Find Blank Cell And Compare...
Jun 29, 2009
I am trying to write a macro and i am having trouble hgetting it right. I have large amount of data in columns and what I would like to do is the following.
1. First I need to find the first blank cell in that row.
2. After finding the blank cell, I would like to compare the value in 3rd column from the blank cell( For example if the last blank cell is Row1,ColumnR then I need to Compare Row1,ColumnO) with Column E ( Is always Column E).
3. Based on above example if Row1,ColumnO>Row1,ColumnE, then goto next row else Row1,ColumnR value should be Row1,ColumnE and I would like to get Row1,ColumnS and Row1,ColumnT vaues to be same as last 2 columns from the blank cell which was determined first (i.e., from above example Row1,ColumnS and Row1,ColumnT vaues to be same as Row1,ColumnP and Row1,ColumnQ).
4.I would like to perform the above procedure for all the rows in the worksheet and the blank cell may be anywhere in the column for that particular row.
I don't know whetehr it is possible to write a macro to perform above procedure or i need to do that manually which i hate as i have large amount of data.
View 3 Replies
ADVERTISEMENT
Jun 25, 2013
I've a spreadsheet and I need to find cells in Column A that contains certain text and subsequently being able to compare the data in 2 other cells (column F and Column J) and post the results of comparison in Column L. Please see the tables below:
In this table, if Range("A1") contains abc, then data in Range("f1") would be compared against Range("J1"). If F1 = J1, then Range("L1") would say "ok" otherwise "needs to check" as in Rows 2.
Please note that the amount of data varies daily.
ColumnA
Column F
ColumnJ
Column L
abc
fff
fff
ok
abc
fff
ggg
needs to check
bbb
fff
fff
View 1 Replies
View Related
Mar 14, 2007
I have a column with random numbers of blank cells.
I have a method of looking up a particular number in this column, but I want to be able to display the number in the first cell that is above it, that contains a number.
Is there some way to use the first cell (that is not blank) above a given cell in a function?
How can I reference this cell?
The numbers in this column are not in order.
I am using this to find the first and last date that a particular group of shares were purchased.
View 10 Replies
View Related
Aug 26, 2007
I have a list of #'s starting from 1, and the next cell down adds 1 to that.. based on some other info, it will either add 1 or come out blank.. i want to be able to have cell A1 point out which is the last cell that has a number and is not blank.. does this make sense?
Here is the formula in this column..
In this sheet cell L284 has the same formula in it as cell L283, however because R283 is blank it also comes out blank...
Here is a copy of the sheet.. I want cell A1 to equal 282 in this example...
View 9 Replies
View Related
Jun 21, 2008
I am trying to find the last non blank cell in a row. I am using the following line of
RC = Range("IV" & AR).End(xlToLeft).Column
It does not quite work for me, because there are what appears to be blank cells in the row but there is a formula that is auto filled and returns a blank. Can this line of code be modified or is there a different line of code I can use.
View 10 Replies
View Related
Oct 24, 2008
I need to know the value (which is a date) of the first non-blank cell in a range in a row. I have found some array formulas, but they either return it for the whole row (which I don't want), or they return text (which I don't want), or they don't work at all.
The range is: B9:FL9. Some of the cells in this range are blank, some are "0", and some contain dates. I need to know the most recent (furthest left) cell that contains a date and what that date is.
View 9 Replies
View Related
Apr 28, 2008
I am trying to find the column number of the first non-blank cell in a range. But I need it as a formula, not a macro.
I have attached a example.
View 5 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Jan 23, 2010
I am try to write a bit of code which will find the non blank cells in column H (Range H4:H24) and when it finds a non blank cell make column C in that row the active cell and then run a macro. Once the macro as been run i would like it to look for the next non blank cell.
View 5 Replies
View Related
Sep 25, 2012
I have a row of dates with a variable number of nonblank cells between them. e.g.:
A1 1/9/12
B1 6/9/12
C1
D1 8/9/12
E1
F1
G1 12/9/12
I want to calculate the NETWORKDAYS between dates, but where there is a blank cell, I want to be able to use the date in the previous nonblank cell. For example, NETWORKDAYS(B1,D1), if cell C1 is blank or NETWORKDAYS(D1,G1), if cell F1 is blank.
how to get the value of the previous nonblank cell and nest it inside the NETWORKDAYS formula?
