I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
Is there a way to find the first blank cell in a column using a formula?
View 9 Replies View RelatedI am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
Basically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I have this table, which can be seen as a basic custom gantt chart: KLRWo.png
And I would like to fill the A column with start dates, based on the first filled cell of the range on the same row, and the header value of its respective column (row 1). It's easier to show my expected result than write it actually:
WiMZH.png
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies View RelatedI have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View Relatedhow to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
I need to move data from columns B & C into A without losing current data in column A (see attachment). I'm sure I know how to do this but cannot for the life of me remember how.
View 5 Replies View RelatedI'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.
I am trying to create a macro that will find the next blank column in a specific worksheet, not just the active worksheet.
View 5 Replies View RelatedI have an Excel worksheet with two rows. Row one has months, row two has unit counts. I simply want a formula that will find the first (leftmost) date where a unit count occurs, returning the month of the first unit data point. I've seen several forum questions on how to search/ lookup the right-most non-blank/non-zero data point, however I would like the first, leftmost point. I have been unable to modify the forumula.
View 6 Replies View RelatedI need to write a conditional formula that will look up in a 2nd worksheet the last coloumn with data (note that there will be some coloumns in the row that will have data and some that will be blank, I need the last column for that specific row to be the return result)
View 9 Replies View RelatedSheet2 has columns with dates as headings. I add data under each date as appropriate. I would like a summary page for Sheet1 that contains only the most recent column data from Sheet2 (and other sheets, of course). For instance, if I have dates for columns A-E on Sheet2, but only A and B have data under them, I would like Sheet1 to contain the data in Sheet2!B, but not Sheet2!A because that is old data. Sheet1 will only contain the most recent data while sheets 2 through "n" will have historical data. Attached is an example of what I mean...
View 5 Replies View RelatedI am manually scrolling through Excel right now to find all blank cells in column L. Some cells have dates, others are blank. IF L is BLANK, I go to row K and copy/paste row K to row L. IF K is BLANK, I got to row I and copy/paste to row L.
Is there a statement I can put into row L to basically say "If blank copy/paste from row K. If row L and K are blank go to row I and copy/paste to L." ???
I want to find the Row Number, not necessarily the cell value, of the last non-blank entry in a Column.
If the address of this row is found, then that could also be useful. I believe there are some simple Excel functions to do this, maybe involving the X1Up feature. I've searched the threads and haven't found a clear answer this.
Below is code that I custom wrote, but its long and tiresome to use.
'The purpose of this sub is to find the last filled row in a column
'Knowing this last row is useful for telling later
' looping operations which row to stop on.
'The logic of this sub is that it will look down a column.........
I have two work sheets I'm using. Sheet1!A column contains a list of customer names like "Smith, John".
Sheet2!A contains the same list of name with additional information found in the row. For example, you will find "Smith, John" in Sheet2!A3 and John's phone number in Sheet2!B3
In Sheet1!B it to find the associated telephone number based on matching criteria from Sheet1!A and Sheet2!A
For example, Sheet2 has the following data.
[Code] ....
On Sheet1 I have the following names. You'll notice some of the names repeat.
[Code] ......
In column Sheet1!B I would like it to scan column A from sheet2 and display the data show in column B. So it would look like this-
[Code] ....
You'll notice some names repeat but it always displays the correct number from Sheet2.
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.
The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.
What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
Need a VBA macro that is similar to the subtotals function but without the subtotals? Basically I want the macro to look at column A and say, for each change in column A insert a blank row… I don’t need to worry about the sorting, I just would like to know how I can tell a spreadsheet to look at a column find changes in that column and just insert a blank row. On the second page of the attached spreadsheet is an example of the desired output… I will probably use this for many different spreadsheets so the simpler and more versatile the better, ie I can change the column I want the macro to look at.
View 3 Replies View RelatedIn table 1 you will see that not all rows contain data (this is because i have removed it previously with a macro) the second table shows what i want the macro to do but without deleting rows:
A
Hiddenrow with formula
B
C
[Code]....
So basically i would like a macro to search for the first none blank value in column A and copy the row to the first available blank row , it also needs to blank out that row once done. i.e row 3 would be moved up to row 2, 5 up to 3, 7 up to 4 etc etc.
The hidden rows contain formulas which cannot be deleted or my ws goes Pete Tongue.