I have two columns
Date Cab No
1 4501
2 4501
3 4501
5 4501
1 3603
2 3603
5 3603
The cab no 4501 is absent on 4th & cab 3603 is absent on 3rd and 4th i have more than four thousand entries with 50 cabs how to find with count if or any other formula the missing dates of the cabs
I have a tracking template with a column listing dates, all i want to do is find all the missing dates from that column of dates.
Example:
Column A
1-May
2-May
4-May
5-May
7-May
8-May
10-May
11-May
12-May
14-May
15-May
I want to list the missing dates from this list.
i had a worksheet in which i had a column Named Cheque No. i want to print the missing cheque no's in a series of cheque no's.The logic here is that there will be different series of cheque nos for different transactions.Just check out my worksheet.
View 9 Replies View RelatedI am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
I having trouble with a find function see attached sample. If I do it manually it will find it, but if try in a record macro i received a variable not set error.
Sub Macro3()
Sheets("Data-Donnees").Select
Range("A1").Select
Cells.Find(What:="04/07/2008", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
End Sub
i have a workbook with missing dates and would like excel to insert any missing dates and add 0's into that missing dates if there is no data...
for example....
I'm working on more code to take data from hotel reports, compile totals and transfer data to several other workbooks. In prior instances, I'd been working with data that had been converted from Adobe .pdf format, so while the cell values appeared to be dates, they actually were text. I'd come up with a solution to find the first of each month in a column of dates and insert a row at that point. However, I'm now working on this with a system that actually outputs in Excel format. As such, the date column is actually normal date serial value, rather than text and my code doesn't work. What can I do to modify this snippet of code to find the first of each month and insert a row when the values in the column are actual date serials?
Here's the current code:
With Sheets("Sheet1")
For RowToInsert = .UsedRange.Rows.Count To 14 Step -1
If (Range("A" & RowToInsert) Like "*/01/*") Then Rows(RowToInsert).EntireRow.Insert
If (Range("A" & RowToInsert) Like TodayVisualMatrix) Then
Rows(RowToInsert).EntireRow.Insert
Range("A" & RowToInsert).Value = "Subtotal"
End If
Next RowToInsert
End With
Row 3 doesn't find anything because while they appear in that format, the value of the cell isn't */01/*....
I am looking for help. Sheet1 B1:1 has dates in each column in ascending order for one month. There are missing dates in between the days and they might look like this.
Example 1
7/1/20097/2/20097/6/20097/7/2009
Is there a code that will insert columns with the missing dates between the dates that already exist so that example 1 would become example 2?
Example 2
7/1/20097/2/20097/3/20097/4/20097/5/20097/6/20097/7/2009
how to leaved blank cells for missing dates in a series of sequential dates. For example, If my series is (in (m/d/y) format):
1/10/1999
1/12/1999
1/13/1999
1/14/1999
1/17/1999
1/18/1999
But I want it to be:
1/10/1999
(blank cell)
1/12/1999
1/13/1999
1/14/1999
(blank cell)
(blank cell)
1/17/1999
1/18/1999
How do I do this?
I have a sequence(or a series is more proper) of dates(without the hours) for. exapmple: 10/22/2007,1025/2007,10/25/2007. What I need is to insert rows with the missing dates. I found a VBE code for a macro which does the work but now the problem is that in some rows the dates are the same and if I have two times 10/25/2007 it adds the row with the next date after the first one and all messes up.
Range("A2").Select
Do Until ActiveCell.Value = Empty
If ActiveCell.Value = ActiveCell.Offset(-1, 0).Value + 1 Then
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.EntireRow.Insert
ActiveCell.Value = ActiveCell.Offset(-1, 0).Value + 1
ActiveCell.Offset(1, 0).Select
End If
Loop
i have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.
View 2 Replies View RelatedI have Stock market daily data for last 30 yrs. for my cycle analysis a macro which would insert date which is missing
View 2 Replies View RelatedI have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.
