Formula To Rank Without Duplicates
Jan 6, 2008I am using the following formula to rank a list of data:
=SUMPRODUCT(--($A$2:$A$140=A2),--($B$2:$B$140=B2),--(M2
ADVERTISEMENT
Rank Based On Criteria And Exclude Duplicates
Mar 20, 2014I have a large spreadsheet where I've successfully ranked a large series of data based on revenue, using product classification as a criteria & summarising this on another page with the top 20 products. The problem I'm having is that within certain criteria's I have some products with the exact same revenue figure, so if the 2nd ranked product within classification "C" for example has revenue of $100, & there's another product within the same classification also with $100 of revenue, on my top 20 report I have results for the 1st & 2nd ranked product, but a blank for the third product & then results again for the fourth
The formula I'm using is
=IF(Y12="NA",0,SUMPRODUCT(--(Y12=$Y$12:$Y$6000),--(AC12
Count Duplicates In A Cell Then Rank Them And Sort Them
Sep 13, 2006I would like to have the duplicate numbers in position one ( cell D9:D18), position two (cell E9:E18) and position three (cell F9:18) all counted and then ranked based upon date range in column A.
The number order of precendence is 0-9 with zero being the lowest.
Column (I9:I18) counts the duplicates, draws and no draws of digits 0-9. Column (J9:J18) converts results from column I9:18 into a percent.
I need to add a sort button at the bottom of position 1 (columns H & I 22), position 2 (columns L & M 22) and position 3 (columns P & Q 22)
When the sort button is selected it will sort the data by # of repeats, draws, and no draws as illustrated in (columns I, M & Q) or sort data by Position number from 0-9 as illustrated in (columns H) which will then show data of repeats and percentages out of rank order, because it is in order of number precedence.
Last but not least a graphic bar chart that shows the results ranked highest to lowest from when the sort button is selected with the number at the top of the bar colored black. Bar graph colors to be: top 3 red, middle 4 yellow and bottom 3 blue. This should show a vertical cascade effect.
Ranking Values And Ranking Duplicates The Same Rank
Mar 30, 2014Ranking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
Example:
20
18
18
15
12
11
11
9
The ranking I am looking for is:
1
2
2
3
4
5
5
6
VBA Using Rank Formula?
Mar 9, 2012here is some code that I have,
Dim zima As Range
Dim Col As Long
On Error Resume Next
Set zima = Application.InputBox("Select column to paste to", Type:=8)
On Error GoTo 0
If zima Is Nothing Then Exit Sub
[code]....
Where in the formula C[-7], I need this to line up with the column that I selected via the InputBox. If I select column L then the -7 needs to change to +2. OR would there be a better way to write the formula in VBA?
Rank A Value Next To A Formula
Jul 29, 2008I recently made a formula of net sales contribution (sales per product category/total sales). For weeks 1.2008 to 30.2008. But I have several product categories. I would like near the value of the formula (not in another cell!) to insert a rank of these contributions. I d love to have the rank inside a parenthesis() near the percentage.
Here is the format
NET SALES CONTRIBUTION PER PRODUCT HIERARCHY 239.200740.200741.2007
COM RETAIL MEDIA0,03%0,73%0,22%
DTM STORAGE MEDIA0,00%0,06%0,00%
Of course I dont know how to do it.
Rank And Min Formula
Mar 31, 2009i rank some thing
stock 25
A B c D
rank style qty
1 st1 10 for d i need go to rank 1 first then qty 10
2 st2 5 then 2 then 3 till 25 (stock ) after it comes 0
5 st3 4
4 st4 3
3 st5 6
it can posible with rank and min formula
Rank Formula
Jun 19, 2006I want to find the rank of a year that falls between the start date and end date. For e.g.
Start date : 1/1/2005
End date : 10/31/2014
Target Date: 12/20/2009
Using year(start date)-year(end date), I get the number of years but how to evaluate the answer in a cell to get the result = 5 (my desired answer as 2005 through 2009 = 5 years).
Rank Formula Without Counting Zero's
Jan 8, 2008I would like to rank the values without the Zero's. Something like the example below. Where the digits are being ranked and the negatives without ranking the 0's....
View 9 Replies View RelatedFormula To Rank Smallest To Highest?
Apr 3, 2013a formula to rank a set of data ? The smallest data will be rank 1 and the highest will have the last rank. this range of data has some spaces in between, that needs to be ignored but should not be deleted. I have attached a spreadsheet stating the case.
View 4 Replies View RelatedRank Formula Not Working Properly
Oct 7, 2009I have a rank formula that is seemingly erroring out on certain cells - indiscriminately. I have tried and tried to figure this out for myself but this is beyond my knowledge.
Only on some cells is the rank not working and returning a "-" (the error result).
I want the rank to use absolute numbers, so that it will rank according to variance or percentage (regardless of +/-). I am also using another cell (R1) to tell the rank what column to use.
As you can see there are a few entries, both + & -, that are not being included in the rank - for reasons beyond me.
