I need a Macro that will search the range A6:A19 for a match to A3. Once a match is found I want contents of B3:F3 pasted in the corresponding row that the match was found in. In this example contents of B3:F3 would be pasted in B13:F13
View 15 Replies
I basically need to copy/move the text in column E, from vertical to horizontal using VBA when column C is the same. Then delete the extra lines. eg. C1:C3 = 1, so all the text from E1:E3 needs to goto E1:G1, then Rows 2&3 can be deleted as they are no longer needed. (Note: there are not always 3 instances, this can vary from 3-10). Its a bit hard to explain so i have included the Sample-finished.xls file as this is how it needs to look once its complete.
View 3 Replies View RelatedI have a spreadsheet (range A1:P5000). B2:B5000 would contain cheque numbers. Many of the cheque numbers would be repeated and would have common data in columns C, D, E, F, G, H, L and N.
I am trying to get VB code to copy and paste the common data when a user enters a cheque number.
For example:
When a user enters a cheque number in B3, VB would check B2 for a match. If a match is found, then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C3, D3, E3, F3, G3, H3, L3 and N3. If no match is found, then the user would have to manually enter the data in C3, D3, E3, F3, G3, H3, L3 and N3.
When a user enters a cheque number in B4, VB would check the B2:B3 for a match. If a match is found (in B2 – for example), then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C4, D4, E4, F4, G4, H4, L4 and N4. If no match is found, then the user would have to manually enter the data in C4, D4, E4, F4, G4, H4, L4 and N4.
When a user enters a cheque number in B100, VB would check the B2:B99 for a match. If a match is found (in B90 – for example), then VB would copy C90, D90, E90, F90, G90, H90, L90 and N90 and paste them in C100, D100, E100, F100, G100, H100, L100 and N100. If no match is found, then the user would have to manually enter the data in C100, D100, E100, F100, G100, H100, L100 and N100.
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
Random values will be pasted into sheet1. I a looking for a macro that will look for a match to the values in sheet1 column A in Sheet2 Column A. When a match is found it will paste the entire row from Sheet2 to sheet#3
See the example. Note: the match will always be an exact match.
The following is a sample spread sheet similar to ones I use daily.
I am trying to create a macro that will help me do the following.
Look for the same account # shown in Column A to Column F. If the account # matches, copy the total Value in Column H to the correct account in Column C.
The problem here is that In column A, i've placed some headings so i'm not too sure if that'll cause a problem.
- I copy some records from a Database into an Excel sheet in workbook (say W1) in the Worksheet WS1.
- The i look up for values in a column (say column B) of W1 in another worksheet in another workbook(say W2) .
- If i find a match in Workbook 2(W2) ,Worksheet 1 , Row 2, Column A ; i look at the values in the Column B, F,G on the Row 2 itself.
- Each of these values can be found in the corresponding Worksheets 2;3;4 in the Workbook2(W2) .
- Then i need to pick up all these values from worksheet 1;2;3;4 in W2 and contatenate them and put them in the Workbook W1 against the Row .
- Similarly i process all the non zero rows in the workbook W1.
I'm currently making a database of my DVDs and BluRays, and thought that doing it in Excel, would make it nice and easy to see.
Tho, after some testing on my own, and redoing some of the sheets, to make it easier and less work, I'm stuck ....
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
I am trying to find text in one workbook and paste it into another. I've tried a Vlookup, and now I'm trying a Find, and neither is working.
This is what I have so far...
Sub FindAddress()
Dim GCell As Range
Dim Page$, Txt$, MyPath$, MyWB$, MySheet$
Txt = "N.A.V."
MyPath = "T:01862a7R228 Reports2039067"
[Code] ...........
I have two spreadsheets, A & B. In spreadsheet A, user will input a contract number and values for the contract. The user inputs the contract number in cell D4. I have linked this cell to cell B1 of spreadsheet B.
