How can i find the last matched row of a given text
So say i wanted to search Jim and i had in range a1:a10 - would need to retrieve 4 as the last Jim found is in ROW 4
Jim
Harry
Jim
Jim
Harry
H
H
H
H
Harry
In the four rows of text below I'm trying to match each gas stick to its corresponding gasline.
I think I can count over to "GAS STICK" and get the number. <15> From that point I can count over to "," (comma) and get that number. <26> So the gas stick will be between the first number and one less than the second number. <GAS STICK 1>
I need completing this code to place a the line or stick number in a cell B of the same row. Column A would have the description and column B of the same row would either be "1" or "11" respectively. Column C would be the shortened description (GAS STICK 1).
1] "HUNGA, DUNGA, GAS STICK 1, THINGY"
2] "DOHICKY, GAS STICK 11, THINGUS"
3] "SCAPPEN, DAPPER, GASLINE 1"
4] "SUCH, AND, SUCH, GASLINE 11"
[Code] .....
Attached File : ExactMatch1.xlsx
Here is what I have:
Column J is the date opened. Column T is the date closed. Of course,
column T will have no date if still open.
Column K and O may or may not have text.
Column AF6 has a date, mm/dd/yyyy, that is entered/changed depending on the search.
What I need is a formula in AF8 that will look at the date entered in AF6 and find a match in columns J and T. Then it will look to see if there is text in K and O. If so, populate AF8 with that text.
I have an existing Cash Flow Report that has a column of abbreviated/shortened (WBS Element) title where each cell contains a unique three lettered/numbered amount of characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Element) title (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBS Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru. B11, just to the left of its abbreviated/shortened (WBS Element) title.
I have an existing Cash Flow Report for my work that has a column of abbreviated/shortened (WBS Element) titles where each cell contains unique three lettered/numbered characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Elements) titles (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBA Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11, just to the left of its abbreviated/shortened (WBS Element) title.
Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx
BIRD
FISH
DOG
BAT
BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS
FISH
TAILS
BAT
BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
how to checking data in 2 column each row, if partial/altogether string is match, shown "ok" otherwise show "check" with data in column a as parameter..
View 3 Replies View RelatedI'm working on a formula to make it enable a part of the text then return the best possible match. Below is my formula
=MATCH("*"&$A11&"*",'[Customer Master List - 05.30.xlsx]Export Worksheet'!$B$82:$B$1298,0)
However, it works with some text but won't work for some.
For example, I have this text CARE-A-LOT, INC and in the master sheet there is a similar text like this CARE-A-LOT. I want it to return CARE-A-LOT as this the best match possible.
I'm currently trying to get a Index Match function that finds a cell with given text in it, then returns a value that corresponds to a cell with that same text plus the word 'Sum'. I cannot use the offset function because the Sum cell appears at the end of an expense breakdown, and each category has different numbers of expense items.
Is there an easy way to do this?
with Match function not matching text in this formula?
Using the below formula cell $L$11 (it contains "abc") will not match the respective cell contents in array E:E even though "abc" is in a cell within column E.
=IFERROR(INDEX('Paste In Data File'!G:G,MATCH($L$11,IF('Paste In Data File'!C:C=B14,'Paste In Data File'!E:E),0)),"")
The cells within column E are populated using a formula such as =IF(MID(A6,3,1)="a",MID(A6,435,9),"")
Column A is the data source and contains a text string.
After much trial and error, it seems the cause preventing the match is; $L$11 contains typed in text "abc" and the above formula for column E is pulling in 9 characters, not just 3.
It seems that if I can modify the entry for the array E:E to just look at the left 3 characters only, it may work.Problem is I do not know how to modify E:E accordingly.
I am using this formula:
=IF($A27="","",IF((OR(+J27>P$10,+J27
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
What formula can I use to search a range of cell values for a specific text string? My method is searching formulas instead, which is not what I want.
Background: I am developing a little test script for a project and I want to include some automatic validations to help make the job of the testers easier.
What I have set up so far:
1. Testers input numbers into specific fields M8 through M20.
2. Fields N8 through N20 automatically check fields M8 through M20 and compare those with what is contained in a range of hidden cells I set up in advance. A formula ensures that it reports "correct" or "incorrect" on a field-by-field basis, based on the comparison.
3. Cell O8 searches for the text string "incorrect" in cells N8 through N20. If that text string appears in any one of the cell values (not formulas), then O8 directs the tester to test again. If the text string "incorrect" does not appear, then cell O8 reports that the test was successful, and the tester can proceed to the next test (exact same setup repeats).
