Keep Formula When New Row Is Inserted?
Jun 16, 2014I have a formula in Sheet1 column H that I need to appear in the cells when the button is clicked (the button inserts a new row).
View 1 RepliesI have a formula in Sheet1 column H that I need to appear in the cells when the button is clicked (the button inserts a new row).
View 1 RepliesHere attached is my sample workbook:
Attachment 310920
My button inserts a new row into the table.
What I want is that everytime a new blank row is created, the formula in the Days in Situ column is there as well (but obviously the cells update depending with which ever row it's in.. eg below formula is row 10.).
I am trying to write formula in a cell using vba code, but i m not getting the expected one.
[Code]......
In the above code, i m trying to insert the formula where it fetches the address of a cell using some variables.
Here r = 1, c = 1 and resOffSet = 7
From the above code im expecting cell adress like A1 , B1 etc but i am seeing "0" in the cell value.
I have some columns with formulas in it. at the end of the column (used range) i have a row with total values of individual columns. However, Whenver, I insert a new line, then the formula of that particular column is not applied to the new rows inserted. does any one know why? If it is not set automatically, How do i enable it do be done?
View 9 Replies View RelatedIn my "example" I have references in Summary!D23:E32 which take data from Input!B36:U36. Is it possible to automatically update these formulae if a row is inserted eg above my row 37? The formula in D23 should then change from =OFFSET(B37,-1,0) to =OFFSET(B38,-1,0) and so on. I would like this to occur wherever I insert a row.
I am using this code, but it inserts rows consecutively from the top only.
Sub InsertVolRow()
Dim iRow As Long, iColumn As Long
On Error Goto Exit_Error
iRow = Application.WorksheetFunction.Match(" Total", Range("A:A"), 0)
Rows(iRow).Select
Selection.Insert Shift:=xlDown
iColumn = Application.WorksheetFunction.Match("Total", Range("2:2"), 0)
Cells(iRow - 1, 1).Select
Selection.AutoFill Destination:=Range(Cells(iRow - 1, 1), Cells(iRow, 1)),
I've applied a basic multiplication formula =D12*E12 in a table Column F, also I've filled it throughout but now if new rows are inserted in between or at the end of the table, new cells in this columns doesn't include this formula.
View 1 Replies View RelatedI'm trying to wrap my head around this. I have in a formula in one sheet pointing to a cell in another. Once I insert a row the formula adjusts. I need them to remain static.
I have tried searching, however I'm not 100% on the terminology.I have tried the F4 shortcut and put the $ signs in, however they still change.
I have this formula
=IF('Senate 1'!K10="",'Senate 1'!K$8,IF(S10>'Senate 1'!K10,S10,""))
what am hoping i can get it to perform is have S10 replace it self each time a greater value is inserted in Cell S10.
I send these kind of mails to intimate people about upcoming meeting, the format I prepare in Excel 2013 and paste it in Outlook 2013 (as a table, not as an image)
Now one of the columns I put as 'Days Remaining' which basically tells the users how many days are there to the review, the image below will show how it looks:
Now the numbers of days remaining will be correct the day I send the mail, but when somebody opens the mail at a later date, it would not sort of show the true number.
Is there a way to auto-update this number inside the Outlook mail, as it works in an Excel Sheet?
Below is some code I am trying to complete but ot does not ALL work.
I am inserting a row and I want the row to be highlighted.
The insert part is working ok but not the highlight part.
[Code].....
I'm trying to write a code (and I have little to no knowledge of VBA!) so that when a line is inserted onto any worksheet in the workbook a msgbox appears....
Trying to get it myself I created this- it's probably COMPLETELY wrong, like I've mentioned I have little to no knowledge and just using websites/other codes I've seen to put this together... o.O
I wrote a code that when a change is made to a sheet the "=today()" formula is inserted to cell A for that row. My problem is that my spreadsheet keeps freezing whenever I insert a new row. Is there a code to stop running the code if a new row is inserted? Below is the only thing I have so far.
