SUMPRODUCT Exclude Numbers And Text Strings?
Apr 19, 2014
I'm trying to sum up the total of a list excluding a list like this:
Column B
012*
019*
1758*
70228
70229
70230
70241
In my worksheet 1, it contains e.g.
Column AC
012-something
012-text
019-jumbo
016-things
70228
70221
Column W contains the numbers I want to add up:
$15
$12
$10
$19
$15
$11
My current formula is:
=SUMPRODUCT(--ISNA(MATCH(Sheet1!AC$4:$AC$157,B2:B7,0)),Sheet1!W4:W157)
It has managed to exclude the numbers (e.g. 70228, 70229, etc) but not the text strings (e.g. 012*) when summing it up
View 2 Replies
ADVERTISEMENT
Apr 1, 2009
I need a formula that calculates the values of 5 seperate cells located in different places throughout my sheet. The value will either be numerical or display a text value (normally "RD"). If it displays text I do not want that value counted. So it literally just totals the number values.
View 7 Replies
View Related
Nov 6, 2012
I have a speadsheet where I have a cell that reads a named range via OFFSET. The range consists mainly of numbers but a few cells contain the text UL (Unlimited)
The cell that "reads" the OFFSET is then used in another cell where it is multiplied by either 2 or 3 depending on user input.
The problem occurs where the cell attempts to multiply the text "UL" which results in "#VALUE!"
How can I have this cell with the multiplication bypass the multiplication and simply return the text "UL" in the case of reading text from the named range.
View 2 Replies
View Related
Nov 21, 2006
I have several cells in a column that look something like this:
Cell A1: abc 1234 def ghi
Cell A2: xxxx aa b 245 qqqqq
Cell A3: abcdefg hij kl mnopqr s
Is there an excel formula or combination of formulas I can use to identify:
(1) whether any given text string (such as those above) include numbers, and
(2) what the first number (which could contain 1-4 digits) contained in the text string is?
View 3 Replies
View Related
Jun 23, 2008
I need to remove multiple instances of pages numbers from a 2000 character text string I have dumped into a cell. The spacing is not equal between the page numbers but they always take the form |#####-##| i.e. bar delimited 5 digit-2 digit. I tried SUBSTITUTE but it will not accept wildcards. I was thinking of looping through a SEARCH. The numbers are ordered ie |00001-01| to |00001-25| then |00002-01| etc, stopping at 25. This might lend to looping but I couldn't wrap my head around the VBA to accomplish that. A sample of the text
"|00006-01| (Defendants' Exhibit Nos. 1,2 marked for |00006-02| Identification.) |00006-03| BY MR. JOHNSON: |00006-04| Q. Doctor, I am handing you Exhibits 1 and 2. |00006-05| Exhibit 2, is that the one that you brought with you, |00006-06| the deposition notice of today? |00006-07| A. I believe so, yes." Auto Merged Post Until 24 Hrs Passes;I should have said this before but this is for use on Excel 2003 WinXP.
View 8 Replies
View Related
Jun 26, 2008
Need to write a Macro to only extract numbers from text, characters and numbers fields. I would like the numbers to be extracted in column B, C & D. I am only interested in numbers that begins with 200's, 800's and 4500's. see the attached file.
View 3 Replies
View Related
Feb 10, 2014
I have a field that contains rows of data, each made up of a Number followed by Text. The length of the numbers differ - sometimes 4 digits, sometimes 5 or 6. Similarly, the text differs by word-count. An example is
2546 Nags Head
75698 Dog & Duck
634 Crown
I want a way of dividing the numbers from the text (numbers in one column and text in another).
Standard 'Text to Columns' won't work: I can't use 'Fixed Width' due to the number-length varying, and I can't use 'Delimited' and [space] as it will then split all the text up word-for-word (concatenating them back will take ages as my list is 480 rows long).
View 5 Replies
View Related
Jun 19, 2013
Doing some job costing on our lowes invoice and am using SUMIF and asterisks to account for all the different names that get used for properties by the cashiers. An example of that range column is:
67TH AVE
19112 PONCA
51ST
STERLING
9420 67 ST
1503 SW 13TH
51ST
10818
19112 PONCA
19112 PONKA
I have formatted this whole column as text and get strange results from sumif when there are exact matches. For example the "10818" string is uniform through the spreadsheet and returns a result of 0.00 if entered as "*10818*" for criteria but returns the correct amount if I use "10818" or 10818 with no quotes.
