Find Next Empty Row In Spreadsheet Using A Userform

May 24, 2006

I‘ve made a Userform which should transfer data form the userform to a spreadsheet (see Example). Because the spreadsheet contains a formula in column A the data must be place in column B and further. This part of the code is working. I also want the data to be placed at the first empty row. The following code works when no data or a formula is entered in column A. Because column A contains data up to row number 14 the data will be placed in the first empty row number 15.

Private Sub cmdAdd_Click()
Dim lRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")

' Find First empty row
lRow = ws. Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row

The code has to be changed so it will find the first empty row. If I use the userform in this example the data must be place in row number 6 in the columns B till L.

View 3 Replies


ADVERTISEMENT

Find Empty Cell In Column And Apply Required Character To Empty Visible Cells?

May 8, 2014

I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.

I am using code similar to the below:

[Code] .....

View 5 Replies View Related

Run Userform: Show A Userform In The Spreadsheet Environment

Jul 25, 2006

how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".

View 2 Replies View Related

Enter With UserForm To 1st Empty Row

Aug 16, 2008

I have an excel sheet with a couple of rows/columns of data in it (i've attached the sheet to my post (zipped in two parts)). Since I'm not familiar with VB. I want to simplify data entering procedure and I need a simple Userform for that purpose. That userform should enable me to enter data in the first row which has an empty cell in Column C. I have found a relatively decent userform on the internet and incorporated it into my sheet, but it's not working particularly well (it allows me to enter data only in one row, not in two or three). If I hadn't been clear enough, try to enter data in my sheet and you'll see what's the problem

Private Sub cmdAdd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("PartsData")
iRow = ws.Cells(Rows.Count, 3) _
.End(xlUp).Offset(1, 0).Row
If Trim(Me.txtPart.Value) = "" Then
Me.txtPart.SetFocus
MsgBox "Please enter a part number"
Exit Sub
End If
ws.Cells(iRow, 1).Value = Me.txtPart.Value
ws.Cells(iRow, 3).Value = Me.txtLoc.Value
ws.Cells(iRow, 4).Value = Me.txtdate.Value
ws.Cells(iRow, 5).Value = Me.txtQty.Value
Me.txtPart.Value = ""
Me.txtLoc.Value = ""
Me.txtdate.Value = ""
Me.txtQty.Value = ""
Me.txtPart.SetFocus

PS you'll notice that I have a Command button/Macro that inserts new rows in the middle of the already entered data. It perfectly suits my needs since it also copies the formula from the Column L to the new rows. That code needs no repairs.

View 5 Replies View Related

Userform Controls Empty When Add-in

May 9, 2007

i build a userform that includes 6 columns, and use named range to to be shown in the userform.

i use simple code to call this userform.
excuting the code, the userform appears ok.

i saved my file as an addin to be able to call my userform

the problem that the userform appears empty, no data and no columns, when calling the userform from the addin file whearas the userform works fine with the named range when calling from an xls file.

any idea how to solve the problem ?
pls find the attached file

File deleted as it of no help.

View 9 Replies View Related

Ignore Empty Cells In UserForm

May 3, 2013

In the attached I have a problem with my code,it involves empty / blank cells in my userform (control panel in sheet "overview"). How do I ignore these cells?

Udklip.jpg

Dropbox link: [URL] ....

Is it possible to make the userform list to not include blanks?

The code is:

VB:
Private Sub UserForm_Activate()

Dim objDic As Object
Dim var, var1, lng As Long
Set objDic = CreateObject("Scripting.Dictionary")
With Worksheets("ServiceDriftMaaling")

[Code] .....

View 3 Replies View Related

Userform With Empty List Boxes

Jul 21, 2014

I have a userform that loads with when excel starts. The workbook has a second and third sheets with names from A1 to A20. The form is used to add information to the first sheet. There are two list boxes on the form the reference via VBA the names on sheets 2 and 3. When form initially opens the list boxes are void of data. I also have a macro that reopens the form without having to close the workbook. When I close the form and reopen it the list boxes are populated as they should be - so the list boxes are working correctly just not being populated initially. In the open form module I have code that sets the rowsource for the data on sheet 2 and 3. Why the userform does not populate when the workbook initially opens?

