Formula For Lookup And Count Function In New Updates
Nov 11, 2008
Having trouble getting a formula to work that will lookup a site number and count the number of times the site has a particular type of visit. For instance:
Site # Visit
1001 Active
1001 Active
1001 Discont.
1001 Screen Fail
1001 Active
1002 Discont.
1002 Active
1002 Screen Fail
1002 Active
I want a formula that will return the number of active instances for each site, like:
Site # # of Active Visits
1001 3
1002 2
View 2 Replies
ADVERTISEMENT
Nov 12, 2009
I am creating a spreadsheet to keep track of money and grouping them into categories. I have a column to group a purchase into a category (column E) and the amount spent in column F. I want column T to add up all of the purchase that were made according to the category in Column E.
View 2 Replies
View Related
Jun 22, 2009
I need to add the total of staffs hours worked for one day, but the problem is that I don't recieve the data as hours but as symbols(letters of the alphabet) representing time worked. Eg "A" is 3.5 hours, "B" is 4hours "C" is 4.5 hours ect, ect.
In the example the top table is a one month time sheet for each staff and there working shifts. The bottom table is the part that I need a formula for. I need a total for each symbol for each day so I can total the hours at the bottom where it says total hours. I have given an example on how the bottom table should look when the formula is completed.
View 2 Replies
View Related
Nov 9, 2009
=SUMIF('[Weekly Sheets.xlsx]W1'!$A$8:$A$10000,$C$1,'[Weekly Sheets.xlsx]W1'!$K$8:$K$10000). It works fine but I need it to also lookup cell B8 if B8 has text named "ABS" dont count whats in cell K8
View 2 Replies
View Related
Nov 10, 2008
I am currently using the following formula:
=SUMPRODUCT(('Step 1_Data_Current Qtr'!T2:T10000=B2)*('Step 1_Data_Current Qtr'!C2:C10000<>"")*1)
...to count the number of instances in a data set where:
T2:T10000=B2 is counting records where the value in the cell is set to B2
and
C2:C10000<>"" is counting records where the value in the cell is not blank.
The current formular is working, but I want to change the formula so that the values in C2:C10000 is looking up specific names (in this case, physicians) and not just where the field is not blank. How can I change to lookup physicians in a specific list that may change, located in a separate tab from the main data set?
View 11 Replies
View Related
Jun 25, 2008
My issue is it automatically updates.
I have 4 collumns:
Location//S-1//CSM//SCO
I want to enter in the location in a drop down list, which I know how to do. The thing I'm trying to do is when the Location says To S-1 for example, the date that it is changed "To S-1" the collumn under S-1 will post the date. When location changes to CSM, it will put that day in that collumn, etc.
My issue is that if I use the NOW() or TODAY() function in an IF() then it will update evertime I reopen the file. So the dates won't stay fixed. So if I change the Location to S-1 on the 12th, open it again on the 13th... it will say the 13th not the 12th.
View 9 Replies
View Related
Dec 11, 2007
I consider myself a beginning intermediate Excel user and am really learning a lot through this forum but have not run accross the answer to what I'm trying to achieve. I would like to return the value in the "Temp" column that meets all the conditions of the columns "letter", "day", and "time." Specifically, the "Temp" of "A", "Weekday", "East." I have attached a small spreadsheet. It seems Vlookup is the approach to use in combination with multiple if conditions or an array. But I am not yet comfortable with such a complex equation. Can someone provide me with some guidance or an equation that would work. So far this is how I've been learning. Looking at equations and deciphering how they are written.
View 5 Replies
View Related
May 14, 2008
This formula works on 1 sheet but we are unable to make it work looking across multiple worksheets? Looking for a match to A3 in column G and wanting to pull the info from column E in the same row.
=IF('2'!G3:G271=A3, LOOKUP(A3,'2'!G3:G271,'2'!E3:E271),0)
View 8 Replies
View Related
Jul 4, 2013
I have a formula in one of my sheets that updates each time a new value is entered...
=INDEX('HR Reports Marco New'!BI:BI,COUNTA('HR Reports Marco New'!BI:BI),1)
The issue I'm having is that Column "BI" has an =SUM formula already in it and the formula above is going to the last value which is 0 but all the way to the end of the year when we are only in July...
View 4 Replies
View Related
Aug 21, 2014
I am trying to replicate a payslip from a list of data on a worksheet.
The list of data contains the employee name, location they worked, and number of hours.
Each employee will work at multiple locations throughout the month, perhaps 10 or so.
The payslip must contain each location worked along with the relevant data, in a list so to speak.
What function can I use to pull this in? Of course if it were one location I would use vlookups to pull in data. As this only returns the top match I would then need a different formula to pull in the second location in the cell underneath?
View 6 Replies
View Related
Oct 4, 2009
I have a range of cells that may contain several different abbreviations (text groups). I have used the COUNTIF function with * place in front of text to count cells that contain the listed text eg =(COUNTIF(G6:G39,"*HWD")) which has worked well and returns an accurate count of the cells that contain HWD. I have tried to do the same thing for a COUNT function that contains an IF function and no count is returned. When I remove the * from the formula a count is returned for cells that contain only the HWD text and not cells that contain HWD and other text. {=COUNT(IF(P9:P69="MCAW",IF(G9:G69="HWD",J9:J69)))}.
