Formats Specific Downloaded Data
Feb 24, 2009
I have a Macro that Formats specific data downloaded to an excel spreadsheet everyday and I have also got a macro that will 'Save As'.
I am trying to merge the 2 within Visual Basic but am unable to word it correctly and get it to run without errors...
Here is the end of the first Macro:
With Selection
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlBottom
.WrapText = False
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False..........
View 9 Replies
ADVERTISEMENT
Feb 15, 2010
I often download data from various web sites - this is data that is displayed on a web page in tabular format, and often consists of hundreds of lines. I typcally Select All, then Copy, then go to a blank spreadsheet and Paste. After a bit of reformatting, I'm usually in good shape. The problem is, that sometimes the contents of a cell might have been "5-2" (without the quotes), and it comes through on Excel as "May 2". Without proofing each cell, I can't just make the assumption that the original was "5-2" - it might have been "5-2-10" (but not a date).
The normal Paste Special options are not available when I do this, so I can't paste them in as values. I have tried formatting the worksheet at text prior to doing the copy but that does not work.
View 6 Replies
View Related
Sep 30, 2006
when i download the data to excel it is downloaded in some format i cannot use.
View 6 Replies
View Related
Jun 12, 2009
I am trying to use vlookup function with web query data and some of the data has embeded characters I can not see and vlookup does not work (can not match even though numbers appear to be the same). I have attached a test file with the data and formula and a detailed explanation.
Found this ....
View 8 Replies
View Related
Jun 14, 2013
I have a problem with text to columns with data downloaded from our website. The address field is coming through with the whole address in a single cell with multiple rows. I have tried the following but all I get is the first row in the first colimn and the rest of the data:
Text to Columns, Delimited, Other and ALT-0010
Text to Columns, Delimited, Other and ALT-010
Text to Columns, Delimited, Other and ctrl-j
I have even created a macro to replace the hard returns with commas and then use comma as a delimiter but that still does the same.
I have attached a file with two of the records (1 tab for the original data and one with the commas)
Finally, I have tried this in both 2003 & 2010 and get the same issue in both.
View 3 Replies
View Related
Jun 19, 2014
The government was just kind enough to send me some data I asked for in the form of a spreadsheet. Came in a Yahoo email. Document was blahblah.xls
I downloaded it.
Clicked and Excel opened it without any error messages.
What I see is one white bar in the spreadsheet section. It has three sections where you would have three columns.
On the left it says F279, which I take to be the cell address.
Then to the right of that there's a sort of elongated blue button with 'fx' written on it and a dot at the left end that I can use to grasp it and slide it left and right.
To the right of that it says 6169, which is the content of some cell.
Hover over a couple of these things and it says 'name box' and 'formula bar' at different times (sometimes I can't get it to do it.)
There's data there. I can't do it now but somehow the first time I opened it I was able to scroll one or the other column (i.e. one at a time only) up and down and see there was content there.
Is this thing fixable or should I get back to them and ask for a rerun? I would delete this is I could but it doesn't seem to offer that choice.
Did a 'print preview' and after that it came up in normal view. Well, nearly, it was down at the bottom of the screen but I was able to drag it up and now I've got it.
View 1 Replies
View Related
Nov 29, 2006
Report 1 is downloaded from SAP into Excel and Report 2 is downloaded from AS400 into Excel.
Report1 contain 3 columns as follows:
Column A - Invoice #
Column B - Invoice date
Column C - Invoice Amt
Report2 contain 5 columns as follows:
Column A - Invoice #
Column B - Ship Date
Column C - Check #
Column D - Amt Paid
Column E - Payment date
I tried to use the Vlookup function in Report 1 Column D to lookup the matching Invoice # in report 2 and bring in the corresponding Amt paid. It did not work and I assume that this is because of the formats in the downloaded files. I did try to change formats for the columns involved but this did not work. This function works fine if both files were setup in Excel, however in these downloaded files even though saved as excel workbooks, something prevents this function from working. I do know for a fact that the same invoice number does show up in both these files but the vlookup does not pull up the required Amt paid from Report 2.