Private Sub Worksheet_Change(ByVal Target As Range)
Application. ScreenUpdating = False
With Cells(Target.Row, 1)
.Value = "=today()"
End With
End Sub
I have imported and deleted several pictures into my worksheet. I want to re- name or re-order my pictures. Right now, a new pictures is name "picture 4" when there might only be two pictures in the sheet. I want to rename to say "picture 2" as I have a macro that calls for "picture 2" I know this should be simple, but I don't know how to do this.
View 4 Replies View Related[URL]
I got the code in the above link working for me, but how would I restrict it to a certain subset of Rows? It's overwriting headers and totals and other things I don't want to change in the worksheet.
I have some code that sits behind the worksheet_change event that recognises that I have just inserted a row into the active worksheet and it is happily telling me that I inserted one row.
What I also need is the actual row number that I just inserted but I cannot seem to find the right syntax to return the value I need
how can i run a macro after a comment is inserted?
View 6 Replies View RelatedI would like to atribute a property (like colour) to any new row inserted in the spreadsheet. I'm struggling to find the correct way to reference a all inserted rows.
View 2 Replies View RelatedI have a worksheet that I have to sum in one cell and count in another cell from A1:until it hits a blank cell. The thing is, I insert the blank row (only 1) in different places depending on the new data and where the cut off is. How do I do a sum formula from cell A1...until I hit a blank and a Count formula in cell B1: until I hit a blank cell?
When I insert a row in my table (below the headers, which are between rows 1 and 4), I want the formulas from the above row (or below row) to be copied down to my newly inserted row. I say "below row" as well in case I want to insert a new first row and want the formulas in the row underneath to be copied up.
e.g., formulas currently in the first row are:
Column A: =SUBTOTAL(3, $B$5:B5)
Column H: =IF((F5="N*"),(1),"")
Column I: =IF(((SUM(H$4:$H5))=(SUM(H3:$H$4))),"",(SUM(H$4:$H5)))
Column J: =I5
Any other values in the other columns should not be copied to the new row.
I also do not want my table to be scrambled if I should delete any particular row.
I am trying to insert an image into a worksheet with no avail. Whenever I choose INSERT/ PICTURE/ FROM FILE and select the file, it doesn't show up. I moved the entire sheet to another workbook and it all my attempts showed up there. What is stopping me from inserting a picture from file? Also, inserting AutoShapes is completely greyed out (disabled)...
View 3 Replies View RelatedI want the 2 graphs in "Graph" worksheet to change automatically when a row is inserted in "Data" worksheet . Every time i have to change the graph manually to contain the latest 20 days value. I want some offset or something which can be put in the range provided below to do the work.
Chart Data Range =Data!$A$1:$A$22,Data!$F$1:$F$2,Data!$L$1:$L$20
Legend entries (Series) - Series Name =Data!$F$1 ( this will remain constant everyday as this is a header field)
Series Values =Data!$F$2:$F$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$F$3:$F$23)
Legend entries (Series) - Series Name =Data!$L$1 ( this will remain constant everyday as this is a header field)
Series Values =Data!$L$2:$L$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$L$3:$L$23)
Horizontal (Category) axis series -Axis Label Range =Data!$A$2:$A$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$A$3:$A$23)
Sheet attached : Devicess.xlsx
When I run module 2 one of the first things it does is export the sheet to a .pdf - however sometimes when i am ready to tun this macro there are pictures inserted as signatures (some of my team dont have touch screens) - but when they run the macro and the .pdf file is created the inserted pictures are there. See the below code - the "bold" line is the line that i feel needs to be more specific...
this is the Macro code
[Code] ....
I am having no luck with trying to find a VBA code that will auto set my page break around an image I inserted. Is there a way to do this even? Furthermore, there is a possibility of inserting multiple images in which I would need each image put on a different page and have the macro set the page break around each image. So if I inserted two images then I would need the macro to set two pages and break each page around the image size?
