I am trying to add the following code to fill in a certain range only if the range is blank. I can get it to fill in with the formula but it will still enter over if the cell already contains information.
Code:
Sub YTD()
Dim isempty As Boolean
isempty = True
For Each cell In Sheets("YTD%").Range("December").Cells
If cell.Value! = "" Then isempty = False
[Code] .......
I would like to get some code that will fill blanks in a range.
I have not used the board facilities properly. In the following table I need each blank cell in column B to be filled with the text from the preceding cell that has text in it.
i.e. B2 to be populated with "text1". Cells B4:B6 to be populated with "text2".
The code needs to know that row 9 is the last row to populate.
A
B
1
head
text1
[Code] ........
I have a set of integers in the ranges of: B11 to B40, C11 to C40, D11 to D40.
Occasionally the values in the cells are deleted and thus left as a "blank" cell.
I wish to create a macro that will find these blank cells in these ranges and replace them with a simple 0.
How do I make this to work with dynamic range instead running for complete column? For example: Run this code until last active cell in Column A. Column A will always has value so if cell A25 is last active cell in range then this code should stop executing for column R25. So execution of this code would depend on active cell in column A.
Columns("R:R").Select
Dim Cell As Range
For Each Cell In Selection.Cells
If Cell.Value = True Then ' if true do nothing
Cell.Value = ""
ElseIf Cell.Value = False Then ' if false change to Null
Cell.Value = "Null"
End If
Next
I have an excel file that contains a list of all clients and want to add an "Active Client" tab within the workbook. The list indicates some active, some inactive. The "Active client" column shows an x at 1st row or if "Inactive" is left blank. I want to auto populate all "Active Clients" to a different Worksheet without having blank rows or FALSE as the result of the current formula ...
=IF('Lead Data'!B17="√",'Lead Data'!H17)
I have a formula
=LEFT(L2,FIND(".",L2,1)-1)
I need a macro to copy this to the last blank cell in the column, the last blank cell will be different each month otherwaise i would have just been able to enter a range L2:L6000.
I need to clear a value in a cell(what ever may be the value) based on a condition in another cell and set it to blank. Ex: If cell A is blank and then i need make cell B also blank, if cell A has some value then i should not disturb B I need to do this using formula. I have tried the below, but no use, IF(AA1="",REPLACE(Y1,1,10,""))
View 2 Replies View RelatedI have a range of values that are not a constant length. I want a macro that will calculate the range and fill with a formula using the new range. In this example, I need a formula to look at the values in range f464:f471 and calculate the number of values greater than $1000. Column B is a salesman identifier. I can do this manually, but it takes me about 1/2 hour to complete. At every change in "B", I need to place this formula in the open, blank cell in "E" such as highlighted below.
week39
ABCDEF45939SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046039SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046139SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046239SCHTERR-WIEDEMANNDCCDIST-MUSCHANY0463 SCH Total 14042.2146439SCITERR-SULLIVANDCCDIST-MUSCHANY15587.1546539SCITERR-SULLIVANDCCDIST-MUSCHANY7217.2246639SCITERR-SULLIVANDCCDIST-MUSCHANY5316.6246739SCITERR-SULLIVANDCCDIST-MUSCHANY2720.6946839SCITERR-SULLIVANDCCDIST-MUSCHANY520.446939SCITERR-SULLIVANDCCDIST-MUSCHANY195.7147039SCITERR-SULLIVANDCCDIST-MUSCHANY047139SCITERR-SULLIVANDCCDIST-MUSCHANY0472 SCI Total 31557.7947339SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY4190.7147439SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3219.7647539SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3187.147639SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2209.3747739SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2132.7547839SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2034.56
Spreadsheet FormulasCellFormulaF463=SUBTOTAL(9,F435:F462)F472=SUBTOTAL(9,F464:F471)
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I have a formula that is averaging seven (one week) consecutive cells, I want to Copy/Fill the formula down the worksheet for the entire year. Is there a way to use the fill handle to drag down and make the formulas use the next seven colums?
I have removed the $ from the row numbers in the original formula, but when I use the fill handle it fills like this:
=average(B2:B8)
=average(B3:B9)
I would like it to fill like this:
=average(B2:B8)
=average(B9:B15)
I am in need of a solution (probably VBA) that can fill a range of cells with a formula IF they are blank. Ideally that range is a named range I can define in Excel. If that is too hard, then a hard coded column I hand-edit the script for is tolerable. Also, ideally, this script auto-executes whenever data changes on the sheet.