Ranking :: What Formula Would Be Used To Rank Scores
Jul 31, 2007what formula would be used to rank scores if you had the following
name score
participant 1 14
participant 2 27
Participant 3 19
to get this result
Participant 2 27
Participant 3 19
Participant 1 14
Excel 2010 :: Rank Count Formula
Aug 14, 2014I have attached an excel 2010 spreadsheet to show the issue.
I was shown a formula to rank a series of numbers =RANK(A2,$A$2:$A$19775,0).
However, the ranking figure that get's generated, appears to be counting the cells or something like that.
Ranking Example.xlsx
Formula That Will Rank Based On Highest Data
Mar 12, 2014I am building a football stat database which I am looking to put in an individual sheet which will search the other 20 sheets, collate the information and then display a top 5 ranking in each area. For example, this is our setup for the data:
Screenshot 2014-03-12 21.56.18.jpg
So what I want to to is have a separate sheet which will have a section for say over 1.5 goals %. The formula would go and retrieve all of the % results for each individual team. Then it would rank the 5 best teams and display the team name in the first cell and the % in the other cell.
Identifying Varying Data And Rank Formula
Sep 17, 2009i am trying to work out how to use the rank formula to rank numbers in column B and keep them in unison with Column A.
So Column A has say 5 1's with column B having different scores then continuing under 1 in A is 2 and so on is there a way to continue the ranking formula without manually changing the cell ranges?
so =rank(B1,$B$1:$B$7,1) but can i do that if A =1 and then A=2 etc ?
so if A=1,rank(B1,$B$1:$B$7,1)
Rank Calculation (with Correction) In Array Formula
Nov 9, 2007I'm trying to calculate the sum of rank vlaues in an array formula (required for a Mann-Whitney U-test calc). For example, I have the results of a survey quesiton (1-5 rating) with particpant groups of Sales, Marketing & Other. I want to sum the Ranks of the data points that come from Sales or Marketing (but not Other). The added complexity is in the need to add in the Rank correction value to account for ties.
The conditional arrays are the tricky part. I'm very close, but the array formula is still including the Other values. If I delete those data points the formula works great. For those with strong stomachs, I've copied my latest formula below.
$C$% = "Sales" and $F$5 = "Marketing"...
={SUM(IF('Survey Data'!$D$3:$D$30=$C$5,RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30))+(($M115+$N115)+1-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),0)-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),1))/2))}
Ranking Error :: Formula To Rank Employees
Feb 12, 2009I had tried ranking formula to rank employees on some cirteria it was working, but if there is any tie between two employees then the next rank is not displaying for example in Ach Rank : rank 5 is missing because there is tie is between two employees is rank 4. Request your suggestion and help on this for overcoming the issue.
Formula used for ranking : =IF(B2>=75%,RANK(B2,$B$2:$B$41,1)-COUNTIF($B$2:$B$41,"
Rank Formula Excluding Blank Cells
Jun 4, 2009I am currently working on a football spreadsheet ranking players based on their fitness performance scores. For example, there are 14 persons on Offensive Line. I need all their test scores ranked out of 14. However, if there is a blank, I still need the test scores to be ranked out of 14.
As of right now, I have cheated, and inputted a random number to bypass the blank:
=IF($G12>10, 0,RANK($G12, $G$12:$G$25,0))
But, this now affects my average of the fitness testing scores for that position. This could be avoided if I could find a way around my first problem.
Rank Formula Error With Same Values (Ties)
Feb 22, 2008I'm having problem with ranking results (ascending) with similar values e.g. values 1, 2, 2 and 4 fails by use of Rank-formula (rank: 1, 2, #N/A and 4) as value 2 appears twice.
I've attached a simple example of the problem.
Rank Formula Using Arrays And Dynamic Named Ranges
Oct 13, 2011I need to rank the top 3 names for each location based on gender (see sample data table below).
My spreadhseet has been setup using dynamic named ranges ("Size", "Name", "Gender", "Location" and "Score") using the formula "Size"=MATCH("zzzzz",'Sheet1'!$A:$A) and then "Name" =OFFSET('Sheet1'!$A$2,0,0,Size), and so on for "Gender", "Location" and "Score".
Is there a way to design an array rank formula using the dynamic named ranges to return the name associated with the highest score for "M"s in location "N"? I want to be able to edit the formula so I can chose which rank to display (e.g. 3rd, 7th, etc).
I've been playing with the following but can't get it to work
{=RANK(IF(ISNUMBER(MATCH(Gener,{"M"},0)),IF(Location{"N"},0),Score)}
NameGenderLocationScoreTimMN89
RebeccaFN45DanaFN85TerryMN15
RachelFN78BruceMN31BryanMS15
DonnaFS80JakeMS67MelissaFS66AdamMS48KateFS90
Creating Formula To Rank Certain Cells In Reverse Order
Aug 23, 2012creating a formula to rank certain cells in reverse order.