I want Excel to
-copy values from spreadsheet A
-then go to spreadsheet B and find the value of B1(which is the contract number entered in cell D4 of spreadsheet A)
- arrow over 14 columns
- then paste
here's the code i have so far. No matter what contract I input in cell D4 of spreadsheet A (when i step through the code) excel always takes me to cell C10 of spreadsheet B!?!?!
note: the code is in a module in spreadsheet A
Sub find_contract()
'
' find_contract Macro
' Macro recorded 03/15/2007 by b944553
Im trying to get some VBA to search in my worksheet to find a match to the value of cell B5 (the value of B5 changes depending on user choice), then once a match is found I want to highlight from the matched cell to the right 5 columns and down to row 193 (so in total 6 columns would be highlighted down to row 193), then copy and paste special values over those cells.
View 9 Replies View RelatedThe macro finds the value in cell D11 (which is the name of a product) in a worksheet called "Summary1". It then looks for this value in another worksheet called "Output", specifically in a column with a named range called "Products". If the value being searched is found in the "Products" named range column (in the worksheet "Output"), the code below copies the entire row for it, to another sheet called "OutputSummary1". I would like to change the code as follows:
1) Instead of copying the entire row, for which the searched for value is found, from the sheet "Output" to the sheet "SummaryOutput1", I would like to instead only copy the values in columns A, B, and E to the sheet "OutputSummary1". Also, I would like the values to be pasted pastespecial so that the formulas in the sheet "Output" are not copied over, and only the values are copied.
2) Secondly, I would like to know how to perform the find procedure (searching for cell D11 contents) on all sheets in the same workbook beginning with the word "Summary" (There will be worksheets called Summary1, Summary2, Summary3, etc. that the macro should be performed on.) As well, the pasting should be perfomed on all respective sheets called OutputSummary1, OutputSummary2, OutputSummary3, etc.
Sub CopyPaste()
With Worksheets(1).Range("Products")
Set c = .Find(Worksheets("Summary1").Range("D11").Value, LookIn:=xlValues) 'this identifies the value D11 in worksheet called Summary1
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Copy Destination:=Worksheets("OutputSummary1").Range("a" & Worksheets("OutputSummary1").Range("a65536").End(xlUp).Row + 1)
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
Here is some sample code I found on the internet similar to mine:
Windows("Waterfall 1.xls").Activate
Cells. Find(What:="accounts", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Windows("test Schedule.xls").Activate
ActiveCell.Offset(0, 0).Range("A1").Select
Application.CutCopyMode = False
ActiveCell.Offset(0, 1).Range("A1:G1").Select
Selection.Copy
Windows("Waterfall 1.xls").Activate
ActiveCell.Offset(0, 2).Range("A1:G1").Select
ActiveSheet.paste
Windows("test Schedule.xls").Activate
ActiveCell.Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "4"
ActiveCell.Offset(0, -1).Range("A1").Selectp.
I now understand that there's a way to remove the activate statements, while still selecting that document to work with, and therefore greatly increasing the speed.
I am trying to find out if it is possible to create a macro in an excel workbook that will open another workbook saved on the computer, perform a find, copy specific data, and paste it in the opened/active workbook.
View 8 Replies View RelatedI am going to explain the issue with a photo linked below
Capture2 | Flickr - Photo Sharing!
Basically i want to match data from column one with data from column 3 if true then copy the data in column 2 to columns 4 in the same match row.
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
Finding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
I am trying to achieve something like this :
Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.
This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
There are two problems to solve :
My Excel workbook is composed of 2 sheets. The first one is a Dashboard (Sheet1) and the second one (Sheet13) is where the data is.
I would like to press a button on the first one, enter the text to be found into an Inputbox and then copy-paste cells from the second sheet (containing the data) into the first one.
The data is structured in rows, from A to V columns.
I would like, according the row where is located the found cell, copy given given cells from Sheet13 to Sheet1.
Right now, I have a macro performing the search like desired and selecting the found cell :
Code:
Private Sub CommandButton1_Click() Dim FindString As String
Dim Rng As Range
FindString = InputBox("Entrer le contrat de support - rechercher (DSI....) ")
If Trim(FindString) "" Then
With Sheet13.Range("V:V")
Set Rng = .Find(What:="*" & FindString & "*", _
[Code] .......
