Find First Empty Cell In Range And Copy Data
Jan 28, 2007
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
View 3 Replies
ADVERTISEMENT
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Jan 25, 2010
I want excel to copy some data fram 5 defined colums into the first empty row in a list. The problem is decribed better in the attached dummybook.
View 2 Replies
View Related
Mar 20, 2005
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies
View Related
Jun 2, 2014
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
View 7 Replies
View Related
Nov 27, 2007
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
View 9 Replies
View Related
May 8, 2014
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
View 5 Replies
View Related
Jul 18, 2012
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
View 9 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Sep 5, 2013
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
View 9 Replies
View Related
Mar 20, 2013
What would the VBA code be to find the last row of data and have it copy range A2:E(last row)?
View 2 Replies
View Related
Jan 8, 2008
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
View 9 Replies
View Related
Apr 27, 2009
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
View 10 Replies
View Related
Feb 13, 2007
I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View 3 Replies
View Related
May 19, 2009
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
View 2 Replies
View Related
Mar 4, 2013
In the attached table I found the Last Column and Row which non empty cells in a range.
But I need to find the first column and row which non empty(filled) in the range .
View 4 Replies
View Related
Sep 26, 2013
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
View 7 Replies
View Related
Oct 24, 2012
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
View 1 Replies
View Related
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
View 9 Replies
View Related
Feb 10, 2009
I am looking for a macro to do the below
copy range b2:b8 from sheet 2
find the first empty cell on sheet 1 row 2
paste values into there
View 9 Replies
View Related
Feb 21, 2014
Find statement returns empty when i search in a range with XLWhole option enabled
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Range(Cells(1, 1), Cells(5000, 100)).Find(Tar(1, 1), LookAt:=xlWhole)
[Code]..
but when i use Cells instead of Range ,Find command returns perfect result
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Cells.Find(Tar(1, 1), LookAt:=xlWhole)
If f.Column = 11 Then Sheets("Sheet1").Cells(Tar.Row, Tar.Column + 1).Value _
= Sheets("Sheet2").Cells(f.Row, f.Column + 1).Value
End Sub
View 1 Replies
View Related
Jul 14, 2008
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
View 11 Replies
View Related
Oct 13, 2008
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
View 9 Replies
View Related
Oct 14, 2008
Suppose you are in a worksheet in A1. How can i place my cursor on the first not empty cell?
View 9 Replies
View Related
May 24, 2006
delete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
View 9 Replies
View Related
Dec 14, 2006
I have the following code that works beautifully, unless the selection area has only one row of data.
lastrow = Range("A11").End(xlDown).Row
Range("A11:A" & lastrow).Select
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
View 2 Replies
View Related
Jan 18, 2007
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
View 8 Replies
View Related
Jan 29, 2007
1. copy data to 'check' sheet from web
2. new data to be appended to the existing data ( not to overwrite on the existing one.
3. sorted within selection
4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt()
If Len(Range("a1")) > 0 Then
Range("a1").End(xlDown).Offset(1, 0).PasteSpecial
Else
Range("a1").PasteSpecial
End If
ActiveSheet.Paste
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Selection.End(xlDown)).Offset(1, 0).Select
End Sub
problems are
1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
View 9 Replies
View Related
Mar 20, 2007
first time posting. Need some help. I have a workbook with two sheets - (say sheet A and sheet B) that I need to copy a range from and paste (concatonated) into a new workbook. The thing is I want to copy the "non-empty" cells in columns d and e of each sheet - another words - I dont want to specify a specific cell range because users will be periodically adding new rows. Then I want to paste the "combined" from both sheets into a new sheet in a new workbook.
View 9 Replies
View Related
