I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
I need to find and match patterns of strings in a column and fetch data from the adjacent column. I've attached a sample workbook with my sample data.
How can I find the appropriate matching pattern and fetch and fill data from the adjacent column from my source table to destination? I tried the string functions available and used SEARCH function to match the pattern and check whether it is available. However, when the pattern is found, how can I fetch the adjacent column ?
My attempt to code a formula using SUBSTITUTE, MID and SEARCH functions. Below is the monster formula I wrote - it works and returns 1 when the pattern is found.
Formula:
I need to return the matching pattern that is found. And with it the corresponding adjacent cell's value.
Attached File : Find_Pattern_Match_and_Fetch.xlsx
I have a datatable which has a column containing up to 25 different text codes (which are currency pairs). I need to insert a specific number (as seen in the attached example) in a second column. This number depends on the text in the first column. I suspect this is very simple but at the moment, not for me!
View 3 Replies View RelatedHow to match 2 columns in excel and retreive data from the 3rd column ?I have an example here as to what I want to do..
ColA ColB ColC ColD
niki delhi neha
vinay mumbaihardik
kapil bangalorevinay
neha patna
pooja goa
hardik kerala
Here is what I want to do for the above.
ColA and ColB contains a standard information which is supossed to be my reference. ColC contains my queries for which I need information about their place in ColD.
So I need to match ColC with ColA, so as to retrieve the matched data (between ColC and ColA) from ColB to ColD. Following is the way I expect my result to be..
ColA ColB ColC ColD
niki delhi neha patna
vinay mumbaihardik kerala
kapil bangalorevinay mumbai
neha patna
pooja goa
hardik kerala
I received an answer in that link
"=INDEX($B$2:$B$6,MATCH($C2,$A$2:$A$6,0))",
Which when tried, surely worked a few months back. I am now using excel 2010. I tried the same again, but this time it does not work for me. Is there something else to do which has been changed in the new excel 2010 ?
I need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:
A1 - Apple
A2 - Banana
A3 - Apple
A4 - Banana
B1 - 3
B2 - 2
B3 - 1
B4 - 1
I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
i want to extract a value from a column into another column in excel.
this first column contains text and i want to extract a value that in located between the characters 'FOR' and 'MTHS'.
how do i do that?
the situation is the same for all the rows; the value that i want is just located between these characters.
is there a simpler way other than using the MID functn? because everytime i use it i need to count the no. of characters and its quite difficult to keep up with the numbers.
I have a table, lets say from C4:J15. Basically all the column headers are dates(row 4). I want to input a formula into column D(D5:D15) that basically retrieves the column header of the first instance in which that row has data in a cell. So say Row8 has the word 'Medicare' in C8, and there is a dollar amount in cell H8, in cell D8 I would like to retrieve the column header of 2/3/2013 that is in cell H4(the header). If there is a dollar amount in the row, that means there is a variance, and I'd like to know the first date in which there is a variance so I don't have to search the whole row.
View 2 Replies View RelatedI have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies View RelatedI have a category field, and a money spent field in a table.
Category Money spent
1 $12
2 $19
2 $122
1 $5
4 $65
5 $34
5 $12
3 $26
Category 1: $17
Category 2: $$$
and so on..
So I'm looking for a formula that returns information to one cell. A formula that looks if in 'this' column you see the category code '1' for example, then return to me the money spent for ALL the 1's. It should return $17...
The table above is small just for demo purpose, my table has 8 category codes at the moment and the number of rows can be between 15 and 50 I guess... it's a monthly break down.
I would like to see how much is spent in total for each category...
In addition if possible, can this be done for two separate tables... We are two people, and I have two table recording expenditure.
So the formula would need to, from these tables:
Person A Person B
Category Money spent Category Money spent
1 $12 2 $14
2 $192 4 $25
2 $122 4 $65
1 $5 1 $32
4 $65 3 $75
5 $34 3 $85
5 $12 2 $12
3 $26 2 $11
Category 1: $49
Category 2: $$$
and so on...
Look up in both tables, search the two category columns for category '1' for example, then return all the $'s added together... So for Category 1 now it would show $49...
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedI have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
The first two columns are an example of my data set; I would like a formula for the 3rd column (Length+1) which will give me the length at the next age (i.e the value in the cell below in most cases) unless the following age is 1 in which case I want it to return zero.
