Find Values On One Tab And Replace Data From Adjacent Cell
Apr 3, 2014
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
View 2 Replies
ADVERTISEMENT
Mar 18, 2009
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies
View Related
Feb 4, 2014
Is there a formula that can find a keyword within a cell then replace it with a formula that will add the adjacent cell value up.
A1=103 B1=104
A2=104 B2=105
A3=105 B3=Out-1p-(1)
A4=110 B4=111
A5=111 B5=112
A6=112 B6=113
A7=113 B7=114
A8=114 B8=Out-3p-(23)
I am looking for a formula that can automatically calc (B3) to 106 (based upon cell A3) if the cell has a value of (*out*).
View 1 Replies
View Related
Aug 10, 2012
I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2()
'
'Range("A1").Select 'Start from the home cell
Dim ValueFound As Object
Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS")
If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If
NotFound:
End Sub
View 3 Replies
View Related
Feb 15, 2008
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False
Dim i As Integer, iCount As Integer
Dim numberOfPMDs As Integer
Dim PMD_Name As Integer
Dim worksheetName As String
Dim worksheets_in_file As Integer
worksheets_in_file = Worksheets.Count
worksheetName = Worksheets(2).Name
numberOfPMDs = worksheets_in_file - 1
View 5 Replies
View Related
May 22, 2007
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
View 9 Replies
View Related
Apr 27, 2009
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
View 9 Replies
View Related
Feb 5, 2009
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
View 6 Replies
View Related
May 15, 2009
Until now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
View 3 Replies
View Related
Jun 8, 2009
I've got a piece of code I'm stuck on. Basically, I have a range of data and most cells are empty. However, I want to replace all the nonblank cells with an X. I can't quite figure out how to have the code replace something non-specific...
View 3 Replies
View Related
Jul 27, 2013
Is there a way to find specific values and change their colors all at once in xls?
For example, if it looked like:
1 4 5 3 7
4 2 6 3 1
5 9 2 6 4
And if I tell it to change every 4 to red, it'd be like:
1 4 5 3 7
4 2 6 3 1
5 9 2 6 4
Or changing the cells' color would be ok, too.
View 1 Replies
View Related
May 8, 2008
I would like to be able to replace all cell values in a range of 20c by 20r (i.e. 400 cells). In all cases the condition would be the same (find all cells with a value greater than than zero), but then replace with different values.
e.g. Cells with value >0 in range CX119:DQ138 replace with "NT", then cells with value of >0 in range DR119:EK138 replace with "NU"
I thought you could do it with find and replace by just selecting that range of cells but can't see how to set the conditional >0 bit.
View 9 Replies
View Related
Aug 16, 2006
I am copying fomulas from one row to the next. Then I am using the Find and Replace tool to replace some key text. This technique has worked 65 times. Now when I try to Replace All a box comes up asking me to Update Values for the text im replacing. Why is this happening?
View 4 Replies
View Related
Feb 24, 2007
I’ve created a form, from which I want to search and replace information into several sheets. Ex: When I select the button ‘find record’ after entering a name, I want it to search through consecutive sheets to find the name and populate all information associated with that name into the form. From there, I would like to be able to edit that particular record’s information in my form and then select another button on my form ‘update record’ to have the information automatically replaced back into wherever it finds that record’s name in the sheets.
View 9 Replies
View Related
Aug 21, 2007
I have a simple problem I am trying to find a set a values on a column and what to replace once found with the first 5 most left characters. Example:
in column A I can have text and numbers; the numbers that I want to find are in the following format xy:zw / xy:zw on each case the values can be from 0 to 9 so this is tons of posible combinations, I been trying to use **:** ? **:** but I don't get none. This is what I am doing
Set target = Sheets("Sheet1"). Range("A1:A9000")
For Each cell In target
If cell.Value = "**:** ? **:**" Then cell.Value = "00.00"
Next cell
A example would be 02:47 / 03:15 the next row could have 03:15 / 04:09
and so on however I could have text in some rows. In reality I would like to find and replace the cell.value with the Left 5 characters if the cell contains ANY value maching that format. Text in that column will never have that format combination
View 4 Replies
View Related
Jan 30, 2014
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies
View Related
Mar 13, 2014
So I have a list of organizations in Column A, with multiple names (anywhere from 0 to 50 names) for each org. in Column B.