It seems to be related to the text strings that contain just "numbers" as I'm having no trouble picking up exact matches when there are alpha characters.
View 2 Replies
View Related
Jan 16, 2014
How to use Sumproduct for the following?
Col1 Col2
5 1 mL
4 1.5 mL
5 2.5 mL
7 2 mL
2 1.5 mL
View 7 Replies
View Related
Feb 16, 2014
Actual
Result
london#123;new york#34;
london;
new york;
delhi#145;chennai#54;
delhi;
chennai;
hyderabad#748;
hyderabad;
[code]....
removing the # and numbers from text and add new line after ; symbol. So it would save me a lot of time in preparing status.
View 9 Replies
View Related
Dec 4, 2013
I am trying to exclude unusable data from my analysis. I have flagged data in the flag column on sheet 1 by a "1". A "0" is good data. On sheet 2, I have counts for the amounts of a certain code per partner. I used a sumproduct formula for the counts, but now I want to exclude all data with a flag "1".
View 4 Replies
View Related
Apr 14, 2009
I've used the sumproduct formula very sucessfully in a workbook. The workbook is used to monitor discrepancies routed to other departments. Column U has the status of the discrepancy (Open, Closed, Cancelled etc). The below formula returns the number of discrepancies raised to a particular department. Now I need to tweak the formula to exclude values "Cancelled" found in range $U$119:$U:417.
=SUMPRODUCT(--(Register!$I$119:$I$417=$A4),--(Register!$C$119:$C$417=B$2),--(Register!$B$119:$B$417))
View 3 Replies
View Related
Jan 22, 2014
Question is...in the below formula the red are pointing back to name ranges in a different tab on my spreadsheet. On that spreadsheet I also have a name range called DTCCSUBSUPPREF
I would like to add within my formula, a string which will point to that name range and exclude values if they fit my criteria. Basically I need to see values only where comp or tri dont show up. comp or tri could be the only value in the cell, or could be in the beginning of a string, at end, or in between. Below examples. I have tried (--(DTCCSUBSUPPREF<>"*comp*")*(--(DTCCSUBSUPPREF<>"*tri*") , and I would have thought the * characters would have served as a catch all.
Below is the entire forumla just in case.
11111111FT04comp
comp
tri
11comp
11tri
tri11111111FRP06
=SUMPRODUCT((--(DTCCSUBTRANSTYPE<>$G$2))*(--(DTCCSUBEVENTTYPE<>$I$2)*(--(DTCCSUBBACKLOAD<>$I$3)
*(--(DTCCSUBINPUTSOURCE<>$I$4)*(--(TEXT(DTCCSUBTRADEDATE,"MMM-YY")=$D$2))))))
View 6 Replies
View Related
Nov 4, 2007
I am currently coding up a VBA macro that will counts up the number of occurrences of a particular event for a particular date. The problem is that it keeps returning zero as the result. I thought it might have been a data type mismatch issue as the cell format is a date in the mm/dd/yyyy format but the data is stored as a string so that I can easily manipulate it with the built in VBA functions. I tried changing the data type but still received zero as the result. 'a' and 'c' refer to cell ranges, criteria is a string of characters and criteria2 is a string that pulls in a date in the format of mm/dd/yyyy. I know this code works when I don't use dates but I can't figure out why it doesn't work with dates.
criteria = Application.Workbooks(FileName).Worksheets("Day_Counts").Range("B1").offset(0, column).Value
View 9 Replies
View Related
Jan 9, 2013
I have a series of incident reports (some of which are injuries), and I'm calculating the number of incidents per body part per month using:
=SUMPRODUCT((ISNUMBER(FIND($D4,owssvr!$Q$2:$Q$2188)))*(MONTH(owssvr!$A$2:$A$2188)
=MONTH(math!F$2))*(YEAR(owssvr!$A$2:$A$ 2188)=YEAR(math!F$2)))
In which D4 is the body part (Neck, for example), owssvr is the sheet with the records being summarized and F2 contains the month being queried.
The problem I'm having is that I want to calculate data for a region of the body (head & neck), which will include count any record that has a part of that body region (nose, face, eye, tooth) mentioned in the affected area text. If I simply sum all the values calculated for each body part, records that include multiple parts (e.g. "scratched nose and eye") will be counted twice.
Can I calculate whether a range of cells for the incidents contains any of a specified range of body parts (listed in D4:D15), but do this for each month, and count each record only once (e.g. "cut nose" = 1 record, "cut nose & eye" = 1 record).