You formula I will populate is:
=IF(ISNA((VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1),"",(VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1)
..but a simpler formula can be stubbed in.
NOte that it does have relative references, so the script needs to adhere to normal EXCEL conventions of enumerating cell references.
If the script points to a refernce cell that contains the formula that is uber.
Maybe it should do copy and paste instead of a string replacement in order to leverage EXCEL's referencing?
I'm stuck on this, and this would be VERY useful for many of my sheets to be able to point to a refernce cell containing a formula to fill in.
Here is my array code
Dim Values() As String
Dim count As String
count = 9
For count = 9 To 1800
Values(count) = "=IF(AND(E" + count + "<>"""",AH" + count + "<>0),(AH" + count + "/E" + count + ")*100,0)"
count = count + 1
Next
I'd make it a static array but eventually I'm going to have to set it up where I wont know the upper bound.
Here is the other part of my code that I don't know what I'm doing.
If Range("A9") > 0.01 Then
Range("AI9:AI1800") = 0.01
Else
Range("AI9:AI1800") = Values
End If
I keep getting mismatch errors on the count variable, but I need it to be a string so I'm not sure what do here.
I have a spreadsheet where I want to filter out a row if the entire row has zeros across all the columns. I cannot just use a Sum() formula because some of the numbers are negative and there is a chance it could zero the sum out.
Currently to do this I am using the following to tell if there are values in each of my rows:
Code:
ABS(K3)+ABS(T3)+ABS(U3)+ABS(V3)+ABS(W3)+ABS(Z3)+ABS(AC3)+ABS(AF3)
Is there any way to write a formula where I don't have to keep adding to the formula when I add another column?
I have a list of 400 cells all in column A. Is there a way to have XL divide them up so that 100 are in column A, 100 in column B, etc., while still treating them like a single column (e.g. Sort will sort them all together)?
View 8 Replies View RelatedI've normally just dynamically selected a range using the xldown feature but because this row contains formula it goes always down to the bottom of the formula instead of the last cell which isn't blank.
How would i go about generating this dynamic range that stops at the first cell that contains no value (but has a formula)? Perhaps a do while loop which looped down until it hit the first blank and then assigned the cells it had looped through as the range?
I am try to get the following VBA macro to work; however, I keep getting hung up on errors regarding the formula I am trying to input. It is getting hung up on the apostrophes and dollar signs. I am fairly new to VBA so I am lost when it come to converting my sheet formulas to VBA.
Code:
With ActiveSheet.UsedRange.SpecialCells(xlCellTypeBlanks)
.Formula = "=RAND()*0+VLOOKUP(INDIRECT(ADDRESS(1,COLUMN(),3),TRUE),INDIRECT("'"&TEXT(INDIRECT("$A"&ROW(),TRUE),"DD-MMM-YYYY")&" Inv'!"&"$J:$K",TRUE),2,FALSE)"
.Value = .Value
End With
I need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
I have a workbook with 15000+ Isometric drawing nos. in column A and and joint nos. in Column B. I want to fill the blank cells with the isometric drawing no.s for the corresponding joint nos. A sample worksheet is attached.
View 8 Replies View RelatedI have lot of data in column B. I need to copy the first cell and paste content to next ones before empty cell.
Replacing xxx with the data in first cell all the way to the end of column B.
Before:
After :
123-1
123-1
xxx
123-1
[Code] ........
I have a worksheet where the user input data and i have to make a macro that exports certain cell from the worksheet to a text file without any separating symbol, just like “CONCATENATE and EXPORT”. This is not hard to do, i’ve done it already. But the difficult part is here. My customer wants this macro to be interactive with the user and with an AS400 server that takes the textfile and reads it to find the value of certain variables, something like the opposite process of CONCATENATE. The hard part for me is that if any of the cells concatenated is blank i have to fill the text file with blank spaces.
If the concatenated cells are:
|one| two| three| tour| five|
the exported text to the text file will be:
onetwothreefourfive
But if one of the cells is blank:..................
I have two columns with data (length of column B represents total length of database.) Column A only has some blank cells.
I need to fill Column A blanks with the contents of cell above.
Monday
Tuesday
[blank cell]
Wednesday
Thursday
[blank cell]
[blank cell]
***end of column B
Therefore VBA to place Tuesday into blank and Thursday into the two blanks before bottom of the range of Column B.