Here is my formula now:
=IF(VLOOKUP(J2&" "&L2,'East Data'!M:AU,2,FALSE),"*",0)
J2 is the customer name
L2 is the week
"East Data" is the spreadsheet with all of the promotions and customers.
I have tried many different ways of coming up with a solution of this problem without writing a VBA program, however, Excel's date and time formatting scheme seem to be tripping me up. As a result, I am trying to figure out what direction to go.
I have seached the board up and down looking for a solution and I have found one problem that is midly similar but I do not fully understand the code. I have tried to modify it but to no avail.
Here is my problem:
I have 9 columns of data that are reported in 15 minute intervals for a little over 3 years. There are missing data in the data set and it would be infeasable for me to manually find and replace the missing data. (Over 110000 rows of data)
Example of data (Where "/" delienates column seperation):
Date / Temp 2m / Temp 10 m / Radiation / RH / WindAve / WindMax / WindMin / Rain
6-1-06 12:15 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:30 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:45 am / 45 / 35 / .0001/ 95 / 5 / 7 / 3 / 0
6-2-06 6:00 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-2-06 6:15 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
So what I need to do is this:
1) Find which data times are missing
2) Add the appropriate amount of rows in between where the missing data would be
3) Add the correct dates to the new rows
4) Add "N/A" to the columns that have no data
You can see that my date and time are formatted in mm/dd/yy hh:mm
I found this on the website and was trying to modify it to my needs:
Sub InsRow()
Dim c
Say i have a range A1 to A10 that contains these numbers
101
102
103
104
356
106
225
107
108
109
I need some code that will help me find the next highest missing number in the value range of 101 - 199 in that range A1 to A10. In this case it would be 105
I have a file with approx 3600 rows. In Col B there is a 13 digit EAN-13 code. I would like to find out which numbers are missing. I have to compare each cell from top to bottom in the B-column to the cell below and find out if there are some missing numbers. If the numbers are incremental then goto next cell. But if there's a gap in the numbers then it should insert the missing numbers with an increment of 1.
I think the logic statement should look like this:
i = 1
For x = 1 to last row
If the gap between B(i) and B(i+1) < 1 then
Insert a row and put the missing value in the cell on the new row.
Endif
i = i+1
Next x
The comparison has to be made from the 5 digits in place 8-12 in the code.
Here's an example (i've dimmed the digits that shouldn't be compared):
7330985920714
7330985920721
7330985920738
7330985920776
As you see there's a missing number between the third and fourth row. Here the value should be 733098592074 + the checksum that is a bit tricky to calculate.
Between the fifth and sixth row there are four missing numbers that has to be filled in.
The checksum is OK to leave out at this moment. The important thing is to get the 5 digits.
How I can go about finding missing entries. I have an excel sheet that has column A as employee name and column E with a date. There are 10 employees so there should be 10 entries for each date. I need to be able to determine which employee hasnt entered information for a given date.
View 1 Replies View RelatedI get a ledger dump every month with 20,000 lines of all transactions. There are 1,200 ledger codes, ten departments, and thirty activities. Each of the 20,000 lines has columns with the ledger code, a department, an activity, and other data. There are tens of thousands of possible combinations of ledger code, department and activity.
I have most of the ones which are commonly used every month, and I use them to create a =sumif summary which totals all the same concatenations of ledger code&department&activity. However, every now and again a new permutation arrives and I need to find it and then create the new concatenation for the =sumif to use in the summary. Is there any way to do this by running a routine which will locate the new combination and create the concatenation in the =sumif summary?
i have two chart A and chart B from ,chart A got nine repeting numbers and Chart B will show what is the number not in chart A or is outside from this number 0.1.2.3.4.5.6.7.8.9. i want auto generate to chart B.
