Until now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
View 3 RepliesI have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
Each sheet contains 30,000 rows of data in column A, C, E, G and I.
I want to find each cell of column A, C, E, G and I to another sheets column A, C, E, G and I respectively.
If match found then it should return "True" in column B, D, F, H and J.
I have tried VLookup, but it takes too much of time for calculation (1,50,000 vlookup Formulas needs to calculate in each sheet with If condition) some time calculation gives wrong results.
As well as I want to do filtering on this all the data... so that time calculation gives the problems (I have used application.Calculation=xlCalculationManual)
So now I am using Range.Find method, but that loop excecutes for 30,000 times and each ittration contains 5 Find methods.
My .find function is only finding the 2nd value in a cell example If i look up the term " HOSE"
5/8 hose water Will return
5/8 heater hose will not
Basically what I am making is something I am calling a "what" button. It queries my database and returns all the part numbers with the term i put in and i thought it was working fine till i was testing it, did i do something to select this? I've tried xlpart and xl whole. Neither is working.
Here is the code below
Sub COPYPARTNUMBERINFO()Dim parttofind As String
Dim partcell As Range
Dim partref As Range
ActiveSheet.Unprotect Password:="*******"
Range("t6:T10000:u6:U10000").Select
Selection.ClearContents
parttofind = InputBox("What is the number or discription")
[code].....
I am trying to calculate an adjacent cell to place an interger value after a find result. The following example, lets say location=$L$5, I need to calculate Cells(13,5).Value =n. Its for a page number and the cell I need is always to the right of the found cell.
View 2 Replies View RelatedIf Not stfound Is Nothing Then 'if value is found then do this
is causing me a run time error 424 when I try and run my code "Object required". Entire code is pasted below...
Option Explicit ....
I need to find and match patterns of strings in a column and fetch data from the adjacent column. I've attached a sample workbook with my sample data.
How can I find the appropriate matching pattern and fetch and fill data from the adjacent column from my source table to destination? I tried the string functions available and used SEARCH function to match the pattern and check whether it is available. However, when the pattern is found, how can I fetch the adjacent column ?
My attempt to code a formula using SUBSTITUTE, MID and SEARCH functions. Below is the monster formula I wrote - it works and returns 1 when the pattern is found.
Formula:
I need to return the matching pattern that is found. And with it the corresponding adjacent cell's value.
Attached File : Find_Pattern_Match_and_Fetch.xlsx
Is there a formula that can find a keyword within a cell then replace it with a formula that will add the adjacent cell value up.
A1=103 B1=104
A2=104 B2=105
A3=105 B3=Out-1p-(1)
A4=110 B4=111
A5=111 B5=112
A6=112 B6=113
A7=113 B7=114
A8=114 B8=Out-3p-(23)
I am looking for a formula that can automatically calc (B3) to 106 (based upon cell A3) if the cell has a value of (*out*).
I am having a problem using data from my combobox to find the cell on the worksheet and write to the adjacent cell.
Worksheet name is Fleet
ComboBox Name is ComboBox7
TextBox name is TextBox3
CommandButton1
I would like to be able to take the text from ComboBox7, find this text in Col A of worksheet Fleet and write the Value of TextBox3 in the adjacent cell in Col B. when
the CommandButton1 is pressed.
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedI have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2()
'
'Range("A1").Select 'Start from the home cell
Dim ValueFound As Object
Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS")
If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If
NotFound:
End Sub
ABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
ABCDEG
F HIJK
I would like to find a text string in a document, move the information in the cell to the right of this to another cell (say A1).
View 8 Replies View RelatedI have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.
View 3 Replies View RelatedI am trying to complete these steps:
Take a value from AK59 from the "EQF" tab in a file called "QuoteMaster.xls"
Use that value to find match in column "A" in a Seperate workbook "ITMSTR.xls" on the "Sheet1" tab
Offset to the right 1 cell of the found value, take back to the "QuoteMaster.xls" and put in cell "AN59"
My code comes up with no errors, it opens the file and closes is as shown, but it doesn't copy the value over for whatever reason...
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies View RelatedI'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.
Sub count_4()
Dim r As Range
Set r = Range("A1:A6")
With Application.FindFormat.Font
.Bold = True
.Italic = True
.Size = 16
End With
r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate
End Sub
I wondering if it is possible for a macro to recognise whether or not there is text in an adjacent cell, and if there is, then to copy data from another adjacent cell.
For example, because there is data in C2, data from A2 has been inputted into B2. And any blank cells are left alone.
a
b
c
d
e
ref1
(cell A2 data here)
DATA
DATA
DATA
ref1
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
I am using Excel 2010.
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.
I am trying to analyse a whole heap of data generated by an image analysis package. The data is exported out in to excel, I then need to be able ot rearange it a bit and export it out to another program.
I have attached a smaller version of the data as an example. The example data set only contains 3 image planes with ~100 entries for each. A full data set contains 96 planes and ~2000 entries each.
So what i want to do.
I want to setup a workbook i can dump this data into and have it spread everything out over 96 different sheets (1 for each plane).
I can get it to do it for the first lot of data using a IF command like =IF('Object Data'!B:B=1,'Object Data'!D3,)
But that only really works for the first plane, as the starting cell for plane 2 is always going to be different.
So what i need is a formula that will say: look at the plane column, if it equals a certain value print out the value for the other cells in that row.
Is that possible?
I know there must be some way to write vba to force users of an excel sheet to choose from a drop-down list for that particular cell. I am having trouble with a spreadsheet that is used widely through the company with people doing copy/paste or just typing in entries.
View 2 Replies View RelatedI'm revamping a key inventory for my company and would like to be able to track the history of each key (name of person who it was issued to, date issued, date returned). I figure the best way to do this for the 90 keys I currently have in circulation is to create drop down lists for each key that has been used by more than one person in its history and upon selecting a given person from the drop down list of keys used more than once, the adjacent cells would populate with the corresponding data of date issued and date returned. Some keys have not been used more than once so not every key will have a drop down. Here is what my key inventory spreadsheet looks right now.
View 3 Replies View Relatedwriting a Macro which will move data from a cell to an adjacent cell.
E.g Column B has only data in certain cells, I would like the Macro to work down the column and every time it encounters data in Column B to move it into the adjacent cell into Column A.