Here is the code in my open userform module

Sub openuserofrm()

ActiveWorkbook.Sheets("VILLAGEvisits").Activate

Sheets("VILLAGEvisits").Unprotect Password:=""
Sheets("OldVisits").Unprotect Password:=""

[Code] ....

View 4 Replies View Related

How To Empty All Comboboxes And Textboxes In A Userform

May 3, 2009

I have a userform with many comboboxes and textboxes and I am using the following code to empty those controls:

View 9 Replies View Related

Remove Empty Cells From Combobox In Userform

Oct 1, 2003

it is possible to hide empty cells when using a ComboBox in a UserForm?

I have named the range from where I select my data and used the RowSource (ComboBox Properties window) to determine the selection. This works perfectly but I have many lines that are empty and I would like to know if they can be hide, or not selected, in the combobox.

View 4 Replies View Related

Input From Userform - Finding First Empty Row On Sheet

May 9, 2012

I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)

Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)

On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)

I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total

View 7 Replies View Related

Userform Enters Data At End Of Table Instead Of First Empty Row

Jun 9, 2014

No matter what I do the data entered into the UserForm always goes to the next row that isnt formatted as a table instead of into the the next empty row within the table.

I have tried:

Code:

With Sheet2.Range("B1").EntireColumn
NextRow = .Find(What:="*", _
After:=.Cells(1), _
LookIn:=xlFormulas, _
Lookat:=xlPart, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row + 1
End With

and

Code:

Private Sub CommandButton1_Click()
Dim LastRow As Long
Dim i As Integer, response As Integer
With Sheet1
LastRow = .Cells(.Rows.Count, "B").End(xlUp).Row + 1

[Code] .......

and

Code:
Dim LastRow as LongLastRow = Cells.Find("*",SearchOrder:=xlByRows,SearchDirection:=xlPrevious).Row

and

Code:

Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(xlUp)

View 1 Replies View Related

Transfer Data From Userform To Specific Location Not Next Empty Row

Mar 14, 2014

I have a User form with a combo box that is populated with numbers (1 thru 50) and four text boxes for first name, last name, email & cell number.

It all works fine. However: I would like it to transfer the data to (Sheet3) in numerical order... In other words, If the user picks number 5 his data would be entered in the fifth row.(or sixth counting header). Or if he chooses number 37, his info would be entered into row 37 (38 with header) of (Sheet3)

It currently populates the next empty row.

My code is below, How would I modify it to accomplish this?

Code:
Private Sub EnterButton_Click()

'Populates GetNumber Combo Box

Dim w As Worksheet, x As Long
Set w = Sheets("Sheet2")
x = w.Columns(19).Find(Me.GetNum.Value, lookat:=xlWhole, LookIn:=xlValues).Row
w.Range("S" & x).Delete

[Code] ............

View 2 Replies View Related

Userform Data Placed In Spreadsheet

Oct 14, 2009

At the moment i've got a userform with 6 text boxes and what I need is when the 'save' button is pressed, all the words from the text boxes is put in 'customers' sheet. I've found this but I just adds data to the top of the current sheet.

View 12 Replies View Related

Spreadsheet View In A Userform

Oct 22, 2007

i am trying to use this code to view the workbook (WK) in the userform named WK

it can not reconize .spreadWK

Private Sub UserForm_Initialize()
Me.SpreadWK.Cells.Range("A1:E10").Value = ThisWorkbook.Worksheets("WK").Range("A1:E10").Value
End Sub
however this is saying that it can not reconize
.spreadWK

View 9 Replies View Related

Copy From UserForm Into Spreadsheet

Jan 5, 2008

I just want to know how do you copy details from a userform (Im doing patient details such as Name, address etc) in the spreadsheet. I have got an OK button I think a VBA code needs to be used that will tell the from to copy the details in an empty row. My user form currently overwrites the original row and is annoying!