I would like to copy cells located in the columns A, B, D, E, F, K, S, (T:U) from the row where the searched string has been found in Sheet13. It has to be copied on Sheet1, on two rows : (N29:Q29) & (N30:Q30).
When a new research is done, the previously copied cells should be cleared out.
2. The second point is about duplicating a button with an associated macro. The macro is running like I want but I have to insert 299 more buttons, with the updated formula according to the row where it is located.
However, one part of the macro has to stay the same because all of these 300 buttons increment a single counter located on Sheet1.
Code:
Sub Button2600_Click() If MsgBox("Etes-vous sûr de vouloir ajouter 1 année de support pour" & vbNewLine & Range("E7") & " " & "(" & Range("F7") & ")" & " ?", vbYesNo + vbQuestion, "Modification du Contrat de Support") = vbYes Then
Sheet13.[A7] = DateAdd("yyyy", 1, [A7])
MsgBox "Contrat étendu d'une année."
Dim x As Integer
x = Sheet1.[R11].Value
Sheet1.[R11].Value = x + 1
End If
End Sub
You can get the excel workbook at the following link : [URL] ....
I have 10 worksheets. They are labelled 'FEB', 'MAR', 'APR', etc...to 'NOV' (NB: JAN & DEC not needed). In column "G" on all these sheets I have the data as "CURRENT" or "OVERDUE". The first 3 rows on every sheet are headers, so the data starts at 'G4' on every sheet.
I then have an "OUTSTANDING" sheet which will display all of the "OVERDUE" items from the various months. I have an UPDATE_Click() event which when actioned needs to search all the column Gs in the month sheets and then copy the data from column 'B' to 'F' of the corressponding row to an "OVERDUE" result. The data from B-F then needs to be pasted in the next available row on the "OUTSTANDING" worksheet (starting at row 4, as first 3 rows are headers with merged and unmerged cells).
Nothing fancy, when the search go does the column and hits a blank cell that means its the end of the list and can move on to the next month.
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies View RelatedLooking for days and I have tried all kinds of things but nothing works. The lates was the Kickbutt find function. Let me explain what I am tring to do. I have an estimate work book with 11 diffrent sheets of material. When I create an estimate I go thru the sheets and select the quanitity of each material needed. What I would like to do is search thru all the sheets and find all the quanititys in column A greater than 0, the copy the complete row A to F to a sheet named FoxOrd.
Trying AronBloods "Kickbutt find function" seemed to be the code to use but I could not get x = " >0 " to work. So I got rid of all the default 0 in the qty column and just left it blank and changed the code to x = "*" which searched and found all the numbered rows but this included the header row when pasted to the order sheet
I work for a chicken hatchery. So, a couple preliminary things by way of explanation:
1. The day we place our eggs in the incubators, we fill in an excel file containing a list of all the farms from which those eggs came. This is called the "Egg List" workbook.
2. After 21 days have passed, and the eggs have turned into chicks, we open that original file. We copy cells from one column of that file (the workbook is called the “Egg List”, we copy “Sheet1” cells B7:B50), and paste them into another Workbook called “Chick List.”
My question is this:
Is there a macro I can put into the “Chick List” workbook that will automatically locate that particular “Egg list” workbook file that is 21 days old, and paste the contents of its cells B7:B50 into cells A7:A50 in my “Chick List” Workbook. It is preferable if this can be done without opening the old “Egg list” file. But if this is not possible, I’ll take whatever I can get.
Here is what I have, which works okay as far as finding the file. I bootlegged this from another part of this helpful website. But I cannot figure out the syntax for getting cells B7:B50 from the Egg list to copy into cells A7:A50 of the Chick List.
Dim FSO As Object
Sub ProcessFiles()
Dim i As Long
Dim sFolder As String
Dim fldr As Object
Dim Folder As Object
Dim file As Object
Dim Files As Object
Dim this As Workbook
Dim cnt As Long
Dim filenew As Object
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