View 9 Replies
View Related
Jun 10, 2008
Version: excel 2003
OS: Win XP
Currently using VBA do develop a tool for Excel. I've downloaded a .ocx control and am wondering how one would go about adding it to the toolbox?
View 3 Replies
View Related
Jun 27, 2013
I am not able to open any excel file which comes as attachment with mail.It shows the message "file is corrupt ".
However , once it is open from other computer, I can view the same in LAN system.
View 2 Replies
View Related
Jun 7, 2006
How do I convert a list of downloaded zipcodes that preceed with zeroes into 5 digits?
i.e.
501 into 00501
and
1601 into 01601
View 9 Replies
View Related
Jan 19, 2010
Is it possible to extract data (=lookup?) where one set of data is in a different format to the other? I've atttached a sheet showing how it looks.
View 4 Replies
View Related
Apr 24, 2014
I do have a 2 tabs with certain sets of data which I need to compare. I have one tab called "NEW" and another one with "PREVIOUS" and unique values in column C in each of them.
I now look for a formular / macro which tries to find the value in cell C2 of the "NEW" tab in the "PREVIOUS" tab. In case there is a match, the cells of columns T to W (of the row where the value was found) should be copied from the "PREVIOUS" tab into the "NEW" tab just to the same place. When there is no success, "NEW PD" should be entered into cell T (of the respective row).
The lists are growing week by week. I can do an offset / match function which will import the plain data, but I cannot get the formats, too. I believe I will need a macro for that but I am too unexperienced to get this to work on my own.
View 3 Replies
View Related
Jun 15, 2012
I have lists of products that I want to sort, but all the skus are in different formats, some letter, numbers, spaces, symbols and mixes of all.
Example:
01107919
CE-4128B9
RED-BRIC889
1124
14100119020-E
86TR
ECO CUP22OZ/1000
1418909888783301
I would like to organize them by the order of the numbers, letters and symbols, not the value of the numbers.
Example:
01107919
1124
14100119020-E
1418909888783301
86TR
CE-4128B9
ECO CUP22OZ/1000
RED-BRIC889
I have tried formatting and different sorting options but there's a dent in the wall and my forehead is getting bruised from all of the banging.
View 2 Replies
View Related
Sep 4, 2013
I have a table showing data for 10 teams. There are however 10 different measures which are pulled from a seperate sheet using a dropdown box to select the measure.
One of the measures is example 390823 which needs to be format 390,823 so that thousands are shown, and other formats are, example, 89.9 which need to be 89.9%.
Ive gone to my other sheet and all the raw data is showing correctly with % and ,s. But my dashboard table can only have one format. How do i make it so that each measure pulls in the correct format when selected, without dragging the whole area and changing each time?
View 1 Replies
View Related
Jun 27, 2006
I am trying to populate a listbox with data that is of varied formats and I can't seem to do it! I can get the data into the listbox but not change the formats. I have attahed a worksheet to show the problem. Basically, column 2 of the listbox I want to be in hh:mm:ss.0 format and column 4 I want to be in dd-mm-yy. The strange thing is that the listbox does seem to take into account some formating as column 4 is in mm-dd-yy format already but column 2 is just a number.
View 4 Replies
View Related
Feb 15, 2008
I often find that it would be useful to have a data type for geographic coordinates (i.e. latitudes and longitudes) that would e.g. permit/facilitate formatting negative values as South and West, direct subtraction of one latitude/longitude from another, conversion of degrees-minutes-seconds to decimal degrees, properly formatted axis labels when using Excel to draw maps (at the moment, I am editing the axis labels in the PostScript file by hand, when I don't use chart labeller to paste axis labels in) and so on.
(Time formats could be used, if only they could be prevented from converting hours over 24 to days, which I have not found out how to do.)
Therefore: does anyone know of any Add-In out there somewhere that could supply the lack of a geographic coordinate data type?
View 8 Replies
View Related
Oct 2, 2013
I had a macro on my previous laptop that worked, but didn't have the macro backed up so it was lost.