View 1 Replies View RelatedMy code is:
Code:
Sub Insertwinds1()
ppath = "winds.webimage.url"
With ActiveSheet.pictures.insert(ppath)
.left = Range("A2").left
.top = Range("A2").top
.ShapeRange.PictureFormat.CropRight = 70
.ShapeRange.PictureFormat.Cropleft = 130
.ShapeRange.PictureFormat.CropTop = 300
.ShapeRange.PictureFormat.CropBottom = 90
End With
End Sub
This takes the image from the web (which is fairly large), moves it to Cell A2, and then Crops out the extra space I don't need showing. When this Macro is finished, due to the large Crop size, the image is in the center of the screen and nowwhere near the A2 cell. Is there a simple addition I can add to this code to move it back to a specific cell (a2) after it's been cropped? or move it via placement on the sheet (13, 13, 600, 600)? My old code I was using for this was:
Code:
Dim MYPICTURE As Shape
Set MYPICTURE = Activesheet.shapes.addshape(msoshaperectange, 13, 13, 600, 600)
MyPICTURE.fill.userpicture "winds.webimage.url"
End Sub
This one inserted the image, placed it in the specific spot... but I can't get that one to crop it, which is why I started over with teh first code.
I have a formula in column G of a worksheet, however when a new row is inserted within the formula range, the formula does not continue in the new row.
Is it possible to make excel continue the formula without having to drag the formula down again?
I wanted the title to be " Dynamic Row And Column Index In Macro" but I wasn't allowed to write it so. However, I have macros where I write things like:
.Cells(138, 13).Value = Something
Now, if I add rows and/or columns in the worksheet, (138, 13) might not be the coorect coordinates anymore.
I've a spreadsheet with each row representing a record of some equipment installation escept for Row #1, which contains the column headers. For each record, Columns A through G contain the installation information,Columns H onwards are for monthly billing purposes(March 07, April 07, etc.). Each cell in Column H onwards contains a complicated formula for billing. Under the row that represents the last installation, there is a Totals Row. Since we are adding installations very frequently at the moment, my goal is to: Using a Worksheet_Change Event,
When a row is inserted into the worksheet, the code tests for
1) If the event is an "Insertion"-if not, Exit the code.
2) If the Target is a row- if not, Exit the code.
3) The row number-if row #2, copy the formulas from the row below.
If the row # is less than 2, Exit the code.
4) If the Target Range's row number is > 2, copy the formulas from row above.
5) If the Target Range's row number is => than that of the "Totals", Exit the code.
I've got 2,3 and 4-
How can I test for #1, and for #5, every time a row is inserted, the row # increases. How can I code #5?
I am having some troubles inserting an image than centering it within the cell.
When I do this:
Set rng = Target.Cells
With pic
.Height = rng.Height
.Width = rng.Width
.Left = rng.Left
.Top = rng.Top
End With
The picture fits within the borders of the cell, but when I do this:
Set rng = Target.Cells
With pic
.Height = rng.Height /2
.Width = rng.Width /2
.Left = rng.Left /2
.Top = rng.Top /2
End With
The picture is the right size but not within the cell.
Basic run down of spreedsheet. 2 diffrent sheets formated like a calendar. sheet one is to track minutes tardy for employees at work. Work sheet 2 is to document any weather or other issue that might arive to cause and employee to be tardy.
I have condintional formating set up to change the cells a diffrent color (on sheet 1) if the same day is flagged on sheet 2 as a exceptionalable day. What i want -
When i flag a day as a weather issue or other exceptionalable issue on sheet 2 i place a inserted comment with an explantion. I want this comment to auto transfer to the corrisponding cell in sheet 1 when i place it on sheet 2. I'm not sure if this is possible with Excel 03 but thought i'd ask.
I solved my problem by going to the multi-coloured MS Office Button, top left corner of the screen, then selected Excel Options there, clicked on Advanced, & deselected the 2nd from top "AUTOMATICALLY INSERT A DECIMAL POINT" ... AT 2 PLACES.
View 1 Replies View Related