View 3 Replies View Related

Spreadsheet Read Only - Control With UserForm

Jun 13, 2013

I am working an a userform. I want people to add records to the spreadsheet thru the UserForm ONLY, meaning that if they go straight to the spreadsheet they wont be able to edit anything.

View 1 Replies View Related

Weather Forecast Spreadsheet Userform

Jun 25, 2014

I have added a user form to this spreadsheet to make it a little more user friendly to edit/add/delete some information. Now the API used only needs longitude/latitude (lat/lon) to be input by the user. In this case it would be good that for each lat/lon to have a custom name added by the user.

How to link the userform, that's already made, to the information in the spreadsheet?

I was thinking it would be convenient to have the "Site Name" added to a column in the sheet named "Site List" and then have the "Fore Cast Data" pull the names from there.

View 13 Replies View Related

Userform VLookup For Spreadsheet Reconciliation?

Mar 19, 2014

excel macro through userform for spreadsheet reconciliation.Can we have userform for doing spreadsheet reconciliation(Only by using VLOOKUP). Here are the things i need in userform

1)First box that will ask you Lookup Value (column range)

2)Second Box will ask you Tabel_array say (column range)

3)Third box will ask you Col_index_num (column range)

4)Fourth box will ask for range_lookup (0,1)

5)Fifth box will ask for the column where you need your result in excel

View 13 Replies View Related

Open Userform When You Close A Spreadsheet

Mar 5, 2007

I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.

When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).

View 9 Replies View Related

Write To Spreadsheet With Userform/Message Box On

May 25, 2009

I have a question related to Userform and/or Message box. In case a macro solve and displays the result as in Userform and Message box then is it possible to write (type) the values to the excel sheet without closing the Userform or Message box ?

View 2 Replies View Related

Lock / Unlock Spreadsheet Userform

Sep 13, 2012

I have the unlock/lock code below but i cannot get it to unlock the correct spreadsheet. Where do i need to place it in the code so that it will work properly.

Code to unlock:

Public Sub unlocksheet()
'unlock the worksheet
On Error Resume Next
ActiveSheet.Unprotect Password:="test"

Within this code:

Private Sub cmdSub_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("AFW")
'find first empty row in database

[Code] .........

View 1 Replies View Related

Updating Data On Spreadsheet From Userform

Nov 18, 2007

I have created a userform with textboxes. I want to update cells on a spreadsheet with the values in the textboxes. I have set the code into a command button to update the values, but they only get updated when I close the userform, not when I click the command button.

View 9 Replies View Related

Popluate Labels In Userform From Spreadsheet

Nov 15, 2006

I have a userform that allows the user to choose an order template from a combobox. I also have a ton of labels in the userform to return values based on the template chosen. then they can approve the template or choose another and the template chosen will be returned to the spreadsheet.

to see what they look like:
link to the userform (originally they were textboxes, but i changed to labels so the user cant change the values):
http://www.ppbcsingles.org/BRINKS/template-userform.jpg
link to the table:
http://www.ppbcsingles.org/BRINKS/template-values.jpg

to return the values to the labels based on the combobox... this is what i came up with, but it says that my sub or function isnt defined...and it highlights the error in "Private Sub ComboBox1_Change()"

Private Sub ComboBox1_Change()
Dim x As Integer
x = OrderTemplateSettings.ComboBox1.Text
Workbooks("newlocationsetup.xls").Worksheets("Templates ").Activate
'CURRENCY
OrderTemplateSettings.Label82.Value = HLookup(x, Range("A2:AE65").Value, 1, False) 'ones
OrderTemplateSettings.Label83.Value = HLookup(x, Range("A2:AE65").Value, 2, False) 'twos
OrderTemplateSettings.Label84.Value = HLookup(x, Range("A2:AE65").Value, 3, False) 'fives
OrderTemplateSettings.Label85.Value = HLookup(x, Range("A2:AE65").Value, 4, False) 'tens
OrderTemplateSettings.Label86.Value = HLookup(x, Range("A2:AE65").Value, 5, False) 'twenties
OrderTemplateSettings.Label87.Value = HLookup(x, Range("A2:AE65").Value, 6, False) 'fifties
OrderTemplateSettings.Label88.Value = HLookup(x, Range("A2:AE65").Value, 7, False) 'hundreds

View 2 Replies View Related

Userform To Act As A Login With A Password To Use The Spreadsheet

Apr 12, 2007

I have come up with the idea to create a userform to act as a login page for my project. I have the project complete and need a way to protect it. I want the userform to display an input box asking the user to enter their 'login ID'. This has to be either "SUPERVISOR" or "STAFF". Or If I have a table of 'users' and 'passwords' in sheet (USERS) to match them against that if it is easier?

