Is there a formula that can find a keyword within a cell then replace it with a formula that will add the adjacent cell value up.
A1=103 B1=104
A2=104 B2=105
A3=105 B3=Out-1p-(1)
A4=110 B4=111
A5=111 B5=112
A6=112 B6=113
A7=113 B7=114
A8=114 B8=Out-3p-(23)
I am looking for a formula that can automatically calc (B3) to 106 (based upon cell A3) if the cell has a value of (*out*).
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies View RelatedI have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2()
'
'Range("A1").Select 'Start from the home cell
Dim ValueFound As Object
Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS")
If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If
NotFound:
End Sub
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False
Dim i As Integer, iCount As Integer
Dim numberOfPMDs As Integer
Dim PMD_Name As Integer
Dim worksheetName As String
Dim worksheets_in_file As Integer
worksheets_in_file = Worksheets.Count
worksheetName = Worksheets(2).Name
numberOfPMDs = worksheets_in_file - 1
I have a formula in cell J2:
='H:Folder[CI10001G.xlsm]Sheet'!$C$5
I need a macro that will change the part of the formula that is "CI10001G" to the value of cell A2 which would basically be something along the lines of "CI10004D" so the formula would change to the following:
='H:Folder[CI10004D.xlsm]Sheet'!$C$5
And then this formula will then successfully look in the newly directly file path.
I really would like to alter about 1000 lines of formulas. Here's a sample of the code.
Code:
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U7,AD289*$AE$37))
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U8,AD290*$AE$37))
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U9,AD291*$AE$37))
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U10,AD292*$AE$37))
[Code] ....
*****The last line of code is below*****
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U966,AD1248*$AE$37))
What I'm really trying to do is replace all the numbers (well, max of 3) after the U part to U6.
So,, for example ,, if in the code it shows MIN(U16,,,,,,,, I want it to show MIN(U6
So as an example
Code:
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U966,AD1248*$AE$37))
WILL NOW BE
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U6,AD1248*$AE$37))
So U6 is in all the formulas.
I've tried searching on google,, saw a video here on UTube;
Excel Magic Trick 519: SUBSTITUTE & REPLACE Functions
[URL] ........
Showed some great stuff,, but I just didn't quite get it for the above.
I would like to know if it is possible to complete a "Find and Replace" but replace with a formula as opposed to a value?
View 9 Replies View RelatedI have text in column 1 and need a formula that will replace it with text in column 2, as shown in (fig 2).
FIG 112X Jan 2009 7.5000 put X Jan 2010 5.0000 callAA Jan 2010 17.5000 call AA Jan 2009 9.0000 putIBM Jan 2010 130.0000 call IBM Jan 2009 17.5000 put PLCE Jan 2009 30.0000 call PLCE Feb 2010 7.5000 put
FIG 212X Jan 2009 7.5000 put X Jan 09 7.50 putX Jan 2010 5.0000 callX Jan 10 5 callAA Jan 2010 17.5000 call AA Jan 10 17.50 call AA Jan 2009 9.0000 putAA Jan 09 9 putIBM Jan 2010 130.0000 call IBM Jan 10 130 call IBM Jan 2009 17.5000 put IBM Jan 09 17.50 putPLCE Jan 2009 30.0000 call PLCE Jan 09 30 call PLCE Feb 2010 7.5000 putPLCE Feb 10 7.50 put
I need to replace A1*FX! with A1/FX! within thousands of formulas (and many variants of A1)
Unfortunately whenever I attempt this is deletes the A1 (or whatever cell is being referenced)
How to stop find replace doing this?
How do you replace a string in a Formula within a cell or several cells?
For example:
=SUM(Sales[Monthly])
find and replace Monthly with Quarterly
I basically want to find and replace certain characters in a formula, but the formula is quite intricate so I will give some background to the problem first:
I have a complex spread sheet which is used to check if a data array matches another data array (both data arrays are different sizes). One array has a set of parameters for a variable and the other array has the variables and the actual values for each variable. I have a section with the following formulas to check if the actual value (C121&D121) matches the parameters ($A$9:$A$108, $B$9:$B$108) & ($C$9:$C$108, $D$9:$D$108)
I have the following formula in cell AB121:
=(C121=INDEX($B$9:$B$108,ROW(101:101)-INT(ROW(100:100)/$D$1)*$D$1))
In cell AC121:
=(D121=INDEX($D$9:$D$108,ROW(101:101)-INT(ROW(100:100)/$D$1)*$D$1))
And have similar formulas from AD121 to AY121. I mention this to point out that excel regards this as an inconsistent formula, I haven't copied and pasted it over, I have had to re-enter it in each cell adjusting the parameter sections.