Example
Cell Total Rank
B1 = 2456 3
B15 = 2369 2
B30 = 2547 5
B45 = 2141 1
B60 = 2471 4
Rank every 15 cells basically in reverse order.
Formula To Rank Text Objects Based On Numbers, Interesting Read
Dec 30, 2008I'm attempting to create a formula that will find the name associated with a value, and return that name on the same column as that value in a later equation.
OK OK to illustrate it a little better:
There are three people: Bill, Ted, and Andy. Each one is ranked in Points, so my table looks like this:
A B
1 Bill 10
2 Ted 20
3 Andy 30
Later on, I want to rank the individuals based on their score, using a formula. Right now, I can rank the scores based using LARGE(B1:B3,1), then LARGE(B1:B3,2), and lastly LARGE(B1:B3,3). That ranks the numbers in descending columns. However, I want the information to automatically populate the name associated with that particular point total. So, I want the system to know that B1 is Bill's score, and rank it, in descending order, later on in the spreadsheet, with Bill's name.
Rank A List Then Re-rank The List While Excluding Certain (or By Criteria) Items
Dec 30, 2013I'm trying to Rank a list and than re-rank the list while excluding certain (or by Criteria) items
Vendor Co
Cost Fee
Rank
Vertox
500
4
BV
1520
3
[code].....
Remove Duplicates Out Of Formula
Apr 2, 2014I have the following formula
=IFERROR(INDEX('Data - CURRENT'!$B$2:$B$2500,MATCH(LARGE('Data - CURRENT'!$BA$2:$BA$2500,ROW(A1)),
'Data - CURRENT'!$BA$2:$BA$2500,0)),"")
This worked wonderfully until a duplicate crept in to Column B. Now there is the potential for many more duplicates. Column B holds an 8 digit numerical number. I am just struggling to add in a parameter that ignores any duplicates that have been added
Find Duplicates Formula..
Mar 13, 2009I have two columns of email addresses and I want to make sure that between these two columns there are no duplicates.
View 4 Replies View RelatedFormula For Find The Duplicates
Dec 20, 2007I have excel sheets that will show a customer account number an ammount they need to pay and there full name and a date when the payment is expected, is there a formula that will find duplicates, if the same entry has been put in twice
Formula To Remove Duplicates From A List?
Apr 3, 2014I have a list of what we call "model codes" which are is a similar format to "DFS41FC57DD728NCWRY3"
The list could be 6000 rows but may contain hundreds of duplicates and may only contain 50 different model codes
I am looking for a formula that will populate a new column (B in the example below) with only the individual codes (unfortunately the xls example I created wont upload)
COLUMN A COLUMN B
DFS41FC57DD728N3SRY3 DFS41FC57DD728N3SRY3
DFS41FC57DD728N3SRY3 DFS41FC57DD728NCWRY3
DFS41FC57DD728N3SRY3
DFS41FC57DD728N3SRY3
DFS41FC57DD728NCWRY3
Duplicates Pulling Through From Index Formula?
Apr 10, 2014The attached sheet is an example of a tracker sheet that I am trying to put together. No matter how I look at this I cant get my head around how to make this work
Basically It would work fine if all of the amounts were different. But in the cases where the retailers have been offered the same level of support YTD it is causing duplicates to pull through into the formulated tab.
I attached will clear up my query.
I have highlighted in red where the duplicates are showing
PS - It does need to be formula driven
TEST Manual Bonus Tracker 2014.xlsx
Large Formula With Dates With Duplicates
May 26, 2014In cell G1 I have my snapshot dates header and dates running from G2 to G31. Next to in Column H I have the sold items by Product A.
There are 6 different snapshot dates and I need them to be horizontal with a formula and none duplicated with the largest (newest) date first so I can SUMIF the sold item per date. If I simply pull a LARGE formula it will return 24-05-2014 in all rows is it is the biggest "value".
When I them add new snapshots (biweekly) then the horizontal snapshot line will automatically add the newest dates (i.e. find the largest or newest, the 2nd newest snapshot, the 3rd newest, etc. Hence, in K2 we would have 09-03-2014 with 672 sold items in K3 (via SUMIF), in L3 we would have 18-03-2014 and 7523, in M3 23-03-2014 and 1703, etc.
I'm not sure if I explained it well enough. I'm attaching a file if this makes more sense.
G1 G2
Snapshot DateProduct A - Sold Items
09-03-201423
09-03-2014354
09-03-201435
09-03-2014254
09-03-20146
[Code] .......
Latest Snapshot
09-03-201418-03-201423-03-201410-04-201424-04-201424-05-2014
6727523170310787201035
Formula Or VBA Code To Remove Duplicates?
Apr 10, 2014I have a set of text in rows which includes duplicates like this:
Column A
Text 1
Text2
Text1
Text500
Text500
I then need to remove the duplicates and put them in column B. I normally use the remove duplicates button in Excel to do this but seeing as I have to do this task every day, I was hoping there would be either a formula or VBA solution which automatically does this?