View 3 Replies
View Related
Jun 25, 2013
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
View 9 Replies
View Related
Jul 22, 2009
I had a macro to do this but forgot to save before close now i can't find it.
I need to find the next blank cell in range F15:F240 and select it so i can paste data there.
View 9 Replies
View Related
Jun 19, 2007
Is there a way to find the first blank cell in a column using a formula?
View 9 Replies
View Related
Oct 28, 2009
I have a row of 2900 single letter (middle initals) however 222 users have no middle inital. this is a password scheme and need 7 digits, without the middle inital i only have 6. so I want to replace all 222 cell that are blank with a dash can this be done without doing each by hand?
View 4 Replies
View Related
Mar 4, 2008
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12.
On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
View 9 Replies
View Related
Jul 15, 2009
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
View 8 Replies
View Related
Jun 23, 2009
If cells in column J are not blank, values in column K must be copied from column I.
If not, i.e. cells in column J are blank, values in column K must be copied from column I + the fixed value in cell $C$2.
Can't get "if" nor "notblank" formula working.
View 6 Replies
View Related
Nov 5, 2006
I need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
View 5 Replies
View Related
Jun 5, 2008
Basically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
View 7 Replies
View Related
Jan 17, 2014
I have this table, which can be seen as a basic custom gantt chart: KLRWo.png
And I would like to fill the A column with start dates, based on the first filled cell of the range on the same row, and the header value of its respective column (row 1). It's easier to show my expected result than write it actually:
WiMZH.png
View 6 Replies
View Related
Aug 28, 2012
I have a listing with Middle Initials in column D. D also contains dates and Names. I want to remove the Middle Initials only. I need to do this without moving around cells. So a Find:="A", Replacement:="" type of situation. Right now I have 26 two line entries to take care of this, but I know it has to be easier and use less lines. (Trying to consolidate code for a better look).
Here is some of what I have (that works, but is long):
Code:
'
' Replace Middle Initial from Prod Sheet
'
Cells.Replace What:="A", Replacement:="", LookAt:=xlWhole, SearchOrder _
:=xlByRows, MatchCase:=True, SearchFormat:=False, ReplaceFormat:=False
[Code]...
I thought that I might be able to do something like this, but I can't get it to work.
Code:
Dim Alpha as Variant
Alpha = Array("A", "B", "C", "D", "E", "F", "G", "H", "I", "J", "K", "L", "M", "N", "O", "P", "Q", "R", "S", "T", "U", "V", "W", "X", "Y", "Z")
For ABet = 1 to Cells(Rows.Count, "D").End(xlUP).Row
If Range(ABet) = Alpha Then Range(ABet) = ""
Next ABet
' or I thought maybe this would work.
Cells.Replace What:=("A", "L", "R", "M") Replacement:="", LookAt:=xlWhole, SearchOrder _ :=xlByRows, MatchCase:=True, SearchFormat:=False, ReplaceFormat:=False
' or I thought maybe this would work with the variables.
If Range("B" & ABet) = Alpha Then Range("A" & ABet) = "" None of them worked though.
View 2 Replies
View Related
Mar 14, 2007
I need to find the total number of rows down to the next blank cell (and then perform a function based on that number).
I'm using:
CountA(A1,xlDown)
Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.
I would like to use something like:
totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown"))
If totalRows = 4 Then
ActiveCell.Offset(1, 0).Range("A1").Select
Selection.Cut
ActiveCell.Offset(-1, 1).Range("A1").Select
ActiveSheet.Paste
etc.
View 9 Replies
View Related
Apr 20, 2006
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
View 4 Replies
View Related
May 30, 2008
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
View 9 Replies
View Related
Aug 14, 2013
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies
View Related
Oct 18, 2013
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
View 6 Replies
View Related
Jun 6, 2014
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies
View Related
Apr 4, 2008
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
View 4 Replies
View Related
Feb 28, 2012
I am looking to compare a range that contains the non blank cells and identify if the values are the same in the last 3 non blank cells in that range.
(in the range there could be as much as 12 non blank - but only compare the last 3)
View 1 Replies
View Related
Jan 22, 2010
I am trying to find out if the articles in column A exist in column C. if yes, return the value of the same cell in column D, if not, return "no Match".
I know for a fact that there are money articles in column A do exist in column C, but I see the "no match" in the corresponding cell. for example, manuallyfin this article in column A13622356, and manually find it in column C. it is there, but the Vlook up returned "no match" value
View 13 Replies
View Related
