Find Specific Character - Copy Into Next Row & Continue
Mar 13, 2008
I have an excel file in which the cell has more than 3000 entries, like following. I would like to copy the contents before ";" to next row & continue.
Answer should be in excel:
CN=123,CN=12,CN=ABC,CN=AB
CN=345,CN=34,CN=CDF,CN=DC
CN=510,CN=51,CN=PQR,CN=PQ
I do not know how can I achieve this through "Macro". I would like to detect ; in the cell & copy the contents before/after it in the next rows & continue till the last figure.
Cells A1:A5 all have a vlookup formula that will pull one of the following into it:
1. The word "NONE" 2. #N/A error since it doesn't exist in the table 3. A text value that has the format 13.55.46.91
I want a formula that will look at these 5 cells and give me #3. That #3 value can only appear once in the 5 cells in any of those 5. The other 4 cells will contain either 1 or 2.
3 always has length equal to 11. It always has periods in those places. The digits do change.
2014-05-15 02:08:43 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 02:31:37 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 02:37:19 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 02:37:20 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 03:07:19 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 15:01:37 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 15:04:46 @Centre INFO - CHANGE WORLD (Original World to Destination World)
I would like to use conditional formatting to highlight cells which have the same first 16 characters (yyyy-mm-dd hh:mm) before the "@" AND that contains the words "CHANGE WORLD". Therefore, I'm looking for a formula I could include in the conditional formatting so I can easily find the "CHANGE WORLD" that occurred at the same time (minus the seconds, they may vary slightly).
I am trying to build a macro that will search a column for the word "TEST" and when it finds that word it needs to prompt the user with a YesNo message box (or something similar) if they would like to delete the entire row that contains TEST. If Yes is selected, it should delete the row and continue on to find the next TEST in the column and repeat this process. If the user selects No, it should continue on to find the next TEST in the column and repeat this process.
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go
I have data that is on a separate .txt file (the source file) that resembles this;
A B C D E F
1 Case District Pct Division Level1 Level2
2 305035 0 20 72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
1) In any cell, I would like to remove "Area#xxxxxxxxx" (where x are random numbers).
Example : "INFO Log - [sys] Area#541185471Character#46545"
2) I would like to remove x characters before a word.
Example : 2013-08-28.txt@INFO
I would need to remove 14 characters before the character "@".
I tried to play with the LEN and RIGHT/LEFT formula but so far, I can't get it to work... The idea is to parse some text and remove the part in red (I was thinking about using SUBSTITUTE).
Essentially what I'm trying to accomplish is import a file from Quickbooks and determine whether it was a Credit Card, Check or Invoice based on the account number.
For example:
45-12345 should return the value CC in an adjacent cell because it contains the "-" character. I0123456 should return the value INV in an adjacent cell because it contains the "I" character. 01234567 should return the value ACH in an adjacent cell because it doesn't contain either character.
I tried using VLookup, but I can't figure out how to write a formula for when it just contains a character, only if it matches it or is text/number.
Switched to Excel after using OpenOffice and I'm stuck on knowing what an old a 'find and replace' formula would be in Excel. It would remove a specific character (or word) ONLY if it was the last characters in a cell.
The old find and replace for open office: Find: (.*)/$ Replace: $1
It's not that important now to delete a word, mainly the last slash '/' ONLY if it's the last character e.g. this data has 2 rows with a '/' as the last character
I have a row of cells that contain a single letter: W,C,O.
I need to provide a count of the number of occurancies of each letter. So I have a cell that shows me the total W's, a cell showing me total C's and another showing total O's.
Whats easiest way to do this?
I know its not ideal, but on this occassion ive no desire to add and hide another column.
How to get Excel to select all cells within a specific column that contain a specific character. In this instance, I need to select all the cells which contain a comma...
And even better would be if I could get Excel to not just select all the cells in a specific column containing a comma, but each of the rows in which those cells reside.
I need to make a list of Part Numbers in quotation marks. If a number of digits of a P/N is less than 13 a number of space characters has to be added to make the string 13 characters long.
We have example P/N: 1234567890123 12345678 123456
should become: "1234567890123(no extra space characters should be filled-13chars)" "12345678(5 extra space characters here)" "123456(7 extra space characters)"
Is there a function that inputs a cerain number of a specific character ("space" in this example)?
I have one column with many numbers. Some have one dash and some have two.
Example: 123-123456-65 012-789546-1 98B12354-889
Is there a way that I can remove all characters after the last – (dash) in the number? Example:
If number is 123-123456-65 Then 123-123456
If number is 98B12354-889 Then 98B12354
If someone could just lead me in a direction, I might be able to figure it out. However, my code is elementary and most of the time, I record macros and the play with the code until it does what I want.
I have a cell that has approx 22000 characters. I'm trying to remove a specific character string from a cell by doing a find and replace with "". It works for characters in the first part of the cell but not for characters in the last part of the cell.
Example: I do a find/replace for the characters 21242 to "" in column A and I get the expected results. I do a find/replace on 69294 to "", again I get the expected results, but if I do a find/replace on 85203 to "", I get "Excel cannot find what I am searching for" (but its there!)
My cell size is within the max size of 32,767 characters so not sure why its not working.
I would like to find the position of the last occurrence of a character in a string. For example, I have a string with the following:
"c:wwgpeToolbidsTest File.GP$".
I would like to find out the position of the last '' in the string because I want to pull the filename, 'Test File.GP$' into a variable. I would like to avoid writing code to do this. Are there some Excel functions I can use for this?
I have attached the 2 workbook, master & transaction. From master workbook column F column name "EXIST DOCUMENT" values need to find in the transaction workbook column D column name "Documents". If match found in the column D substring field, it need to replace with column G column name "NEW DOCUMENT" value from master workbook.
The transaction workbook need to be given as input workbook, when the macro is get executed from master workbook.
