having the formula exclude counting text in cells.
=IFERROR(SUMPRODUCT(--(INDIRECT("'"&TEXT(B$2,"mm-dd-yy")&"'!A4:A44")=Tracking!$A3)*(INDIRECT("'"&TEXT(B$2,"mm-dd-yy")&"'!D4:J44")>8)),"")
I would like it to only count numeric values over 8.0. Currently if I have text in a cell such as "PTO" it returns as a added value.
Is there a way to do a Formula (SUM) but exclude cells with invalid values? I would like to add up all values in attached spreadsheet for cells A14 to A28 and again for A49 to A63, as well as get an average C-14 to 28 and again for C49-63.
As some of the cells contain text rather than numbers, the formula doesn't work. how to exclude these cells?
I need a formula that calculates the values of 5 seperate cells located in different places throughout my sheet. The value will either be numerical or display a text value (normally "RD"). If it displays text I do not want that value counted. So it literally just totals the number values.
View 7 Replies View RelatedI have been trying to count dates in my spreadsheet. The dates are supposed to go back in time (what they do). But I want them to jump over the weekends' dates instead of landing on them.
What I have is Start Date, Req'd Qty, Days it takes to make, Date it is required to start production (which I have a problem with).
A
1 26-Nov [Thursday]
2 1500
3 5
4 'Problem' I used for this cell that formula: =if(A2>0,A1-A3,"") , as I don't want it to show anything if there is no requirements.
It comes back with 21-Nov which is Saturday when I want it to come back with 19-Nov (Thursday) as we only have 5 working days in a week.
I'm trying to set up a dashboard with a table and some formulas so that I can just copy a data export into one tab and have the table perform various Vlookups, charts, etc. The trouble I'm having is that some of my cells contain a mix of text, and I'm looking for specific text only. Example:
Address |Tags | Result
Email 1 |t1 t2 t3 t4 | Email 1
Email 2 |t1
Email 3 |t2 impact1 | Email 3
Email 4 |impact2
Email 5 |impact2 t2| Email 5
My data source has thousands of rows, and I'm looking at the Tags column. I want to use a Vlookup that gives me the email when [Tags] contains "t2", but my search is getting confused with "impact2". Is there a formula to search for "t2", but not get confused with "impact2"? I considered using =NOT, but I don't want to exclude cells just because they contain "impact2". If there was a formula for =IGNORE, that would be marvelous. My formulas are getting longer & longer, but they always seem to break in the end.
Basically I'm trying something like:
=IF(OR(ISNUMBER(SEARCH("* t2*",Table1[Tags])),SEARCH("t2*",Table1[Tags])),"Yes","No")
(Once I get the IF figured out, I'll use Vlookup to bring out the Address).
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies View RelatedThis should be simple, but I am struggling with finding a way to use the search or find function to identify text characters. This is my situation, I have for example a cell that contains FW023 or D1234. I need to be able to count the number of characters that are text.
i would think I would be able to do it with the search or find function, but can't figure out how to get it to just count the number of text characters with in it.
I'm putting together a calendar that will have show when people are off on holiday, training, out of the office or ill. But as it will identify people by name I have changed to cell style to reflect just what activity they are doing. As such I want to be able to count over a year just who has done what.
Is there a piece of code that can count based on the text inside a cell and it's style e.g. "20% - Accent1"
I'm working on an excel file where I can see if customers pays too late.
I've got this for the moment:
Date order
Expiration date
Days over
Days too late
Paid?
15/06
15/07
0
-2
NO
[Code] ........
My question is about "Days too late". When Paid changes to "YES", the days too late stays the same number it was before. When it's "NO" it keeps counting.
I have a column that can have a single name or multiple names typed in each cell. I would like to use a vlookup table to match against the cells values. Exact matches are no problem when it is a single name, but I need a formula that matches up the name, but does not need to match the entire cell text (name1, name2, name3,...) and can count the number of cells that contained this text with in a range. In the example above, I have three names.
