I need a macro to add the last 2 items in column G, if they are both positive or negative. If one of the values is either positive or negative, then they must be subtracted.
In the example below the formula in G45 = G43+G44
The data is imported so the range will allways change foe rg G45 must become G75, then the formula will be G73+G74 if they are either both postive or negative or if either one is positive and the other is negative then G73-G74 ....
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
I've created a dropdown list using "Data Validation" containing 5 items.
Each item in dropdown should run a macro when selected.
Should i use worksheet selection change event? or anything else.
I have 1 macro that i would like to be activated as soon as i select any item from a form control listbox (doesn't matter which item). i am not using an active X control but rather a form control.
View 5 Replies View RelatedFrom a macro, I am trying to activate the Excel dialgue that occurs when you click on a toolbar item.
Specifically I want the Find item (CTRL-F) to activate. I can use the .find method ok from a macro but I want the dialogue from Excel itself.
How do I select the first item in a listbox via code (userform).
Scenerio:
A user starts with listbox3 and makes a selection for a font type. If the font selected doesnt exist on there system (code already taken care of, true or false) I want to automatically set the font to the first item in listbox3 as a default value transparently so the user can continue.
know a macro code to add 3 columns after each different Item.on my spread sheet.
1ABCD
2Item
3111
4111
5111
6111
7111
8111
9112
10112
11112
[code]...
I am wondering if there is any code to SELECT (DESELECT) A MENU ITEM using VBA? I have an Excel Add-in program installed, which adds a Menu "Easycal" to my Excel menu bar. Under "Easycal" (drop down list), I have the following items:
Refresh workbook
Refresh worksheet
Turnoff Easycal
I am using "Easycal"'s functions in various cells of my sheet "Final". When I select "Refresh worksheet" from "Final", "Easycal" fetches (or calculates) me the data from the "Easycal" database. I have a macro (on "Final") that pulls together data from other sheets of the same workbook. I there anyway to include a code in my existing macro, so that when I run the macro, the following are completed in sequence:
1. Select "Turnoff Easycal" menu item
2. Run my existing macro (to pull the data from other sheets to "Final")
3. DeSelect "Turnoff Easycal" menu item
4. Select "Refresh worksheet" menu item
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View RelatedI created a drop down list (of various Input Groups) and I need to show the selected group's responsibilities on a separate sheet; is there an easy way to do this?
View 2 Replies View RelatedI manage an monthly inventory spreadsheet with over 100 various items in the master list. However in any single month there may be only 5 or 10 active items that need to be reported on. How do I develop a macro that will check the "items on hand" column and delete the entire row if the quantity is "0". My report is limited to showing only items on hand and not the entire list of items.
View 1 Replies View RelatedYou can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red).
On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
I created a macro that will do a subtotal and copy the value then undo the subtotal and delete all the values(i dont need the actual raw data, just need the subtotal). i noticed when i do a copy, i have to paste from the office clipboard. is there a macro i can use to paste from the first item on the list?
View 1 Replies View RelatedI have a normal data validation box on excel, but I want to be able to navigate my way through it using a macro. I can select & opent the drop down list with the following
SendKeys "%{DOWN}"
but then an action like
SendKeys "{UP}"
Does not navigate itself up the menu as a normal keystoke would. Any ideas on how to solve this? Basically, I want to select a cell, open the drop down menu, select the first choice in it (so thinking SendKeys "{HOME}{ENTER}" ) all using a macro.
I am looking for a macro that will combine qty's of item codes when first 6 out of 9 numbers in the item number match. Please see example of data below. In this case, the macro looking at the first 6 numbers in used and new. I should get a total of 26 - new and 45 -used.
A B C D E
Item Name yard Item Numb Inv New Inv Used
Frami panel 3x6 416-100 588801000 6 27
Frami panel 3x6 416-150 588801000 10
Frami Xlife 3x6 416-100 588801500 20 8
I am trying to accomplish is to display a dropdown or combobox with a list of choices. I want the backcolor to be shaded light green to match instructional text that appears in the cell above. That I have working with the selections appearing. Once a choice is made I want a separate procedure to run that will somehow know which choice was made.
