Formula To Tell If Range Has All Blank Cells In It?
Nov 13, 2012
I have a spreadsheet where I want to filter out a row if the entire row has zeros across all the columns. I cannot just use a Sum() formula because some of the numbers are negative and there is a chance it could zero the sum out.
Currently to do this I am using the following to tell if there are values in each of my rows:
Code:
ABS(K3)+ABS(T3)+ABS(U3)+ABS(V3)+ABS(W3)+ABS(Z3)+ABS(AC3)+ABS(AF3)
Is there any way to write a formula where I don't have to keep adding to the formula when I add another column?
View 1 Replies
ADVERTISEMENT
Jul 22, 2014
I've normally just dynamically selected a range using the xldown feature but because this row contains formula it goes always down to the bottom of the formula instead of the last cell which isn't blank.
How would i go about generating this dynamic range that stops at the first cell that contains no value (but has a formula)? Perhaps a do while loop which looped down until it hit the first blank and then assigned the cells it had looped through as the range?
View 3 Replies
View Related
Sep 9, 2013
I am try to get the following VBA macro to work; however, I keep getting hung up on errors regarding the formula I am trying to input. It is getting hung up on the apostrophes and dollar signs. I am fairly new to VBA so I am lost when it come to converting my sheet formulas to VBA.
Code:
With ActiveSheet.UsedRange.SpecialCells(xlCellTypeBlanks)
.Formula = "=RAND()*0+VLOOKUP(INDIRECT(ADDRESS(1,COLUMN(),3),TRUE),INDIRECT("'"&TEXT(INDIRECT("$A"&ROW(),TRUE),"DD-MMM-YYYY")&" Inv'!"&"$J:$K",TRUE),2,FALSE)"
.Value = .Value
End With
View 3 Replies
View Related
May 8, 2012
I need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
View 7 Replies
View Related
Jan 13, 2014
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
View 4 Replies
View Related
Jul 15, 2008
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
View 14 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Feb 10, 2008
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies
View Related
Feb 7, 2013
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
View 7 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related
Mar 6, 2012
I am trying to add the following code to fill in a certain range only if the range is blank. I can get it to fill in with the formula but it will still enter over if the cell already contains information.
Code:
Sub YTD()
Dim isempty As Boolean
isempty = True
For Each cell In Sheets("YTD%").Range("December").Cells
If cell.Value! = "" Then isempty = False
[Code] .......
View 3 Replies
View Related
Aug 30, 2006
I have a list of 400 cells all in column A. Is there a way to have XL divide them up so that 100 are in column A, 100 in column B, etc., while still treating them like a single column (e.g. Sort will sort them all together)?
View 8 Replies
View Related
Jul 4, 2010
Is there a non-array way to return only the non-blank cells from a range? At the moment I use below formula, but it slows down the file considerably ...
View 14 Replies
View Related
Oct 17, 2009
Is there a VBA macro that can be written that will look in a range of cells in a coloum, look to see if its blank and then copy the value from the cell right above it into it?
View 8 Replies
View Related
Oct 28, 2011
I am trying to write a macro which will copy a formula located in cell "A1" and paste it into all blank cells within the range "B1:B20" .
View 9 Replies
View Related
Feb 28, 2012
I am looking to compare a range that contains the non blank cells and identify if the values are the same in the last 3 non blank cells in that range.
(in the range there could be as much as 12 non blank - but only compare the last 3)
View 1 Replies
View Related
Aug 17, 2012
I have a file with four columns of data that represent quarterly figures. I would like to hide the entire row if all four quarters are blank. The cells I need to check are P, Q, R & S and the data begins with row 21. I know how to get the last row in the range.
View 5 Replies
View Related
Jun 16, 2013
I am looking for a macro to put No in all Blank cells in used range of a sheet.
View 1 Replies
View Related
Aug 21, 2013
I would like to get some code that will fill blanks in a range.
