I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12.
On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
spreadsheet 1: Lookup from Order numbers listed from A5:A177. requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2: Lookup value:Order number listed from F19:F191. Data search:AY19:CI191 return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1 2. Copy the entire row containing the non-blank values 3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
In table 1 you will see that not all rows contain data (this is because i have removed it previously with a macro) the second table shows what i want the macro to do but without deleting rows:
A Hiddenrow with formula B C
[Code]....
So basically i would like a macro to search for the first none blank value in column A and copy the row to the first available blank row , it also needs to blank out that row once done. i.e row 3 would be moved up to row 2, 5 up to 3, 7 up to 4 etc etc.
The hidden rows contain formulas which cannot be deleted or my ws goes Pete Tongue.
I'm trying to use a lookup function that when encounters a blank cell, it uses a 0 to factor into an equation. In the lookups, like d9, if there is a blank cell, I would like it to use a 0 factored in. I keep getting #N/A.
I have a column with random numbers of blank cells.
I have a method of looking up a particular number in this column, but I want to be able to display the number in the first cell that is above it, that contains a number.
Is there some way to use the first cell (that is not blank) above a given cell in a function? How can I reference this cell?
The numbers in this column are not in order.
I am using this to find the first and last date that a particular group of shares were purchased.
I have a list of #'s starting from 1, and the next cell down adds 1 to that.. based on some other info, it will either add 1 or come out blank.. i want to be able to have cell A1 point out which is the last cell that has a number and is not blank.. does this make sense?
Here is the formula in this column..
In this sheet cell L284 has the same formula in it as cell L283, however because R283 is blank it also comes out blank...
Here is a copy of the sheet.. I want cell A1 to equal 282 in this example...
I am trying to find the last non blank cell in a row. I am using the following line of RC = Range("IV" & AR).End(xlToLeft).Column
It does not quite work for me, because there are what appears to be blank cells in the row but there is a formula that is auto filled and returns a blank. Can this line of code be modified or is there a different line of code I can use.
I need to know the value (which is a date) of the first non-blank cell in a range in a row. I have found some array formulas, but they either return it for the whole row (which I don't want), or they return text (which I don't want), or they don't work at all.
The range is: B9:FL9. Some of the cells in this range are blank, some are "0", and some contain dates. I need to know the most recent (furthest left) cell that contains a date and what that date is.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8") For Each aCell In rng Selection.End(xlDown).Select Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am trying to write a macro and i am having trouble hgetting it right. I have large amount of data in columns and what I would like to do is the following.
1. First I need to find the first blank cell in that row.
2. After finding the blank cell, I would like to compare the value in 3rd column from the blank cell( For example if the last blank cell is Row1,ColumnR then I need to Compare Row1,ColumnO) with Column E ( Is always Column E).
3. Based on above example if Row1,ColumnO>Row1,ColumnE, then goto next row else Row1,ColumnR value should be Row1,ColumnE and I would like to get Row1,ColumnS and Row1,ColumnT vaues to be same as last 2 columns from the blank cell which was determined first (i.e., from above example Row1,ColumnS and Row1,ColumnT vaues to be same as Row1,ColumnP and Row1,ColumnQ).
4.I would like to perform the above procedure for all the rows in the worksheet and the blank cell may be anywhere in the column for that particular row.
I don't know whetehr it is possible to write a macro to perform above procedure or i need to do that manually which i hate as i have large amount of data.
I am try to write a bit of code which will find the non blank cells in column H (Range H4:H24) and when it finds a non blank cell make column C in that row the active cell and then run a macro. Once the macro as been run i would like it to look for the next non blank cell.
I have a row of dates with a variable number of nonblank cells between them. e.g.:
A1 1/9/12 B1 6/9/12 C1 D1 8/9/12 E1 F1 G1 12/9/12
I want to calculate the NETWORKDAYS between dates, but where there is a blank cell, I want to be able to use the date in the previous nonblank cell. For example, NETWORKDAYS(B1,D1), if cell C1 is blank or NETWORKDAYS(D1,G1), if cell F1 is blank.
how to get the value of the previous nonblank cell and nest it inside the NETWORKDAYS formula?
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
Working on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.
Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION
I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.
PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"
TYPE TABLE: Sweater SWTR T-Shirt TSHT Jeans JEANS
COLOR TABLE: Blue BL Green GN Purple PL Black BK
I would have separate tables for each part of the description.
The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.
I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.
I have a row of 2900 single letter (middle initals) however 222 users have no middle inital. this is a password scheme and need 7 digits, without the middle inital i only have 6. so I want to replace all 222 cell that are blank with a dash can this be done without doing each by hand?
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
I have a large database of equipment on one sheet and an input form on another. For inventory control, when a user scans a number into the input form, the main inventory sheet is updated with the current location. I have it working using functions, but I need to do this in VBA. I am looking to do the following;
User enters 2222 on the input form. The code matches 2222 on the inventory sheet, moves the activecell 10 columns and updates a value in that cell. Cell A2343 is "2222" then Cell K2343 is changed to "WAREHOUSE 4". What is the best way to find the match and then select that cell in VBA?
I have this table, which can be seen as a basic custom gantt chart: KLRWo.png
And I would like to fill the A column with start dates, based on the first filled cell of the range on the same row, and the header value of its respective column (row 1). It's easier to show my expected result than write it actually:
I have a listing with Middle Initials in column D. D also contains dates and Names. I want to remove the Middle Initials only. I need to do this without moving around cells. So a Find:="A", Replacement:="" type of situation. Right now I have 26 two line entries to take care of this, but I know it has to be easier and use less lines. (Trying to consolidate code for a better look).
Here is some of what I have (that works, but is long):
I need to find the total number of rows down to the next blank cell (and then perform a function based on that number).
I'm using:
CountA(A1,xlDown) Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.
I would like to use something like:
totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown")) If totalRows = 4 Then ActiveCell.Offset(1, 0).Range("A1").Select Selection.Cut ActiveCell.Offset(-1, 1).Range("A1").Select ActiveSheet.Paste etc.
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry A B C D E 1X 2X 3X 4 5X
Second Entry A B C D E 1XY 2XY 3XY 4Y 5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.