Org
Names
Company A
Brown, Jones, Smith, West
[Code]...
I want to do a find and replace for all of Column B, where all the names are replaced with their respective color values. If possible, I'd like this to all happen with the individual cells (so for example, B3 might go from "Brown, Jones, Smith" to "Red, Red, Blue").
If that's not possible, I could divide all the names into individual cells and then find and replace.
View 3 Replies
View Related
Jul 15, 2009
Is there a way to find and replace the values from a closed workbooks of a folder.
say i have some 15 files in a folder c:/test
I want to find all "Ltd" and replaceAll with Limited
and find all "Co" and replaceAll with "Company" etc (some 20 different values to be found and to be replaced) if this is in a single file i can easily record a macro to this job, i am stuck for doing 15 files at one shot.
View 9 Replies
View Related
Jul 13, 2014
I have Excel 2013. I would like to use the code below but I need it to let me select the range instead of specifying it in the code, then pop up a form into which I can fill in what I want it to search and what I need it replaced with.
[Code] ......
View 3 Replies
View Related
May 27, 2014
I have an excel workbook with 60 sheets (each contain data in the same categories and in the same column locations, just different information on each sheet). What would the VBA code look like if I wanted to manually enter the find and replace values and perform the function (find and replace) across multiple sheets in the workbook?
View 5 Replies
View Related
May 22, 2014
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
View 4 Replies
View Related
Oct 21, 2008
I am trying to calculate an adjacent cell to place an interger value after a find result. The following example, lets say location=$L$5, I need to calculate Cells(13,5).Value =n. Its for a page number and the cell I need is always to the right of the found cell.
View 2 Replies
View Related
Jun 5, 2014
I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".
I have attached the work book of what I am trying to accomplish.
View 14 Replies
View Related
Oct 27, 2009
Here's an example of what i'm working with,...
Range is C40:D48
View 4 Replies
View Related
Jun 1, 2014
I need to find and match patterns of strings in a column and fetch data from the adjacent column. I've attached a sample workbook with my sample data.
How can I find the appropriate matching pattern and fetch and fill data from the adjacent column from my source table to destination? I tried the string functions available and used SEARCH function to match the pattern and check whether it is available. However, when the pattern is found, how can I fetch the adjacent column ?
My attempt to code a formula using SUBSTITUTE, MID and SEARCH functions. Below is the monster formula I wrote - it works and returns 1 when the pattern is found.
Formula:
I need to return the matching pattern that is found. And with it the corresponding adjacent cell's value.
Attached File : Find_Pattern_Match_and_Fetch.xlsx
View 14 Replies
View Related
Jan 27, 2010
I am having a problem using data from my combobox to find the cell on the worksheet and write to the adjacent cell.
Worksheet name is Fleet
ComboBox Name is ComboBox7
TextBox name is TextBox3
CommandButton1
I would like to be able to take the text from ComboBox7, find this text in Col A of worksheet Fleet and write the Value of TextBox3 in the adjacent cell in Col B. when
the CommandButton1 is pressed.
View 2 Replies
View Related
Jun 14, 2007
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
View 4 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Jun 10, 2008
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
View 8 Replies
View Related
Jul 12, 2014
How to find and replace a range of values. I've looked online, and searched the forum with no success.
I have a list of cells in a column labled "Check #1", "Check #2", "Check #3" ect. I'm trying to build a Macro that would replace any value from "Check #1" to "Check #50,000" with "Outgoing Check". I know this can be done manually with relative ease, but it will need to be done very very very often, so I'd like to automatic it as much as possible.
How to put the steps into a Macro or Formula that could be re-produced with ease.
View 6 Replies
View Related