I need a vba macro that will copy all active/selected worksheets into a new workbook. Included requirements:
* Maintain tab names
* Only bring in contents/data with all formats (including logo image, but NOT formulas or hidden rows/columns)
* Keep the file name the same except adding "- FINAL" to the end
View 3 Replies
View Related
Dec 2, 2008
The macro firstly formats the data that is pasted into it from an access database, then it does some calculations to determine when 10 working days from a specific date is, and when 20 working days from the date is (these go in new columns at the end of the data). The macro will also add new columns which say "Not resolved" if there is no date in the Resolution column, "Yes" in the "10 working days met?" column if the condition is met and the same for 20 workings days in a different column. As the colouring etc takes a long time I really wanted to add as conditional formatting to the macro!
how to attach a spreadsheet here then I can show you what the outcome we want is. A point to note is that there is not a set number of rows each time we do this, and I don't just want 1 cell to be coloured - I want to specify which cells in the row are coloured depending on the results in another cell on that row.
View 2 Replies
View Related
Jan 16, 2008
See attached file. A colleague is downloading rows of data from a website which contains a number field Excel is currently treating as Text after being pasted in. My spreadsheet includes just a sample of the many rows of data however as you can see the VALUE function refuses to convert these text values to numbers. How these might be converted and why the VALUE function refuses to work in this case?
View 5 Replies
View Related
Mar 27, 2013
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
View 9 Replies
View Related
Jun 14, 2013
I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken
Cow
Donkey
Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
View 3 Replies
View Related
Jan 29, 2013
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
View 1 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
Mar 8, 2014
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
View 1 Replies
View Related
May 12, 2012
I have two separate worksheets:
I'm trying to find a formula that looks at Column A on both sheets (each client is allocated a unique number) and if they match enter in column D of the referral sheet the month they were seen but only if it is a 1st contact (appt type on column D of contact sheet)
Referral
A
B
C
[Code]....
way to do the calculation using Excel 2003
View 9 Replies
View Related
Nov 25, 2009
I have a macro that first refreshes a specific data range that imports data from a text file as such:
View 2 Replies
View Related
Nov 1, 2011
I have a combination chart with data from Sun thru Sat (7 days). My manager wants to display only the weekday data (M,T,W,Th,F) and remove the weekend data (Sat,Sun). However, I also need this data to be included in other charts I need. I was thinking in years past, that I was able to remove specific data from the chart directly without having to alter or change the spreadsheet data? I have copied a second set of data and hid the weekend data, however, I have gaps in the data, which I need to remove in the chart display. Not sure what to do, or the best avenue?
View 2 Replies
View Related
Apr 2, 2008
I have a worksheet named newvehicles with data in columns N to T. I have the branch names in column S.
I need VBA code that will copy all the branch names that are the same as well as their corresponding data i.e the data in columns N to T into a new worksheet with the same name as the branch being copied for eg if column S contains BR1, BR2, BR3, BR4, BR5 etc, then I need all the data for BR1, BR2 etc to be copied into a worksheet Br1, Br2 etc
The values are in columns P:R ("newvehicles"). I need these values to be added using VBA code as soon as this data has been copied accross. When pasted into the new worksheets, it can then be from the first column onwards
View 9 Replies
View Related
Aug 13, 2005
This error occcurs when i add some worksheets to a workbook from another
one. I am not completely sure (cos this is not my work actually) but it
seems to me that there is not really too much (about 4000?) "different" cell
formats in the workbook, but there is a quite lot amount of drawing objects
(grouped technical drwaings plus autocad objects which i also converted them
to bitmaps to overcome the error).
I also dont understand the restriction:
If i have 3999 cells formatted "bold" and another 2 formatted "underlined"
this should not count 4001. True?
My workbook has about 15 worksheets with each fits to 2 printing pages.
View 13 Replies
View Related
Feb 12, 2009
I have a spreadsheet with a number of columns. In column D there are the following options: 2,3,4,C,T. I want to color the cell if there is data in the cell and column D contains a value.
So for cell L17, my conditional format I have =AND(D17=2,L17<>"") - - (RED), =AND(D17=3,L17<>"") - - (YELLOW), =AND(D17=4,L17<>"") - - (GREEN).
I need to color for values of C and T: but there are only 3 conditional formats permitted. Is there any way around this?
View 14 Replies
View Related