I have not used the board facilities properly. In the following table I need each blank cell in column B to be filled with the text from the preceding cell that has text in it.
i.e. B2 to be populated with "text1". Cells B4:B6 to be populated with "text2".
The code needs to know that row 9 is the last row to populate.
A
B
1
head
text1
[Code] ........
View 8 Replies
View Related
Jan 19, 2009
This formula counts how many dates in the range match the month in cell (Q3). How do I get this formula to to not count empty cells. I keep getting $VALUE! as my answer when I include all the cells in the range.
This is the formula:
=SUMPRODUCT(--(P20:P976-DAY(P20:P976)+1=DATE(YEAR(Q3),MONTH(Q3),1)))
This is the formula in the cells of the range that is being used above:
=IF(D26="","",IF(F26"",F26,IF(I26"",I26,IF($Q$3"",$Q$3))))
I needed this formula to leave the cell blank if all the data cells were blank that's why I have =IF(D26="","", at the begining.
View 9 Replies
View Related
Apr 21, 2006
I seem to be 'search challenged' today - I'm sure this is easy. How does one count the number of non-blank cells in a range using VBA?
View 7 Replies
View Related
Dec 7, 2006
I have a set of integers in the ranges of: B11 to B40, C11 to C40, D11 to D40.
Occasionally the values in the cells are deleted and thus left as a "blank" cell.
I wish to create a macro that will find these blank cells in these ranges and replace them with a simple 0.
View 4 Replies
View Related
Dec 19, 2006
I am trying to copy the contents of all non-blank cells starting at A9 to R1 of another sheet " Record Form Games 3583). If A9 is empty it will skip a row and repeat until row 43. Each of the cells A9:A43 must also be able to act as a reference point for Offsetting and selecting a series of ranges in the same row.
View 9 Replies
View Related
Apr 11, 2007
I'm feeling pretty inadequate at the moment ... I'm trying to determine something that (I think) would be relatively simple ... How do I determine if a single column , for example, (B:B) is blank (or null)? Alternatively, how do I determine if a range of cells in a column or columns, for example, (B1:B30) or (B1:D30) is blank (or null)?
View 2 Replies
View Related
Aug 25, 2007
I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.
The cells datatypes are mixed, some are Integer and some are String.
Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.
View 5 Replies
View Related
Mar 12, 2008
I have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
View 3 Replies
View Related
Jan 22, 2008
i've got a pricing spreadsheet that's doing my head in. hopefully someone can help me with my latest formula issue.
when i expor the file as a pdf, you loose the column names. so...
a b c d e f g h
part ID qty 1 price qty 2 price qty 3 price discount price
i want to calculate the discount price as a perctange of either b/c or d/e or f/g groupinsg (qty break & price for that paricular qty amt). The problem is b/c are populated for all rows. some parts have a secdonary price break (d/e) and some have a tiertary price break (f/g).
I want to take the percentge discount off the high qty price break. So if f/g is populated I want to take it from that. If it's not populated, then e/f. and Only if f/g & e/f are NOT populated do i want to take the discount from b/c. is there a formula i can insert into H to do this?
View 9 Replies
View Related
Jan 21, 2010
I've used this site for help many times, but this was the first time I couldn't find the answer to my question through searching. I've looked all over this site & elsewhere, tried 2 dozen different solutions, and nothing seems to work.
I've used a budgeting spreadsheet for years, which lets me plan bills weekly according to paychecks. For each month, going down the "Expenses" column, there lists are seperated by when they'll occur. So there may be three blank cells, then electric bill, mortgage, blank, blank, cable bill, blank, cell phone, blank, gasoline.
On the checkbook worksheet, I want to enter a drop down box for the Expenses. The problem is, every solution I've found for doing this is aimed at eliminating blank spaces at the end of the list. This by necessity has to have blank spaces throughout the list, but I would like them to disappear in the drop down menu.
View 3 Replies
View Related
Sep 5, 2009
Using formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.
The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?
View 4 Replies
View Related