Age Length Length+1
1 22 51
2 51 78
3 78 94
4 94 0
1 31 46
2 46 69
3 69 85
4 85 96
5 96 103
6 103 0
1 19 36
2 36 52
3 52 0
I want to count the number of times partial text strings occur in a cell adjacent to another cell containing specific text.
A B
FB Milton v Town PHOTO
BS Fairfax v South
BS North v Town
BS Milton v South PHOTO
FB North v Milton PHOTO
FB Milton v South
I'm looking for the number of times "FB" and "Milton" occur in Column A when "PHOTO" also appears in Column B in the same row. From numerous searches I've tried figuring out VLOOKUP, DCOUNTA, etc.
How to do this or if there's even a formula or even a macro i could run to run this data.
I have three rows of data (29-31) from columns D to Q.
I would like to take D29 and add each of the values in the adjacent columns exactly once and sum up the value D thru Q
For example I'd like to return not just Sum(D29:Q29) but also Sum(D29:R29)+Q30, Sum (D29:R29) +Q31.
I guess that might be considered a 1X3 matrix & and 8X3 matrix, but I'm not really sure how to set up the return values for these equations nor how to return them very quickly.
Creating a formula to match two columns (D & H) and if there's a match, I wnat it to produce the value that's in column E, in column J (where the fomula will go).
I have three columns of data laid out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # Shipment Reference Field
12345 1ZX123 xxOO12346
12346 1ZC345 KJH12347--45
12347 1Z7YYT 0000012345XXX
I'm trying to write a formula for column A that essentially looks at the field in column B, finds the instance of the data anywhere in the entirety of Column D, and when it locates it puts the corresponding field from Column C of that line in the results of column A. So the result above would turn out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # ShipmentReferenceField
1Z7YYT 12345 1ZX123 xxOO12346
1ZX123 12346 1ZC345 KJH12347--45
1ZC345 12347 1Z7YYT 0000012345XXX
I have the origins of a formula here...but I don't know how to put in the part where i'm retrieving the data from Column C of the same line as the target data.
=INDEX($D$1:$D$100, MATCH(B1,1*LEFT($D$1:$D$100,LEN(B1)),0))
One has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
View 1 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedFrequency
Formula to show the final/total a numeric values appears in an adjacent column.
I am currently attempting (I've researched many posts on this), to count /show the final totals a duplicate numeric value appears in one column, in an adjacent column (example below).
I am currently using an array Frequency formula below (courtesy of the board) filled down in column Q. this works well to count the frequency of duplicate numeric values appear on the list.
Formula used in Column Q below
{=IF(C2>=0.1,MAX(FREQUENCY(IF(C2:$C$1000=C2,ROW(C4:$C$1000)),IF(C2:$C$1000C4,ROW(C2:$C$1000),""))))}
However my aim is also to show the final entry of a numeric value in adjacent column R, by displaying text to indicate this. My example below shows “final” in column R
NB: My list is sorted by column C to ensure all numeric values are in ascending order.
Example
Column C Column QColumn R
12567 1 final
15789 1
15789 2
15789 3 final
23456 1
23456 2 final
12678 1 final
18965 1
18965 2 final
I'm trying to build an Index-Match formula to retrieve a number from a "data" sheet onto a "summary" sheet.
In example spreadsheet, I need to retrieve the stock price on a specific row from "data" sheet, and as an alternative, the most recent price.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
Im wondering if this can be done in excel..
2 columns
if the value in column O=$0.00 then I need to divide the adjacent cell in column L by 0.3 or multiply by 30%
this is the way I was trying to do this...
=IF((O2:O6722)=0,DIVIDE(L2:L6722).3)
I have tried it several different ways and cannot get it to work - is it my formula or can this even be done because I can't reference just one cell?
I had a problem finding something then deleting the column, I tried to alter the code from that thread to solve a new problem and I am close (I think), but not quite there. I need to find the column "Group" and merge it with the column "Sex" which is offset by 1 column. This code will go through and find the column "Group" and merge for the first cell, but will then get stuck in a loop just concatenating "Sex" to the end continuously. I need it to concatenate both columns entirely together. Any simple fix to what I modified? Previous thread should you be interested:Find Part Text On All Sheets & Delete The Column.
View 9 Replies View RelatedI have are two worksheets, "Sheet 1" which is a bill of lading form and "Sheet 2," in which columns A and B contain Part Numbers and Weights respectively.
What I'm wanting to have happen is when a user inputs a part number into Sheet 1 (say in cell B6), it calls a UDF that looks up the part number on sheet two column A and returns the corresponding weight from column B (to say cell C6 on sheet 1).