Upon correct entry i need it to then display another input box asking for a 'password'. This needs to be "SHOES" for both logins. If the login is not equal to SUPERVISOR or STAFF I need a message box displaying "username incorrect". and for it then to show the input box requesting the 'login ID' again. Again if the password is not equal to "SHOES" to display a message box displaying "password incorrect" Then show the input box requesting the password. Upon correct entry for both the username and password i would like my other userform to show. This is displayed by:

Load UserForm1
UserForm1.Show

I would like the correct 'username' to be displayed in cell "D27" on the active sheet and 'password' to be displayed in cell "F27" also on the active sheet To show who is 'Logged On'. If there is a way to display the password using asterix's for security that would be useful.

View 6 Replies View Related

Updating Spreadsheet Post Userform

May 22, 2007

(1)I am using a userform (this contains a listbox) to update cell A1 which in turn updates a cell B1.

(2)I then run the next userform on cell A2 which should update its listbox from column B (which has just been updated previously).

My problem is that following step (1) the spreadsheet gets updated but when I processed to step (2) the listbox within the userform is not updated to show the information now in column B.

Finally, if I run the user form again (same as step (2)) the listbox has been updated .

View 9 Replies View Related

Work In Spreadsheet While Userform Is Open

Mar 20, 2008

Problem: I have textbox entries that are part of a Userform that opens using a macro on a speadsheet button. Once this form is open, I can no longer actively work in the spreadsheets.

Need: I need a way to minimize or "put on hold" the Userform so that I can freely move around in the spreadsheet. This could be in the form of a button on the Userform. Then, I need a way to bring back this userform to the point I was at before being put on hold so that I can continue to input entries into the textboxes (again, a buttton that could bring it back). There should be a way to toggle between both worlds.

View 2 Replies View Related

Find Next Empty Row

Jan 17, 2010

I am trying to copy data from one sheet and paste it on a new row on another sheet, but the code keeps pasting the data on the first row.

Private Sub SubmitButton_Click()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim iRow As Long

Set ws1 = Sheet1
Set ws2 = Sheet3

ws1.Select
Range("B2").Select
Selection.Copy
ws2.Select..................................

View 9 Replies View Related

Find Next Available Empty Row

Feb 12, 2008

I have a macro recorded in Spreadsheet 1 and it copies certain cell values and certain data range to another spreadsheet 2. Only problem is Spreadsheet 1 is distributed to several users and when I receive them I run the Macro. With my current Macro, it always pastes data at fixed cell instead of finding a new empty row. What do I need to add to my existing Macro to perform this task?

View 2 Replies View Related

Copying Data From UserForm To SpreadSheet And Back Again?

Feb 21, 2013

We created a database for our employees who have security items and other things we need to keep track. We created a spreadsheet where data was entered on Sheet2 (Entry Form) and then by clicking various buttons would be thrown over to Sheet1 (MasterList) and put in alphabetical order. Then last week he said lets change it to a User form where i can put all the data, be able to tab through my text boxes and make the whole process of entering information faster and more efficient.. but now hes gone and I'm left with his macros and all this stuff i don't really understand! I have been doing pretty well on my own but im stuck "Search Employee" Here is what i have...


VB:
Private Sub SearchEmployeeButton_Click()
LastName.Value = Range("A500").Value
FirstName.Value = Range("B500").Value

[Code]....

use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.

View 2 Replies View Related

Enter / Lift Data From Spreadsheet Into UserForm?

May 27, 2014

I have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).

I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.

In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.

This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved