Server - work doesn't want too much from me :p
Anyway, I'm writing a procedure that plays around with lists in Excel (i.e. the type of list that would show up in CurrentRegion. They're not connected to any outside data source, or as a pivot table - just columns of data that will have a header row in a different format than the data body.
Is there any way of cycling through each sheet in the workbook and identifying each occurrence of a list?
I've been playing with the code at the bottom of the post, and it finds the boundaries of each list providing (at the moment) that each list starts on row 1. There are other problems with it however.
And to identify the values in the header row? .....
What I'm looking for is to copy information from certain cells, G9 G11 G13 G16 G19 G21 in book1 into A B C D F and K into book2, like so G9 = A G11 = B G13 = C G16 = D G19 = F G21 = K
I tried running the macro and copying and pasting it in but what i need it to do is to find the next empty row down and enter new data rather than copy over the old. The second, although really before copying is I'd like to the data in G11 to search collumn B and find if there are any existing entries containing that data and, if so, maybe pop up a window that says "Entry alreadyexists" or even loop it round and enter it in G11 saying the same thing and doesn't copy anything, but if the data doesn't exist in G11 then data in all cells on book1 is copiesd as aforementioned
I have a workbook with multiple sheets (one total and one for each pay period, 27 in all) to track time and attendance. From the main worksheet where my totals are, I want to be able to enter a date and then jump to the worksheet that date is found on.
For example, if I want to enter time for June 25, 2008, instead of searching for the right worksheet to find that date, I would like some way to type 6/25/2008 (US date) and enter, and that entry will take me to the worksheet that 6/25/2008 is found on so that I may then key my data. My dates are formatted in US style with the first date hard typed and the rest are =Date +1.
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
So I basically have a template workbook that the code is stored in. I need it to pull an entire row if Column C in workbook "rawdata" contains specific text, in this case "PRCH - Purchase".I have never had to do anything like this before, it has always been working in the same workbook. It's failing at the 'mp = ...' line every time. There might be other errors in the code too, I just cannot resolve the first one!