If those three names are listed in the vlookup table, I want to count each one so that I can sum up that company 1 appeared x number of times with in the column and is x % of all company names, company 2 appared x number of times and is x% of all companies, and so on. My formula to match exact text values looks like this: =IF(ISERROR(VLOOKUP(D4,$H$7:$J$48,3,0)),0,VLOOKUP(D4,$H$7:$J$48,3,0)) This works fine if the cell value is simply company 1, etc.
Greetings, I have a particular column containing data similar to:
X24A
X15B
G15A
X23S
I have sorted the data to have all the X marks together, and now I want to run a counter so i can select the data and delete. Following is a sample of the code that is NOT working:
'Delete X Piece Mark Rows
Range("L2").Select
counter = 0
ActiveCell.Select
Do While ActiveCell = "X" & "*" ' This is the line that crapping out
If ActiveCell = "X" & "*" Then counter = counter + 1
ActiveCell.Offset(1, 0).Select
Loop
Range("A2").Select
Range("A2", "L" & counter + 1).Select
Selection.Delete Shift:=xlUp
Range("A1").Select
is there a formula to exclude #div/0! from a max value. say you have a column with a few #div/0! is there any way for the max not to be #div/0!
View 12 Replies View RelatedI'm trying to sum up the total of a list excluding a list like this:
Column B
012*
019*
1758*
70228
70229
70230
70241
In my worksheet 1, it contains e.g.
Column AC
012-something
012-text
019-jumbo
016-things
70228
70221
Column W contains the numbers I want to add up:
$15
$12
$10
$19
$15
$11
My current formula is:
=SUMPRODUCT(--ISNA(MATCH(Sheet1!AC$4:$AC$157,B2:B7,0)),Sheet1!W4:W157)
It has managed to exclude the numbers (e.g. 70228, 70229, etc) but not the text strings (e.g. 012*) when summing it up
I have a speadsheet where I have a cell that reads a named range via OFFSET. The range consists mainly of numbers but a few cells contain the text UL (Unlimited)
The cell that "reads" the OFFSET is then used in another cell where it is multiplied by either 2 or 3 depending on user input.
The problem occurs where the cell attempts to multiply the text "UL" which results in "#VALUE!"
How can I have this cell with the multiplication bypass the multiplication and simply return the text "UL" in the case of reading text from the named range.
I've setup a macro button to sort some stockpile items from A-Z so entering quantity on hand can be done more easily. Each cell is a drop-down selection so at various times, there can be different stockpile items in the list, thus why, I setup a macro to quickly sort the list.
However, I've got some text (Select Stockpile Item) that I wish not to be included in the A-Z sort as this might put items starting with T or later at the end of the sort.
Sub SortMySpecialStockpileA2Z()
If MsgBox("Are you sure?", vbYesNo + vbQuestion) = vbNo Then
Exit Sub
Else
Range("K4:L110").Select
ActiveWorkbook.Worksheets("MyStockpile").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("MyStockpile").Sort.SortFields.Add Key:=Range("K4") _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With ActiveWorkbook.Worksheets("MyStockpile").Sort
.SetRange Range("K4:L110")
.Header = xlNo
.MatchCase = False
.Orientation = xlTopToBottom
.SortMethod = xlPinYin
.Apply
End With
End If
End Sub
For example the formula below is in cell AU6. I want to exclude A6 from the array. Row AU7 would need to exclude A7 when I drag it down.
=MAX(IF($A$6:$A$493=AT6,$AS$6:$AS$493))
I've used the sumproduct formula very sucessfully in a workbook. The workbook is used to monitor discrepancies routed to other departments. Column U has the status of the discrepancy (Open, Closed, Cancelled etc). The below formula returns the number of discrepancies raised to a particular department. Now I need to tweak the formula to exclude values "Cancelled" found in range $U$119:$U:417.
