I have a row of dates with a variable number of nonblank cells between them. e.g.:
A1 1/9/12
B1 6/9/12
C1
D1 8/9/12
E1
F1
G1 12/9/12
I want to calculate the NETWORKDAYS between dates, but where there is a blank cell, I want to be able to use the date in the previous nonblank cell. For example, NETWORKDAYS(B1,D1), if cell C1 is blank or NETWORKDAYS(D1,G1), if cell F1 is blank.
how to get the value of the previous nonblank cell and nest it inside the NETWORKDAYS formula?
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012 Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012 Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
I'm trying to use the find() function (or another if it exists) to find a previous non-empty cell.
Basically, the active cell will be ain a column with mostly empty cells, and I need it to move up the column looking for the previous cell that is not blank. I could do it with a loop, but I'd rather not if possible.
If nothing is put into say D5 D6 or D7 but something is put in D8 then i would like E8 to become 1 as it is the first to be filled.Then when D9 has something in it, it becomes 2 if D10 has nothing in it it gets left blank but when d11 has something in it e11 becomes 4 counting the blank cell in between.
I have a column with random numbers of blank cells.
I have a method of looking up a particular number in this column, but I want to be able to display the number in the first cell that is above it, that contains a number.
Is there some way to use the first cell (that is not blank) above a given cell in a function? How can I reference this cell?
The numbers in this column are not in order.
I am using this to find the first and last date that a particular group of shares were purchased.
I have a list of #'s starting from 1, and the next cell down adds 1 to that.. based on some other info, it will either add 1 or come out blank.. i want to be able to have cell A1 point out which is the last cell that has a number and is not blank.. does this make sense?
Here is the formula in this column..
In this sheet cell L284 has the same formula in it as cell L283, however because R283 is blank it also comes out blank...
Here is a copy of the sheet.. I want cell A1 to equal 282 in this example...
I am trying to find the last non blank cell in a row. I am using the following line of RC = Range("IV" & AR).End(xlToLeft).Column
It does not quite work for me, because there are what appears to be blank cells in the row but there is a formula that is auto filled and returns a blank. Can this line of code be modified or is there a different line of code I can use.
I need to know the value (which is a date) of the first non-blank cell in a range in a row. I have found some array formulas, but they either return it for the whole row (which I don't want), or they return text (which I don't want), or they don't work at all.
The range is: B9:FL9. Some of the cells in this range are blank, some are "0", and some contain dates. I need to know the most recent (furthest left) cell that contains a date and what that date is.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8") For Each aCell In rng Selection.End(xlDown).Select Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am trying to write a macro and i am having trouble hgetting it right. I have large amount of data in columns and what I would like to do is the following.
1. First I need to find the first blank cell in that row.
2. After finding the blank cell, I would like to compare the value in 3rd column from the blank cell( For example if the last blank cell is Row1,ColumnR then I need to Compare Row1,ColumnO) with Column E ( Is always Column E).
3. Based on above example if Row1,ColumnO>Row1,ColumnE, then goto next row else Row1,ColumnR value should be Row1,ColumnE and I would like to get Row1,ColumnS and Row1,ColumnT vaues to be same as last 2 columns from the blank cell which was determined first (i.e., from above example Row1,ColumnS and Row1,ColumnT vaues to be same as Row1,ColumnP and Row1,ColumnQ).
4.I would like to perform the above procedure for all the rows in the worksheet and the blank cell may be anywhere in the column for that particular row.
I don't know whetehr it is possible to write a macro to perform above procedure or i need to do that manually which i hate as i have large amount of data.
I am try to write a bit of code which will find the non blank cells in column H (Range H4:H24) and when it finds a non blank cell make column C in that row the active cell and then run a macro. Once the macro as been run i would like it to look for the next non blank cell.
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
s/s is 325501 rows deep. Column C contains names. Column J contains scores. I need column N to give me the highest score a name has previously achieved. (please see small attachment for illustration). If i can get a formula then I can fill this down.
This code (partial) was written to interrogate a database. Cell "A2" of another tab contains a Part Number to be sought.
Target = Range("A2") Sheets("Kanban Data").Select Dim Nrow As Range Dim N As Integer On Error Resume Next With Sheets("Kanban Data") Set Nrow = .Columns(2).Find(What:=Target, After:=.Cells(3, 2), LookIn:=xlValues, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False)
If the Find expression (as pulled down from the Edit menu) is empty, then inserting a Part Number in A2 and executing the macro finds the correct record and returns the its correct row number (N, as defined afterwards in the code). Then, changing the Part Number in cell A2 and executing a new search returns the SAME row as the previous search, despite Target being equal to the new sought after value.
I have a row of 2900 single letter (middle initals) however 222 users have no middle inital. this is a password scheme and need 7 digits, without the middle inital i only have 6. so I want to replace all 222 cell that are blank with a dash can this be done without doing each by hand?
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12. On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1 2. Copy the entire row containing the non-blank values 3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
Excel 2003. I have a list of names in column A, dates in column B, I need the difference between dates for the people in column A, I am doing it now with the formula shown but I need a formula to put in column C that will look at the name in column A, for that row, and then find that name above it and give me the difference between the to dates in column B. So in the example below if I put the formula in C7 it would look at A6-A2 for harry and then give me the difference between B7 and B4, 6 days, if there is not a match return blank.
I need a function where for a given date will return the date of a specified weekday in the previous week.
Example: If today is Friday Sept. 25th 2009 and I want to find the date of the Wednesday in the previous week I would need something like DATEPREVIOUSWEEK("09/25/2009", vbWednesday)
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
I have this table, which can be seen as a basic custom gantt chart: KLRWo.png
And I would like to fill the A column with start dates, based on the first filled cell of the range on the same row, and the header value of its respective column (row 1). It's easier to show my expected result than write it actually:
I have a listing with Middle Initials in column D. D also contains dates and Names. I want to remove the Middle Initials only. I need to do this without moving around cells. So a Find:="A", Replacement:="" type of situation. Right now I have 26 two line entries to take care of this, but I know it has to be easier and use less lines. (Trying to consolidate code for a better look).
Here is some of what I have (that works, but is long):
I need to find the total number of rows down to the next blank cell (and then perform a function based on that number).
I'm using:
CountA(A1,xlDown) Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.
I would like to use something like:
totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown")) If totalRows = 4 Then ActiveCell.Offset(1, 0).Range("A1").Select Selection.Cut ActiveCell.Offset(-1, 1).Range("A1").Select ActiveSheet.Paste etc.
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry A B C D E 1X 2X 3X 4 5X
Second Entry A B C D E 1XY 2XY 3XY 4Y 5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
