is there a way to check for a value in a range, and return the value if it is not in the range, else return nothing?
H1 =85
B | C | D
25 | 50 | 75
40 | 30 | 10
12 | 9 | 66
None of the following IF statements will work:
{=If($B2:$C4="","",If(B$2:C$4<>H$1,H$1,"")}
{=If($B2:$C4="","",If(B$2:C$4=H$1,"",H$1)}
I am looking for a single formula I can run along a single row that looks at several columns of data, and then checks if the date range falls between the running row, take it's relevant number, and multiply it by a single rate. The attached probably explains it clearly - I think the solution would be some sort of Sumproduct, but my attempts have failed!Example - Date Range with Calculation.xlsx
View 10 Replies View RelatedI need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A.
Here is what I have but it is counting the dates in col A not the order numbers in B?
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
Is there a formula that I can use to check that all the depths are in a range of 1 to 5. If one depth is say 6 then this must be flagged up
View 4 Replies View RelatedIs there a way to test if let's say range a1:a10 contains a value of cell b1.
I would be thankful to get the VBA code to do that
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
View 8 Replies View RelatedI need some code that will check the valueof a combobox to see if it is a named range. i'm not sure where to start really? i know i probably need to use "ListNames" in there somewhere?
View 5 Replies View RelatedHi all, this might sound really easy but I have a Named Range in excel 2003.
Now I'd like to write a VBA code to check if this range exists before carrying on futher computations.
If I have a named range ("colors") which contains a bunch of different colors, and in a separate cell, I want to test whether a particular color is present in that range, how would I do that? For example:
Red
Green
Blue
=if([range contains "yellow"],1,0)
this formula would return 0.
=if([range contains "green"],1,0)
this formula would return 1.
I'm having trouble with the part in []'s.
I have this code that checks for blank cells and it works fine:
If Range("A15").Value = "" Then
I would like to change it to look in six specific cells, but the following code doesn't work:
If Range("A15:F15").Value = "" Then
What would be the best way to check if e.g. all the values in range A1:A4 were the same?
View 9 Replies View RelatedI have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.
Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""
[Code]...
But this won't start too after processing the do while line. How this .value command works.
I have a spreadsheet in which I have named columns. All columns have associated columns in different tabs. Using a toggle button I want to hide or unhide these associated columns on all tabs at the same time. Here is what I have so far:
Private Sub ToggleButton1_Click()
Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
My problem is I want to have a single string to hide/unhide the following Named columns on all sheets -- (Sheet 1 (COLU), Sheet 2 (DRCOLU), Sheet 3 (F1CCOLC), Sheet 4 (MSCOLC), Sheet 5 (PSCOLC) and Sheet 6 (POCOLC)
I was hoping to use something like -- Range("COLC, DRCOLU, F1CCOLC, MSCOLC, PSCOLC, POCOLC").EntireColumn.Hidden = True
I receive an error when I try to use it because only one of the names is used for each sheet. It needs to first verify the name exists on the sheet and if so, perform the Hide/Unhide function and if not move to the next name. When all names have been used, move to the next worksheet and perform the same action until all worksheet have been gone through.
I have attached a sample for better understanding. First of all, I need to check for the highest value in Col B and lowest value in Col C in the range from Time 0900 to 1100 only. I need to use the check time function (which i have no ideal how) rather than selecting the number of rows to check.
If my cell range in Sheet 2, K2 to K25 is empty/blank, then I want to fill that blank range with the same number/Value. It can be a 0 or a 1 or any other Value as required. But an Error 13. Type Mismatch message appears. Where is the error if I'm trying to fill the range with a Value if blank ?
Sub Macro_2()
Sheets("Sheet2").Select
Sheets("Sheet2").Range("K2").Select
If Sheets("Sheet2").Range("K2:K25").Value = "" Then
Sheets("Sheet2").Range("K2:K25").Value = "1"
End If
Sheets("Sheet3").Select
End Sub
I need two formulas that can do the folowing:
• check whether a cell contains text, if so, then trim all spaces and get result. If it doesn't contain text then set the result as blank.
• check whether THE CELL T13 contains text, if it does then check the adjected cell (U13) if it contains text, if so, then concatenate the two cells with a space between them and remove any other spaces. If the T13 doesn't contain text, the set the result as blank. Also, I have another question: how could I use the counta formula without counting spaces?
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
This does not seem to be working and I do not know why.
If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If
Upon deactivation of a worksheet I am trying to check a range of cells("B8:M8") for empties. If any cells are empty I want to generate a MsgBox that asks the user to remedy the situation. It is not necessary to tell them which cell is empty but it would be nice. Can anyone help me format this code?
View 2 Replies View RelatedI am using the following code to check data is entered in certain cells...
View 2 Replies View RelatedI am trying to search a column for specific values.... if the cells in the column equal X, Y, or Z then I want to keep them. Anything else, should be deleted....and not just the cell the entire row that it is in.
So I'd like it to search column E for a number of different values, if equal keep the data. If not (say E6 is not any of those values) then delete that row (all of row 6)
I have a list of strings as such
A1: A
A2: B
A3: D
A4: E
How can I check to see if this range is sorted with vba?
I have searched but havent found anything for strings.
I can only think of adding each cell to an array, creating a copy array, sorting the copy array and then comparing the two arrays. I want it to return TRUE, FALSE or 1, 0
detecting if a range has colored cells. What would the correct syntax be for the line in red?
Sub CheckForDups()
Dim ColumnNumber As Integer
ColumnNumber = 1
Columns(ColumnNumber).Select
Selection.FormatConditions.AddUniqueValues
Selection.FormatConditions (Selection.FormatConditions.Count).SetFirstPriority
Selection.FormatConditions(1).DupeUnique = xlDuplicate
[code]....
If I want to check a range of cells how would I modify this to do that?
Single Cell (working):
=IF(AND(Sheet1!T42=Sheet2!J68),"Yes","No")
Range (not working):
=IF(AND(Sheet1!C64:J64=Sheet2!C33:J33),"Yes","No")
If the data entered in Column "I" starting from row4, exists in range "X4:X12" then "Pend for audit" should appear in Column "R" of the corresponding row.
below is the coding Iam using.
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim StateName As String
Dim CName As String
Set Cells_Changed = Target(1, 1)
[Code]...
If a name is entered in cboRepName combo box, I want to check if the name matches the list of names in the named range "Names" found in sheet repInformation. If the name is not found, then perform tasks.
Here is what I have so far, of course is not working, but I think I am close.
Code:
Private Sub cboRepName_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
Dim repName As String
Dim nRange As Range
[Code].....
I need to judge whether a number falls between a range of 2 numbers.
Ex:
A1=332.024 B1=349.956
C1=335.23 So D1 must give 1 (since between the range) else 0.
If C1=332.02 D1=0
If C1=349.9566 D1=0
If C1=332.024 D1=1
If C1=349.956 D1=1
What formula should be punched in D1?
I have this formula =COUNTIF(WallA,D35) which works great unless the named range is deleted. Is there a way to check to see if the named range is valid in formula?
View 9 Replies View Related