View 1 Replies
View Related
Aug 16, 2008
Is there a way either by VBA or manually (preferably both, if possible) to actually unite the X amount of numbers that are in a cell given the contents is alphanumeric? I'll give you the following examples to see if you can understand what I' referring to?
DATA output should be
asd67,h876 --------> 67876
2,3,ujdj5&34 -------> 23534
909k86m34 --------> 9098634
View 14 Replies
View Related
Aug 15, 2008
I import data from another program in order to evaluate it. Unfortunately, one of the fields I need contains copyright data, however, it has been very inconsistently entered into the database. For example, sometimes the data appears "c1999." or "-1999" or "" or "[1999]" or even "19?" and also sometimes "1999, 1990" and many other variations on that. I discovered the link in the excel help file about extracting numbers from alphanumeric strings, but my situation is still too variable for it to apply; that file didn't take into account that alphanumeric strings don't always lump numbers and letters together. I was able to correct a few things, but my command of excel isn't knowledgeable enough to really come up with something effective.
Some ideas I had that I don't know how to implement: is there a way to strip non-numerical characters from an alphanumeric string? (I've been doing some find/replaces to get rid of some of it, but that is obviously not very efficient when I have to repeat this process daily.) Perhaps then I could just detect the first 4 numbers of the string somehow. However, that doesn't solve the problem of when a wild card is used as in "199?" or "20?" etc.
Bottom line, I just need to grab the first four numbers that appear in the string (but NOT additional numbers that occur after a wild card or a space if the year was not completed in 4 numbers; in that case I'd just be happy with a null value).
I've been doing this with a formula so far. My only experience with macros has been in simply recording them, not actually writing them, but I'll give anything a try.
View 9 Replies
View Related
Jan 4, 2010
i have a worksheet filled with numbers in each cell (the worksheet might have a total of 150 rows and 150 columns of numbers).
the numbers typically range from 1-3 or 1-9 or 1-150.
however, there are also multiple 997, 998, and 999 numbers in the cells.
i need to identify the highest number in the worksheet that is not 997, 998, or 999.
View 14 Replies
View Related
Dec 18, 2013
I'm trying to figure out a formula to use that will exclude negative numbers. I have two dates. I'm trying to find the difference between the two dates assuming there is a date in the first column. At times there will be a situation where the date in A1 is before the date in A2 and it returns a negative number. I'd like to return a blank if there is a blank cell in column A and also return a blank if the return number is a negative.
Example:
A1 = 1/15/2013 B1= 1/10/2013 C1(formula) =IF(A1="","",(A1-B1) C1 will then reflect 5
A2 = (cell is blank) B2= 1/18/2013 C2 (formula) =IF(A2="","",(A2-B2) C2 will then reflect a blank cell
A3 = 1/5/2013 B3 = 1/15/2013 C3 (formula) =IF(A3="","",(A3-B3) C3 will then reflect -10
I'm trying to figure out a formula that would also allow C3 to reflect a blank cell since the formula returns a negative.
View 5 Replies
View Related
Nov 8, 2008
I am using Excel 07 with Vista, and creating a spreadsheet in which users will be inputting a record into every row.
There is a row that requires a number to be entered, where some of the numbers will begin with 0 or 00 or even 0000. I want to make sure no-one incorrectly enters a letter, however with data validation set to whole numbers, it formats the cell to change an entry of "005667" into just "5667". There is no set length for the field.
The only way to have "005667" is the change the column to text, but then obviously that defeats the whole purpose!
View 10 Replies
View Related
Jun 18, 2014
I'm trying to set up a dashboard with a table and some formulas so that I can just copy a data export into one tab and have the table perform various Vlookups, charts, etc. The trouble I'm having is that some of my cells contain a mix of text, and I'm looking for specific text only. Example:
Address |Tags | Result
Email 1 |t1 t2 t3 t4 | Email 1
Email 2 |t1
Email 3 |t2 impact1 | Email 3
Email 4 |impact2
Email 5 |impact2 t2| Email 5
My data source has thousands of rows, and I'm looking at the Tags column. I want to use a Vlookup that gives me the email when [Tags] contains "t2", but my search is getting confused with "impact2". Is there a formula to search for "t2", but not get confused with "impact2"? I considered using =NOT, but I don't want to exclude cells just because they contain "impact2". If there was a formula for =IGNORE, that would be marvelous. My formulas are getting longer & longer, but they always seem to break in the end.