=SUMPRODUCT(--(Register!$I$119:$I$417=$A4),--(Register!$C$119:$C$417=B$2),--(Register!$B$119:$B$417))
I have been asked to create a worksheet to calculate the percentage of the utilisation of a number of loan cars per month. Each of the cars may be used on each and every day of the week but the percentage utilisation is to be calculated on working days only. However it is essential to record the name of the driver of the car at weekends and holidays. Column A is populated with the dates of the month. Colum B is populated with the relative days of the week. In column C and subsequent columns I record the name of the driver of a particular car registration. Is there any way that I can count the number of drivers of each car on working days only and not weekends or bank holidays?
View 5 Replies View RelatedNames
Quarters
Nickels
Dimes
Pennies
Record exc 0s
John
0
1
2
3
[Code] ........
In my table above, I would like to use the countif formula to count records based on the person, but I don't want the count to include values if the sum of quarters, nickels, dimes, AND pennies equal 0.
I have 16 columns in a single row that I am trying to apply to an array formula. That works, but I need to exclude all cells with the number "0" from the array range. I think I can do this myself in VBA but I don't want to run a macro every time something changes. Is it possible to do this in excel?
{=10*log(10^(A1:A16/10))}
It is possible that A1:A4 is a non-zero range and A12:16 may be a non-zero range. (Zeros will always be grouped in 4s)
Question is...in the below formula the red are pointing back to name ranges in a different tab on my spreadsheet. On that spreadsheet I also have a name range called DTCCSUBSUPPREF
I would like to add within my formula, a string which will point to that name range and exclude values if they fit my criteria. Basically I need to see values only where comp or tri dont show up. comp or tri could be the only value in the cell, or could be in the beginning of a string, at end, or in between. Below examples. I have tried (--(DTCCSUBSUPPREF<>"*comp*")*(--(DTCCSUBSUPPREF<>"*tri*") , and I would have thought the * characters would have served as a catch all.
Below is the entire forumla just in case.
11111111FT04comp
comp
tri
11comp
11tri
tri11111111FRP06
=SUMPRODUCT((--(DTCCSUBTRANSTYPE<>$G$2))*(--(DTCCSUBEVENTTYPE<>$I$2)*(--(DTCCSUBBACKLOAD<>$I$3)
*(--(DTCCSUBINPUTSOURCE<>$I$4)*(--(TEXT(DTCCSUBTRADEDATE,"MMM-YY")=$D$2))))))
I have below formula which gives me the due status.
[Code] ......
How can I modify the code so it excludes Saturday and Sunday.
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedI have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
apple
banana
Assume above on cell a1 and a2
What is the formula on cell a3 to count these, I know count(a1:a2) that counts numeric, don't know how to deal with text count.
Im trying to find out a way of counting the contents of, say: column C where that contains text as long as column B = a variable
Basically column C contains the words Sale and Lead and i need a function that reads column B for examples of a user defined variable (1-4) and counts sale or lead in column C if this condition is satisfied.
like a sumif but capable of adding text (two cases of in this example but not really vital as the only things in column C would be sale, lead or left blank)?
I am currently using a pivot table to display data. At the moment, as you can see from the spreadsheet I have something that shows land use, suites and costs. how to calculate a total cost - but only counting each suite once.
I would like to do similar thing for the bottles required, this is based on information from background! I am hoping get something just like the way costs are generate, by only counting each bottle once.
I have 80 entries in Column A. they all have a text of SS, LN, LA, LB in column B.
I want column C to total the said codes in B.
EX:
COLUMN A COLUMN B COLUMN C
UNIT # CODE TOTALS
6100 LN SS=3
6101 LA LA=2
6102 LB LB=2
6103 SS LN=2
6104 LA
6105 LN
6106 LB
6107 SS
6108 SS
How can I count all the cell text from different columns?
I have a sheet..that has the well known columns from A to EM, but let's say A to Z (A,B,C,etc).
I want to count all the cells that have text inside from columns: A,C,E,G,I (so, from 2 to 2). But the counting to be for all these A,C,E,G,I, etc columns, and to be put in a cell which gives this total number as info for user.
How can I do this?
