I need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.
The cells datatypes are mixed, some are Integer and some are String.
Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.
I need to come up with a formula to verify that the last 3 characters of a text string match the 3 characters in the adjacent cell. So I am comparing in the example below Column B to Column A.
Ex:
A1 010 B1 3.010
A2 010 B2 1A.010
My spreadsheet is very large and I need to get this done without manually having to look at each.
I have a spreadsheet where I want to filter out a row if the entire row has zeros across all the columns. I cannot just use a Sum() formula because some of the numbers are negative and there is a chance it could zero the sum out.
Currently to do this I am using the following to tell if there are values in each of my rows:
Code:
ABS(K3)+ABS(T3)+ABS(U3)+ABS(V3)+ABS(W3)+ABS(Z3)+ABS(AC3)+ABS(AF3)
Is there any way to write a formula where I don't have to keep adding to the formula when I add another column?
I've normally just dynamically selected a range using the xldown feature but because this row contains formula it goes always down to the bottom of the formula instead of the last cell which isn't blank.
How would i go about generating this dynamic range that stops at the first cell that contains no value (but has a formula)? Perhaps a do while loop which looped down until it hit the first blank and then assigned the cells it had looped through as the range?
I am try to get the following VBA macro to work; however, I keep getting hung up on errors regarding the formula I am trying to input. It is getting hung up on the apostrophes and dollar signs. I am fairly new to VBA so I am lost when it come to converting my sheet formulas to VBA.
Code:
With ActiveSheet.UsedRange.SpecialCells(xlCellTypeBlanks)
.Formula = "=RAND()*0+VLOOKUP(INDIRECT(ADDRESS(1,COLUMN(),3),TRUE),INDIRECT("'"&TEXT(INDIRECT("$A"&ROW(),TRUE),"DD-MMM-YYYY")&" Inv'!"&"$J:$K",TRUE),2,FALSE)"
.Value = .Value
End With
I have column g as a dollar amount, and a running total in column h, where g4+h3=h4. I want the cells in h to appear blank until there is a dollar amount entered into the corresponding g cell.
View 10 Replies View RelatedI am looking for a formula that will work with my current formula, and check that cells a1 and b1 contains information. If they do contain info then the original formula should carry on as usual and leave the answer in cell c1. I also need it so when no information has been entered in cells A1 and B1, C1 will be blank instead of containing a zero.
This is the formula I have at the moment:
=IF(SUM(A1=0,B1>0),B1-A1,"No Charge?")
A B C
10.1810.82
See attached spreadsheet for example of the sheet I am using.
Problem 1.
Columns C and D show me figures when the number in col A is > 2500 or < 550 when these criteria are not met a 0 is displayed in the cell, is it possible to alter my formula so that nothing (a blank cell) is displayed rather than a 0 - I am wondering if there is something like null which I can use?
=IF(A4>2500,A4,)
=IF(A4<550,A4,)
Problem 2.
In column E (normal days) I want to display the value of A if it is > 550 but < 2500 - is there a way of doing this in a single formula? Again I would just like a blank to be displayed if the value of A does not meet the above criteria.
I want to make all the cells that are outputted as blank by my formula a certain color to distinguish them from non blank cells. my current formula: [B1=IF(A1=0,"",A1)]. my guess would be to use an [AND] function but I do not know how to command a cell to change color without using the toolbar.
View 4 Replies View RelatedI want my formula to output a blank cell if the answer is 0. Ex. [B1=IF(A1=0, ???, A1)]. I want B1 = A1 if A1 is not 0. I want B1 to output a blank cell if A1 = 0.
View 3 Replies View RelatedI'm trying to scan a column of data, example column H, for empty cells, if it's empty then skip it. This doesn't work, because cell.Value = " ":
If cell.Value 0 Then
'Extra coding
Else
End If
[URL]...
View 1 Replies View RelatedDoes excel have a formula to check to see if every row in a specific column is blank and if it is then set the value?
View 10 Replies View Relatedsection 100
section 200
100-1
200-1
I have a large spreadsheet with text, numbers and blank cells. Is there a code a can use to make all blank cell have a dash (-) without affecting the other cell with data.