View 2 Replies View Relatedi need to find the missing numbers from 12 rows of 20 numbers.
ie, i have these numbers (only between 1-80) and need to find the *normally* 2 numbers that are not in that list between 1-80. there are 14 rows in this example
134810131417182832464855565758596475
412131417212223303235374044545861707880
57101117202528303435363940495155606264
35121823254148495051565860646670767879
311161719212225262829404447586063697578
126713162326353638394652535863707678
710172021272930414445464750515569727374
[code].....
these numbers wont be the same every time, but in theory after i enter 12 rows there should be only 5/6 numbers left max.
i need a script so that when i copy/paste 12 rows, i can be presented with the numbers not in that field. or even if i have a field of 1-80 displayed, then i copy paste my numbers in the fields below and can somehow highlight which numbers between 1-80 aren't in my pasted fields on the 1-80 field.
btw the numbers missing here are 24-68
ps im using excel starter 10 if that makes a difference
I have two list of names, mostly duplicates. List in column B has about 30 more names than the list in Column A and I need to identify which names are in column B that are not in column A. Names are in exact same format since they were pulled from the same data base.
View 1 Replies View RelatedIs there anyway to find missing numbers from column by excel formula?
Here is an example:
A
B
C
01 06 44
01 31 45
01 39 48
04 21 27
07 21 44
27 30 44
[Code] .....
Missing Numbers
32, 41, 49
02, 06, 11, 14, 17, 25,33, 34, 46, 47, 50, 51
04, 05, 13, 20, 29, 33, 40, 41, 49
I am trying to write a code enabling some calculations. As part of this code I want to find an integer in an excel range. I set the variable (integer) as Rvalue and wrote the following:
Selection.Find(Rvalue).Activate
which works fine as long as the find is successful. The issue I have however is when the variable cannot be found. I tried using the "iserror" function in vba but it appears that excel/vba does not recognise this issue as an error; I could use an excel formula (i.e. if(iserror(vlookup...) but I would prefer to find out how to handle the issue in vba.
i got worksheet which i store a list of all filing number in the same Col "R"
The combination of Filing Number Example
1) Invoice Filing Number = Inv2014070001 and continual
2) Purchase Order Filing Number = POD2014070001 and continual
3) Sublet Filing Number = SLT2014070001 and continual
Currently i am using a code which it can find the last filing number return to my userform textbox and increase the last number by 1. but this code can only return the very last filing number.
i need to find all the missing filing number in between all the filing number in Col R and return it to my userform listbox
VB:
If me.Remark.Value = "Sales" Then A = "Inv"
If me.Remark.Value = "Purchase" Then A = "POD"
If me.Remark.Value = "Sublet" Then A = "SLT"
Y = Me.TransYear.Value
myName = UCase(A & Y)
[Code]...
I have a list of products and would like to find what are the missing products which aren't ordered yet from the customer.
As the example: let's assume numbers from 1 to 9.
And I have some numbers, like this: 2, 4, 6, 7. What is the formula which can copy automatically the missing one into one cell?
See the attachment : howtodothis.xls
I know, how to copy multiple cell into one cell (like A4&", "&", "A5 etc), but how to find the missing numbers?
Here is my set up:
A2 to BF2 is a range of dates
A3 to BF3 are sales. Days without sales are 0.00
I want to pick a range of dates and find the number of days without sales between those dates. So, a formula that will look to a start date in A1 and an end date in B2, and then count the number of days that did not have sales between. Index/Match/Countif/Dateif I can't seem to make anything work.
I have a masive table of dates (the date is created via a if formula)
what i need is so wheni enter 2 dates in 2 cells the system checks all the dates between the two specified and then returns the contents of them to a small area on the page.
Dates To Test 14/08/2026 19/08/2026
Results
14/08/2026
15/08/2026
16/08/2026
17/08/2026
18/08/2026
19/08/2026
Table..............
i dont mind using script or anything like that, i dont have much knowlage of it but do have coniderable understanding of other langages and usually figure it out :D
What I am trying to do is sum values for each day of the month up to a designated date.
Example:
A1=any date of the month
A2-A31 = 6/1/2012-6/30/2012
B2-B31 = values that correspond to each date
how can i sum the values in column B from the beginning of the month to A1?
I have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
In column A, I have numbers from 1000 to 8600.
I want to identify (in a separate worksheet is fine) what numbers are missing inside the ranges 2500-2599, 3100-3399 & 3700-3799.