Using record macro doesnt give me go to first blank etc.
something like
Start column A2 to End
Find first blank, copy active cell -1
Next blank cell. (ins some cases it will copy the name it has just filled into cell above.
Finish at last cell in Comumn B
Is there any way to fill blank cells going up instead of down, other than having to go to each section and dragging the fill handle. I'm looking at a list of data that has a summ code at the bottom of each section of data. I need to fill the blank cells above the summ code for each section.
For example:
D2-NHL RACE .001515
D2-SERVICE CODETO1515
NHSUMM CODETO1515
A0-ATBV TRIO DV .018989
A0-SERVICE CODETO8989
C0-ATBV C HN .017676
C0-ATBV C HNAC .0011
C0-SERVICE CODETO7777
43-ATBETRIOHN .014646
43-ATBETRIOHNAH .0011
43-SERVICE CODETO4747
45-ATBECMBDVRHN .0133
45-ATBECMBDVRHN0 .0033
45-SERVICE CODETO66
NVSUMM CODETO6346963468
Everything above NV needs to be filled with NV and everything aboveNH needs to be filled with NH. There are over 13000 lines of data. How do I accomplish assigning or filling the related summ codes in the blank cells in between?
I am using this formula:
=IF(INDIRECT($E$1&"!$B4")=0,"",IFERROR(INDIRECT($E$1&"!$B4"),""))
Now, if that cell happens to be blank, I want it to be grey. But if data is drawn into the cell, I don't want it to be grey.
Fill with (blank) when no data found
I have the following data lets say:
I have a worksheet with a column with words, but a lot od the cells are empty. I want these replaced with the word above. I know I can do this with fill handle, but as there are thousands, it would help with a routine - a program - that I could run on the column and thus fill out all the empty cells.
View 12 Replies View RelatedI need to automate a conditional fill down in excel. I have a sheet, some of the columns have rows of empty cells (the amount of empty cells varies). Whenever there is an empty cell I need to fill down, however when a new value is encountered that must then be filled down and so on. This bit I have as:
Set rngWBSv1 = Range("c2", Range("c65536").End(xlUp))
For Each clWBSv1 In rngWBSv1
If clWBSv1.Value = "" Then clWBSv1.Value = clWBSv1.Offset(-1, 0).Value
Next clWBSv1
Set rngWBS2 = Range("d2", Range("d65536").End(xlUp))
For Each clWBS2 In rngWBS2
If clWBS2.Value = "" Then clWBS2.Value = clWBS2.Offset(-1, 0).Value
Next clWBS2 ......................
I wonder if soeone could change the following macro so that the bottomcell
is set to be as far down as there is content in Column "A". As it stands if I fill in blank cells in Column "C" and the last cell with data is say C10 it does just this. But if the actual last row with data in column "A" is A14 then cells C11, C12, C13, and C14 are ignored. C11, C12, C13, and C14 should be the same as C10 above them.
Sub FillBlankCells()
Dim topcell As Range, bottomcell As Range
Set topcell = Cells(1, ActiveCell.Column)
Set bottomcell = Cells(16384, ActiveCell.Column)
If IsEmpty(topcell) Then Set topcell = topcell.End(xlDown)
If IsEmpty(bottomcell) Then Set bottomcell = bottomcell.End(xlUp).Offset
Range(topcell, bottomcell).Select
Selection.SpecialCells(xlBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
End Sub
Other macros recognize the actual last row.... but have issues with columns formatted as Text. The macro above doesn't create problems with columns formatted as "Text".
I am trying to fill down data in columns A:C but only if there is data in column D. I have butchered VBA into this working bit but the fill down stops too early.
Sub fillall()
Set x = Worksheets("Paste"). Range("A3", "c3")
Do
Range(x, x.End(xlDown).Offset(-1, 0)).filldown
Set x = Range(x.End(xlDown), x.End(xlDown).Offset(0, 2))
Loop Until x.End(xlDown).Offset(0, 3) = 0
End Sub
I want to copy an active cell in row 2 (I dont want to fix a cell as it can be any cell at any time). I want to copy it all the way down to a cell where the next row after it, is completely blank on all the 256 cells.
View 6 Replies View RelatedIf A1 has a value of ABC,
A2-A5 are blank
A6 has a value of DEF
A7-A10 are blank.
Is there a formula that will fill A2-A5 with ABC,
look at the value of A6 and see that it is different from A1-A5,
or not blank,
change the fill value to the new value, A6,
then fill down the value of A6 into A7-A10
instead of manually using the fill handle?
