Not sure if this is a simple question or not - is it possible to pass the contents of a userform textbox (which exceeds 255 characters ) to a worksheet cell? It seems to truncate when I try to do so.
Automatically format a textbox on a userform so that it puts a space immediately before the last 3 characters, regardless of how many characters are put in?
I have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale. The following two boxes are filled by a user: txtCost contain the Cost of an item (numbers) txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively.
The value for txtSale is generated on clicking the command button i.e. txtSale = (txtCost + (txtCost * txtRate)). Could you please help in writing a macro for calculating txtSale value.
Is there a way to check if an enrty to a textbox on a user form has any of the following / ? * [ ] ? if so then a msgbox tells the user they cant use any of those characters?
I want to automatically prevent users from entering more than two digits into a textbox.
i dont want to show a message box or anything like that. I want it to be physically imposible for them to enter more than two digits i.e. when they enter two digits, pressing any other keys on the keyboard should have no effect on the contents of the textbox.
it is a very simple marco. It contains a textbox input within a user form. The only problem I have is, when I use CRTL-V to paste some text into the textbox, it has a wired character attached to the end of the text.
for example, I highlighted an email address (ex. abc@abc.com) from an email, use CRTL-C to copy, and I make sure that there is no space after the .com, and after I pasted using CRTL-V to the textbox, a wired character, like a reversed P sign..... very much like the carriage return in MS Word, would anyone know how to avoid that or disable that extra character?
if there is a workaround to this issue. I have this code that transfers data to a textbox but it stops after hitting the character limit. Does anyone know how to extend this limit ?
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Cancel = True With Me.Shapes("textbox1").TextFrame.Characters .Text = .Text & Target.Value End With End Sub
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code: If isnull(me.comment.value) Then Exit Sub ElseIf me.comment.value = true Then me.comment_date.value = date me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";" me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change() If Me.cmbChooseLevel.Value = "Level 1" Then Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value End If End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB: Sub RenameTab() 'Renames the worksheet tab ActiveWorkbook.Sheets("VSVA-1 Data").Select tabName = TextBox1 ActiveWorkbook.Sheets("VSVA Data").Select Selection.Name = tabName End Sub
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
So we have people's names in a table. First name in one column and last name in another column. We have a 3rd column where we can use 8 characters to do a combination of First 5 of Last Name + first 3 of first name. However, if someone's last name is only 3 or 4 characters, we'd then want to take more from the first name to fill out the 8 characters.
So: Charles Johnson -> Johnscha John Smith -> Smithjoh Willian Wu -> Wuwillia
What's the best way to do that without creating some crazy formula with tons of if/thens?
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.