The problem I have is that currently this is set up to check through a data set and wrap around every 100 rows ('100' Entered in $D$1) but I want to adjust the formula when there is a different amount of rows to check. So basically the only way I can think to be able to do this is to have a formula or something in VBA (which I have very low level experience with) to be able to go into the formula and change certain characters within the formula. For example, if I wanted to check 95 rows instead of 100, it would need to have 95 in $D$1, which I enter in manually, but then how to go in and replace (101:101)-INT(ROW(100:100) with (96:96)-INT(ROW(95:95) in 2 sections in the 1 formula then do the same with the inconsistent formula from AC121:AY121?
I'm receiving this message when I attempt to use the Find, Replace function. Formula is too long". I have a column of cells containing text only. ( about 2-3 paragraphs worth) I'm trying to replace a name with another name, which works fine where the cell contains a single or few sentences, but fails to replace when the cell contains too much information.
View 8 Replies View RelatedI am trying to calculate an adjacent cell to place an interger value after a find result. The following example, lets say location=$L$5, I need to calculate Cells(13,5).Value =n. Its for a page number and the cell I need is always to the right of the found cell.
View 2 Replies View RelatedUntil now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
View 3 Replies View RelatedI am having a problem using data from my combobox to find the cell on the worksheet and write to the adjacent cell.
Worksheet name is Fleet
ComboBox Name is ComboBox7
TextBox name is TextBox3
CommandButton1
I would like to be able to take the text from ComboBox7, find this text in Col A of worksheet Fleet and write the Value of TextBox3 in the adjacent cell in Col B. when
the CommandButton1 is pressed.
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedI have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
ABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
ABCDEG
F HIJK
I would like to find a text string in a document, move the information in the cell to the right of this to another cell (say A1).
View 8 Replies View RelatedI have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.
View 3 Replies View RelatedI am trying to complete these steps:
Take a value from AK59 from the "EQF" tab in a file called "QuoteMaster.xls"
Use that value to find match in column "A" in a Seperate workbook "ITMSTR.xls" on the "Sheet1" tab
Offset to the right 1 cell of the found value, take back to the "QuoteMaster.xls" and put in cell "AN59"
My code comes up with no errors, it opens the file and closes is as shown, but it doesn't copy the value over for whatever reason...
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
I have a file that I import into excel and append to the end of the last free position, However my totals are slightly out when compared to the main system.
I have found the reason why, they randomly slips in a Credit or credits.
So I have the scenario column P has a txt field and the majority of the time it has SI (Invoice) however when they issue a credit the txt becomes SC.
The annoying bit is that Column L has a value but it is not a negative number i.e. 75 where it should be -75
I can do an iF then and find the SC or SC's and I can place some text in Column L but I would like to be able to take the value in L and make it a negative number.
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I use an old accounting program to download sales history into excel. For sales where there is only one line item and therefore 1 row, there is no problem. Sales with multiple items show a summary of the sale in the first row and the line item details in rows after.
On multiple item sales (shaded in yellow), the total postage is shown in the summary row (shaded in orange). The postage fields in the line items are blank (shown shaded in blue). I need to split the total postage by number if line items and put the value in the line items. i.e. if the total postage is $10 for two items, I need to show $5 for each line item.
The summary row identifies the number of line items in the "Qty" column ( cells in green). This cell could be used to divide into the postage (in orange) and also count how many rows below to put the answer in
As part of a macro i do a find and replace on a range cells that replaces "/1" with nothing (""). Therefore 2/1 becomes 2, what i don't want though is if the de-nominator includes a 1 but not only 1 to keep the whole of the de-nominator, say 8/11 does not want to become 8/1.
View 4 Replies View RelatedI need help with a formula (no VBA) that will find all the semi-colons ";" and pound signs "#" in a cell and replace them with this "<br> - ".
Example of Cell A1: ;#Red;#Green;#Blue;#
I started with this:
=REPLACE(MultChoice,SEARCH(";#",MultChoice),1,"<br> - ")
but it only replaces the first character.
Is there a way to define the end of a cell in a find/replace? I.e. I want to find characters like this:
;;[space character][end of cell]
and replace with
[end of cell]
(that is just delete the ;;[space character] bit when it is followed by end of cell)
