Cells A1:A5 all have a vlookup formula that will pull one of the following into it:
1. The word "NONE" 2. #N/A error since it doesn't exist in the table 3. A text value that has the format 13.55.46.91
I want a formula that will look at these 5 cells and give me #3. That #3 value can only appear once in the 5 cells in any of those 5. The other 4 cells will contain either 1 or 2.
3 always has length equal to 11. It always has periods in those places. The digits do change.
how I could find 1 character and replace the entire cell. For example, it would find "<12", "<3", and "<32" based on "<" and then replaced that entire cell with "N/A".
If I have a cell which begins with a few spaces and then has a character, how do I use the find function to see how many spaces until some character is present in the cell. The * does not work with this.
I have a cell which will contain SER01+SER02+SER03
and what i need it to contain is [SER01]+[SER02]+[SER03]
and shocker is i've got this to work for the first instance but not the other two
code as below... be grateful for your help
Sub measure1() Dim list As String, pos As Integer, refl As String, refr As String, newlist As String list = Cells(1472, 16).Value pos = InStr(list, "+") refl = Left(list, pos - 1) refr = Right(list, pos + 1) newlist = "[" & refl & "]" Cells(1472, 17) = newlist End Sub
I need to extract the rightmost part of a cell, from the last "/" character in the cell. Problem is, there may be several /s in a cell and I need to identify the last one of them.
I have a cell that has approx 22000 characters. I'm trying to remove a specific character string from a cell by doing a find and replace with "". It works for characters in the first part of the cell but not for characters in the last part of the cell.
Example: I do a find/replace for the characters 21242 to "" in column A and I get the expected results. I do a find/replace on 69294 to "", again I get the expected results, but if I do a find/replace on 85203 to "", I get "Excel cannot find what I am searching for" (but its there!)
My cell size is within the max size of 32,767 characters so not sure why its not working.
I would like to find the position of the last occurrence of a character in a string. For example, I have a string with the following:
"c:wwgpeToolbidsTest File.GP$".
I would like to find out the position of the last '' in the string because I want to pull the filename, 'Test File.GP$' into a variable. I would like to avoid writing code to do this. Are there some Excel functions I can use for this?
I have attached the 2 workbook, master & transaction. From master workbook column F column name "EXIST DOCUMENT" values need to find in the transaction workbook column D column name "Documents". If match found in the column D substring field, it need to replace with column G column name "NEW DOCUMENT" value from master workbook.
The transaction workbook need to be given as input workbook, when the macro is get executed from master workbook.
I have a macro that asks the user to enter a file name and have written a small function to search the name given to the file to find any invalid characters, trouble is I must be doing something wrong as I doesn't work. Everytime I write something in the box I'm told it's invalid, regardless of weather it actually is or not.
I can use the FIND function to find the first occurrence of ":" and therefore select everything to the right of it, but how do I locate the second occurrence of ":"?
I want to segregate the 7985 Medicare. What if the data varies, i.e. some rows have one occurrence of ":" and others have two?
7900 Personnel: 7970 Bonus. I always want to segregate the last 4-digit account number and description.
I am trying to work out how to get nth position of a character in a string. For example in this
Code:
kjishdfiuayigdscka if I use the formula Code: =FIND("i",I$1),
it will give me answer 3. But I want the position of 3rd "i" in the string. The answer should be 12. How can I change this formula to get the correct result?
I am trying to remove the last 6 character from a variable. I worked out how to do it using formula's in XL, but want to move this in to VBA. Currently I have this
I am reading lines from a textfile. Each line in the textfile has the identical format: textstring1:textstring2. The two strings are always separated by the : character. I have the code to get textstring1, but because I'm a rookie, I can't figure out how to get textstring2. See the code in bold, this is the line I need to get textstring2.
I'd like to search for text and get the column character where the cell with the found text. The combination the two 'demands'/formulae into one are giving me problems. And the fact that the column character can exist out of two characters I cannot solve.
I can get the column number with HLookup right? and it gives me the column number, not the character. I can solve this partially (and ugly even more) with =Char(((Hlookup etc)+64 (letter before A))).
Row 2 to 5 are of same item no. The result that is required is in Column C. The formula to check same item numbers in column A and give the result as "FRA" in column C3 with C2, C4, C5 showing as not applicable. Similarly for the next item no
I have an excel file in which the cell has more than 3000 entries, like following. I would like to copy the contents before ";" to next row & continue.
Answer should be in excel: CN=123,CN=12,CN=ABC,CN=AB CN=345,CN=34,CN=CDF,CN=DC CN=510,CN=51,CN=PQR,CN=PQ
I do not know how can I achieve this through "Macro". I would like to detect ; in the cell & copy the contents before/after it in the next rows & continue till the last figure.
2014-05-15 02:08:43 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 02:31:37 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 02:37:19 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 02:37:20 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 03:07:19 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 15:01:37 @Centre INFO - CHANGE WORLD (Original World to Destination World) 2014-05-15 15:04:46 @Centre INFO - CHANGE WORLD (Original World to Destination World)
I would like to use conditional formatting to highlight cells which have the same first 16 characters (yyyy-mm-dd hh:mm) before the "@" AND that contains the words "CHANGE WORLD". Therefore, I'm looking for a formula I could include in the conditional formatting so I can easily find the "CHANGE WORLD" that occurred at the same time (minus the seconds, they may vary slightly).
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
I'm looking for a VBA Macro that will do the following:
1. Count number of cells in a given row that contain special character "*" 2. If there is an asterisk in a given row, return the column header(s) contained in row 1 of the spreadsheet that correspond to each instance of cell(s) that contains the "*".
Is there a way to do this? I've attached an example of what I'm talking about, (Column A shows the desired result.)
I have got a list of numeric abbreviations, for instance 10739011/21/31/41. What it should really display are the numbers 10739011, 10739021, 10739031 and 10739041 (the first six figures stay the same). All the numbers in my list are 8 figures long. I want to change the list from the list seperated by the backward slash to the complete numbers. I have uploaded an example of the list with backward slash between the numbers. Is there a way that Excel can automatically change these numbers to the full numbers?
Because all the numbers are 8 figures long, I thought the first 6 figures of the 1st number can be copied and those 6 figures pasted before the other two figures after the backslash. Auto Merged Post Until 24 Hrs Passes;sorry, pressed OK too quickly. The problem is that there are sometimes 4 numbers in the cell, sometimes 6 and once three. I would like Excel to complete all the numbers in the cell and then move on to the cell underneath it and so on. Also, I would like each number to have it's own cell.