View 3 Replies
View Related
Nov 13, 2008
a vb macro which checks whether a cell is blank or not? if yes then r1c1 formula = now() if NO gives a pop up message you can not input the time here.
View 10 Replies
View Related
Jul 1, 2014
I have data in table which look like this
A
B
1
NAME
AV
2
SONA
18
[Code] .........
I Want a formula that will enable excel to give me the number of students with Av.
>= 18
>= 15 but not > than 18
>= 10 but not > 15
View 1 Replies
View Related
Aug 9, 2014
I am trying to create a formula that will count days since an incident. Column A will have each day of the year in it Column 2, I would like to have 0 in it for each day In the event of an incident, I will replace the 0 with a 1 - but this should only happen on the date, rather than be maintained daily, if you take my point. I would like it to return a value based on todays date, counting the days in between today, and the last 1 entered. It is to cover the whole year.
View 5 Replies
View Related
Feb 23, 2014
I have the following list
Column A Column B
Name of Parts Amount
A 4500
B 5500
C 8000
D 12000
E 4300
F 28000
G 1000
H 7000
I 10000
J 5000
K 11000
Total No. 11
I want the result as follow.
Slab No. of Counts
0 to 5000 4
5001 to 10000 4
10001 and Above 3
Total 11
View 3 Replies
View Related
Mar 7, 2014
We have one excel file for monitoring of action items generated by the management after the study. As since there were around 3000+ rows has been generated since in the beginning of 1990's till to-date. So I was thinking of instead of getting the result through filter manually, I want to create a formula that will count of how many has been closed this year and this month out of the total numbers of action items.
Is it possible to use the COUNTIF function formula to count the number of items in column A, and date of column B, and closed in column C.
In below, we can see that there were 4 items under Revalidation has been closed this month and the total number of closed this year is 6.
TYPE
MTD Closing Date
Status[code]......
View 9 Replies
View Related
Jun 4, 2013
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
View 9 Replies
View Related
Jun 1, 2007
I am trying to use the DCOUNT function to count based on two different criteria in adjacent columns is this applicable.
Situation:
I have column B that contains initials and I have column C that contains a type (of store) so it'd look like this
jp RET
jp RTO
jb RET
ma RTO
Rn CI
ma Fur
tc CI
ma RET
jp RET
and I want to have a count of how many RET's there are for Initials JP ect
View 6 Replies
View Related
Jan 2, 2009
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
View 7 Replies
View Related
Jun 12, 2009
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies
View Related
Jul 29, 2008
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies
View Related
Apr 18, 2008
Is it possible to set up a lookup function with two lookup values? For example, say I have a list of items such as:
1 A 14
1 B 22
2 C 84
4 D 25
I'd like to have the lookup go to the above table and find the number 1 and the letter B and return 22. I can't seem to visualize how to make this work.
View 9 Replies
View Related
Jun 22, 2009
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
View 2 Replies
View Related
Jul 18, 2007
I am trying to count data using several criteria
1.Need to add data from for a certain category, say "blue" + data during a certain date but exclue the ones with zeros
My formula using arrays look like this, but it is still counting data with zero in the cell as an item
=count(if(A4:A400(text by category)=”blue”,count(if(O4:O400(date)<”04/01/07”,count(An4:An400)[Actual data],-(countif(An4:An400,0))))))
View 9 Replies
View Related
Apr 1, 2009
Im trying to return the number value of how many contracts have been signed in a particular month. So in my example I want to look pick out say "IM" and check to see how many of those types have been signed in say "Jan-09" and return that as a number. Have tried various mixes of count, sum, countif and sumif but dont seem to be getting anywhere.
View 4 Replies
View Related
Mar 19, 2014
I'm trying to extract the number of times specific keywords are used in Sheet1 and display that number on Sheet2.
For example:
Keywords to be used
ni = not interested
appt = appointment
na = not available
If ni is used 10 times, appt is uesd 2 times and na used 6 times.
I want to be able to see those numbers on Sheet2 next to the keywords.
e.g;
ni = 10
appt = 2
na = 6
View 2 Replies
View Related
Nov 12, 2008
I have 3 Sheets named Paid, Rejected, and Reprocessed.
On the Paid and Rejected sheets I have 2 fields Customer # (Column A), and Amount (Column Q). (The customer # field has many duplicates but the amounts are never duplicates)
On the Reprocessed sheet I have all the rejected items (all fields) and also a field named Reprocessed. I need to use a formula that will check the Paid sheet for any items that have the same Customer # and Amount and return the amount
There are 8,216 rejected items and 45,047 paid items. Some items were originally rejected have been reprocessed and show under paid.
Any thoughts on which formula I should use?
View 10 Replies
View Related
Jan 20, 2008
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
View 9 Replies
View Related
Aug 21, 2006
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies
View Related
Feb 3, 2009
Can I get all the information from Employee & Benefits tab to populate in the 401K worksheet. All information is on these two sheets except status, plan entry date, and 2009 compensation.
True under Employees tab means that a person is still active and I would like for that date to populate the 'Hire Date' column; whereas, 'False' represents a person is termed and I would like for the false date to populate under termed. Can you use the social security number if its a V Lookup because I have thousands of rows and multiple people with the same last name.
View 5 Replies
View Related