I can't put the code within the module for this particular sheet as it is dynamically recreated each time the data is refreshed and the code will disappear. This may seem to be an odd practice but this is how 25+ workbooks are coded within this system for my employer's customer and it is a required practice.
I have a bunch of Option Buttons in a worksheet whose properties i need to change by running a macro. For example, I created an OptionButton1 in a worksheet using control toolbox. Now I want to run a macro to change it's name, groupname, linkedcell and caption. I did this macro but it doesn't work:
Sub Label()
Dim Code1 As String
Dim Link1 As String
Dim Form1 As String
Dim GroupName1 As String
Dim Caption1 As String
Worksheets("Section1").Select
Form1 = "OptionButton1"
Code1 = "FButton1"
Link1 = "FLink1" 'Defined in worksheet
GroupName1 = "FGroup1"
Caption1 = "Choose Function 1"
With Worksheets("Section1").Form1
.Name = Code1
.LinkedCell = Link1
.GroupName = GroupName1
.Caption = Caption1
End With
End Sub
I am having an issue with my macro code. Basically I am trying to filter a pivot table by selected criteria. The code seems to be correctly filtering the pivot table but the table appears with no data in it unless I manually refresh the table. This defeats the purpose of automating with a macro. I have attempted a "work around" of just refreshing the pivot table after the filtering is complete but that was unsuccessful. Here is the macro code:
Sub BigReportMacro()
Dim pt As PivotTable
Dim pi As PivotItem
Dim pf As PivotField
Dim E
Sheets("Pivots").Visible = True
Sheets("Pivots").Select
'Refreshing all the Pivot Tables
[Code] .....
I am trying to select something in VBA code in the Messages part of the ribbon and then Email Tags section of the outlook ribbon called Choose classification but not sure how to select this object. It is only available when you send a new email. I have been unable to paste a picture which would explain it better.
View 9 Replies View RelatedIs it possible to search a worksheet that may contain different number of rows (from day to day) and for every instance of a word like "HOLD" is found in column "C" to Color that intire Row Red and also Bold the Row as well?
View 9 Replies View RelatedI have an excel form with a command (submit) button that opens up Outlook when clicked. I am looking for a way to have this submit button disappear when the user selects a specific item in a drop down list to make sure they do not email the form when it is used for a promotion (Promotion would be selected in the drop down).
View 8 Replies View RelatedI want to send the value of selected item in texbox , the value format is change by combobox value ..and I want the value is fill on the next column of sheet ( see attached file please)
View 2 Replies View RelatedI am using a vlookup and have a problem. I am assigning a category to an item number based on the first two characters of the item number. For example item number 60123 would equal scrap because of the first two characters of 60. But the item number can begin with either a number or letter. Here is the formula I am using that works for item numbers that begin with numbers:
=VLOOKUP(VALUE(LEFT(E2,2)),Sheet3!A:B,2,FALSE)
It works fine until I reach a item number that begins with a letter, then I get the dreaded #Value error. If I take the value out of the formula then it works for the letter based number items but not for the number based item numbers.
Here I would like to get your valued guidance for the usage of "IF" formula. I am having two sheets one is new XL-1 and other is old XL-2. I want to have a item number from the old file corresponding to the same item descprition in the new file. I am attaching the snap shots of two files which is more explanatory than describing in words here.
View 2 Replies View RelatedI wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View RelatedI am using Vlookup to compare our item number with the suppliers item number but the result is removing the decimal point on some but not all items.I have included a small sample but it concerns almost 10.000 items.
View 9 Replies View Relatedhow I can, in a formulae, identify the last item(s) in a list of values. For example I have data in rows 1-25 with numeric data in. I want to put a formula in, say, row 100 that averages the last three data items above in the same column, but the number of data items will increase over time to use row 26, 27, etc. and I don't want to change the formula in row 100.
View 4 Replies View RelatedI am trying to find the std dev for each items below. I have tried to look for online tutorials but all tutorials I have seen only teach me to do a std dev for 1 set of item.
ItemQuantityC3C4D4A4B4A4B4C4C4B4B4A5D5C5D6B6C6D6B6A6D6A6D6B6C6D6C6D6D10B10A10B10C10D10A10D10A10C10C10D10B10
I have problem with filter more than 10,000 different item using Excel 2010, any other way to filter?
View 3 Replies View Related