I have a large spreadsheet, within which i am trying to remove commas from all cells. I get the error 'formula is too long' when I carry out the search. Some of the cells are >1024 characters in length and contain dates, text etc.
View 5 Replies View RelatedI am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I have attempted to alter this example to simply check if the cells are not blank by replacing the "X" with "<>", but I get errors in the SMALL function--it looks like the IF statement is just returning an array with all of the values set to FALSE, and none of the values in the array call out a location of the next filled cell.
How could you alter your fixed XLSX file to check for non-blank cells instead of "X" specifically?
I have two conditions setup in Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting.htm" target="_blank">conditional formatting. The first is setup for alternate row coloring with this formula inside Conditional Formatting:
Formula is = MOD(ROW(),2)
My Second Condition is
Cell Value is between $P$10 and $Q$10. This sets the font bold and a different color. The two cell values are two dates. I want to change the cells font color and bolding as long as the value is within that date range. It works fine, but for cells that are on the row that is colored the second condition doesn't apply for some reason.
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedHow can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedBasically, looking at the range E6:L19 I need to ensure that any data that is entered into any of these cells ends in either H or W, and if it doesn't flags up a warning message (which I am hoping to link in with the Worksheet_SelectionChange event)
I'm managing it for one cell, but not a whole range.
The following code works fine to determine if a particular character occurs within the selected range of cells:
Code:
Sub CheckIfCharacterIncluded()
For Each MyCell In Selection
If InStr(MyCell.Formula, "#") Then
MsgBox ("The " & "#" & " character was found in cell: " & MyCell.Address & " at position " & InStr(MyCell.Formula, "#"))
End If
Next
End Sub
However, I would like to extend this functionality to check for multiple characters, using some sort of array that contains all the characters I want to check for e.g. "#","*","£" and so on, without having to repeat the above code for each character for which I need to check.
I have a column of values of peoples initials and I want to cound how many times one persons initials occur in those cells. I can do this if the cells just contain one person i.e. "CH" or "DH" but if the cell has two or more peoples initials i.e. "CD DH" I can't do it as it only matches the exact search criteria.
How can I total the numebr of times a required set of initials appears in a specific column of cells? Not bothered is it requires a macro or a formulae, just can't seem to figure this one out.
is there a way to check for a value in a range, and return the value if it is not in the range, else return nothing?
H1 =85
B | C | D
25 | 50 | 75
40 | 30 | 10
12 | 9 | 66
None of the following IF statements will work:
{=If($B2:$C4="","",If(B$2:C$4<>H$1,H$1,"")}
{=If($B2:$C4="","",If(B$2:C$4=H$1,"",H$1)}
Initially I'm simply copying a data table from a web page using "Ctrl + A" then "Ctrl + C", and then pasting the data straight onto a new worksheet so I can work with it. (After temporarily re-naming the old sheet)
But I keep finding what looks like double-spaces after some of the important text within the Range of cells I'm working with. I need to be able to select & conditional format the values of the text in some columns of the sheet, so need to loose these trailing spaces.
Unfortunately, it's not consistence as to how many spaces trail the text I need. Sometimes it's only one space, sometimes its two spaces ?
So far, I've had mixed success with a recorded "Replace" code but none of the other codes I have found on forum pages either don't work all or seem to give any consistent results. E;g; TRIM, CLEAN
I suspect my problem is, I do not know how to call the code properly, or trying to work with too large a range ?
The start of my code reads:
Code:
Sheets("Data").Select
Sheets("Data").Name = "Old Data"
Sheets.Add After:=Sheets(Sheets.Count)
Sheets(Sheets.Count).Select
ActiveSheet.Name = "Data"
[Code]...
' At the moment I'm using to select the pasted range I want to work on: Range(Range("C46"), Range("C46").SpecialCells(xlLastCell)).Select
This is where I need a code to work on the new Data sheet and remove all the trailing characters.
MsgBox "All data cleaned successfully !", vbInformation + vbOKOnly, "All Done"
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
View 8 Replies View RelatedA1 = 3
A2 = 3
A3 = 3
formula: =A1A2 gives us FALSE....
Why does =A1A2A3 give us TRUE
What is the best formula to use to make sure no cells are duplicates?