My only problem is in the formula used for the last step. I have tried a few different formulas I know in cell 08, but none are giving me the results I'm looking for. The closest I have come is a successful search and validation based on the string being in the formula instead of in the value of the given cell.
I am trying to find a formula that will automatically fill in text that is entered in Sheet1 if it matches with a name in Sheet 2. I have found a formula that will enter a number but it will not work for text.
=SUMPRODUCT(Sheet 1!$C$3:$C$31,--(Sheet 2!$B$3:$B$31=$A15))
I would like the job on sheet 2 column B to fill in from what is listed next to their name on Sheet 1 column C, if the name of the person is entered on Sheet 2.
Sheet 1
NameJob1MaryFile2JohnLog3SallyIntake4PeterPack
Sheet 2
Staff Name &JobMary0John0Sally0Peter0
I want the macro to:
1. search A1:AZ1 to find the cell that has the text "VBA Test" in the cell. There could be other text in the cell as well - this is not an exact match - but these two words are the common text.
2. go to that cell
3. go to one cell below that
4. enter a formula (I've got it from here ....)
formula to find specific text from statement.
I manage to use formula find for 1 text in 1 statement, but in confuse how to get another text found if i have "8 text" to find. Generally, there will only be "1 text" for each statement.
Maybe in 1 statement there have only "IC" or "Staff Tagging" or Name" or "Product" or etc till 8.
In cell A1, I have three possible text strings: (1) "change/s: changed the color green to red", (2) "change/s: changed the color from green to red, changed the size from big to small", or (3) "changed the color from red to green".
I need a formula that will look at a text string, and if there is a comma in the string, it finds the word "change/s" and substitutes it with "changes", if it finds no comma, it substitutes the word "change/s" to "change", and if the word "change/s" is not in the text string at all, it leaves that text string unchanged.
I'm trying to find the correct formula to sum text that meets two criteria. If C2:C1023 is Equal to TEXT from J8 and F2:F1023 is equal to TEXT J4 add up the total times J4 shows up in C2:1023
=SUMPRODUCT(Sheet3!C2:C1023=J8,Sheet3!F2:F1023=J4,Sheet3!C2:C1023)
Is there any formula to find text and return its cell address? This is like when we use Ctrl+F function to find a text, and Excel then highlight the cell contains the referred text. At the same time, the name-bar displays the address of the cell. Now, is there any formula that can perform such task like this?
View 9 Replies View RelatedI need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
I'm using the below VBA
Dim c, DataRow
With Data
Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues)
If Not c Is Nothing Then
DataRow = c.Row
End If
End With
Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :
Favourite Hotel - London
Favourite Hotel - Cardiff
Favourite Hotel
Favourite Hotel - Birmingham
Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).
How do i make it search for an exact match?
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
I am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View Relatedrefer to the attached workbook for reference. I am looking for a function in Sheet1, Column E that will search for the value of Sheet1, Column A within Sheet2, Column A. When a match is found, the function should look across Sheet2, Columns B - V for values of 1. When such values are found, the function should return the associated value from Sheet2, Row 2. There may be multiple values of 1, and as such, the function should separate values with a comma.
View 3 Replies View RelatedTable 1:
I like to go to Berlin.
You like to move to Amsterdam.
They want to see Chicago.
When will the reach San Francisco.
Table 2:
Amsterdam
Chicago
San Francisco
Berlin
What I want to do:
I want my function to see if the text in Table 1 contains a value in Table 2, and if yes, output that value.
Desired Result:
Row A1:
I like to go to Berlin.
Row A2:
Berlin
Row B1:
You like to move to Amsterdam.
Row B2:
Amsterdam
I'm trying to do a column of individual discount calculations using a discount percentage found in a cell two to the right of a cell containing the text "Total SP:" that is always upwards and to the left of the cell where the formula goes (but could be two rows or could be 20). There are multiple "Total SP:" cells in the sheet - I always want the first one upwards. I have created the following but I get #NAME? where I hope to see the discounted value.
VB:
Dim Discount1 As Double
Discount = Cells.Find(What:="Total SP:", After:=ActiveCell, LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=True).Offset(0, 2)
Range("R9:R" & LastRow).Formula = "=IF(J9>0,$E9*(1-Discount1),0)"
I've just thought, the Cells.Find needs to be redone for each cell where the formula is inserted to ensure it always catches the correct discount and this isn't going to do that - it's going to find it once and always use that single value.
I think this needs a Loop or something and to move the ActiveCell down one after the formula to get it to redo the Cells.Find.
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View Related