Basically I'm trying something like:
=IF(OR(ISNUMBER(SEARCH("* t2*",Table1[Tags])),SEARCH("t2*",Table1[Tags])),"Yes","No")
(Once I get the IF figured out, I'll use Vlookup to bring out the Address).
View 1 Replies
View Related
Feb 3, 2014
Is there a way to do a Formula (SUM) but exclude cells with invalid values? I would like to add up all values in attached spreadsheet for cells A14 to A28 and again for A49 to A63, as well as get an average C-14 to 28 and again for C49-63.
As some of the cells contain text rather than numbers, the formula doesn't work. how to exclude these cells?
View 4 Replies
View Related
Jan 26, 2007
I am trying to come up with a formula which would combine two groups of numbers, put them in numberial order and remove duplicate numbers:
3 6 10 22
1 3 5 9 10 13 19
The above two groups of numbers are in separate cells in two different rows.
the result would also be in a different row: 1 3 5 6 9 10 13 19 22
View 14 Replies
View Related
Jan 7, 2010
I have a .csv file that contains numerical data in the form of strings, much of which starts with leading zeros (i.e. "012345"). I double checked to make sure the .csv file has the leading zeros and that they are wrapped in quotation marks in notepad, and it does. However, when Excel opens the file, it must read those strings as numbers, becuase it chops off the zeros. Does anyone know of way to fix this? Can Excel read numbers as strings straight from a .csv file?
View 3 Replies
View Related
Mar 7, 2009
I have this formula that extracts numbers from alphanumeric strings.
{=1*MID(A1,MATCH(TRUE,ISNUMBER(1*MID(A1,ROW($1:$100),1)),0),COUNT(1*MID(A1,ROW($1:$100),1)))}
However this extracts only the 1st instance of the numbers
In a string like 123avfbsdf4556.. it'll extract only 123.
My questions are the following:
1. Is there a way that i could get the result as 1234556
2. A way which refers to a cell where I put in a number and it'll extract those many number instances. In the above example, if I put the number as 1, it'll extract 123. If I put the number as 2, it'll extract 4556 and so on.
I guess this would require some modifications to the Match function so that it does not look at only the 1st instance.
View 9 Replies
View Related
Feb 28, 2013
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies
View Related
Mar 8, 2013
How do I use an Excel formula to find which (if any) multiple sets, each of up to 50 words, exist in a series of rows of a spreadsheet - if set A has one or more words found in a searched cell.
A positive result will return a specific value in the designated result cell. If none of the words in Set A is found in the searched cell, the formulae will repeat the test for the words in Set B, and so on.
After all 50 sets of words have been tested, the formula will move to the next cell in the searched column.
New words will be added to the sets of words continually as required.
Multiple words within sets are included in double quotes. Within each set of words there will be some n-tuples of words (i.e. 24 adjacent words) that contain one or more of the words in the set, but for which the formula will be required to return a negative result. Example: Set A = word 1, word2, word 3, "word1 word2 word3". (The words within a set could also be each entered in separate columns, as opposed to all included in a single cell.) The single column of text to be searched is about 10,000 rows.
I am wanting to use the above in a spreadsheet that contains data downloaded from a series of bank accounts to automatically allocate items of expenditure to one of 20 or so different categories of expenditure.
The formula will search the description field to find words that are used in the in the downloaded files from the various accounts to describe each transaction.
If a word describing travel expenditure (e.g. hotel, "holiday inn" but not "holiday travel") is found in the description of an expenditure item - the item cost will be allocated to the TRAVEL EXPENDITURE column, which is one of 20 or so different categories of expenditure.
Happy to consider a different solution if the task can be done better a different way.
Tried using a combination of INDEX/SEARCH/IF in Excel, but was not able to get a correct result. PS I am using Excel 2011 for Mac - which does not allow macros, so the solution needs to be entirely formula based.
View 1 Replies
View Related
Sep 27, 2006
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
View 9 Replies
View Related
Sep 4, 2009
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
View 9 Replies
View Related
Jul 14, 2014
having the formula exclude counting text in cells.
=IFERROR(SUMPRODUCT(--(INDIRECT("'"&TEXT(B$2,"mm-dd-yy")&"'!A4:A44")=Tracking!$A3)*(INDIRECT("'"&TEXT(B$2,"mm-dd-yy")&"'!D4:J44")>8)),"")
I would like it to only count numeric values over 8.0. Currently if I have text in a cell such as "PTO" it returns as a added value.
View 3 Replies
View Related
