Formulae To Find Last Used Row In WorkSheet: Aladin's UDF

Sep 11, 2007

I found this post in the archive section. Its purpose is to find the Last Used Row in a Range, "A:A".

Using it, I get a #Name? error. I have placed the UDF in a module, placed the formulae in K1.

I have mixed data from A1:A34.

Function Used(r As Range) As Range

Dim q As Range
Set q = r.Parent.UsedRange.Cells(r.Parent.UsedRange.Cells.Count)
Set Used = Intersect(r, r.Parent.Range(r.Parent.Cells(1, 1), q))
End Function

=INDEX(A:A,SUMPRODUCT(MAX((LEN(USED(A:A))>0)*ROW(USED(A:A)))))

View 9 Replies


ADVERTISEMENT

How To Validate A Formulae

Jan 30, 2009

I have a database on one sheet and a 2 count if formulae recording information on the next to be exact one formulae counts the number of monthly values and the other count yearly values. I want the sum of these formulaes to be equal or less than 25. and to show an error if the sum of these is mor than 25.

View 9 Replies View Related

Adding Values Not Formulae

Apr 30, 2009

I am slowly working my way thru Excel succesfully but have come up with another one I can't find an answer for..... YET

I simply want to subract the value of two cells, however the values of those cells are produced by formulae. Hence I get the #Value! error.

Once again I know there's gotta be a simple solution, I just can't locate it

View 9 Replies View Related

Convert All Formulae To Values

May 7, 2008

I need to add a piece of code to a spreadsheet that will turn all formulae within into values. The number of tabs in the spreadsheet is likely to change over time but I want the code to apply to all the tabs - without needing to change it if a tab is added/ deleted.

View 3 Replies View Related

Evaluate A 'dotted' Number Using Formulae (not UDF)

Apr 12, 2006

Is there any way to 'evaluate' a dotted number (similar to an IPv4
address but not just those) using standard worksheet formulae (ie no
UDFs, VBA, or ATP functions)?

To make it a little more complicated, I need to be able to evaluate
not just IP addresses (although that would be a use) but also a
'number' such as 9.0.2 compared to 8.7.5 so that they can be sorted
and / or compared.

The views expressed are my own, and not those of my employer or anyone
else associated with me.

My current valid email address is:

1bupdvc02@sneakemail.com

This is valid as is. It is not munged, or altered at all.

It will be valid for AT LEAST one month from the date of this post.

If you are trying to contact me after that time,
it MAY still be valid, but may also have been
deactivated due to spam. If so, and you want
to contact me by email, try searching for a
more recent post by me to find my current
email address.

The following is a (probably!) totally unique
and meaningless string of characters that you
can use to find posts by me in a search engine:

ewygchvboocno43vb674b6nq46tvb

View 10 Replies View Related

Formulae That Applies To All Sheets On Opening

Jan 14, 2008

is it possible to have a sheet that i can type in formulae and the formulae will automatically copy itself into the same cells on any new sheets i open?

View 13 Replies View Related

Macro With Array Formulae Has Knocked Me Down

Jul 31, 2008

Have this workbook with over 34 worksheets. Exactly 31 sheets have over 700 rows & 5 columns of array formula. The cell references for these formulae are on "Sheet2" and the values in Sheet2 get populated after the macro is executed for Sheet1.

The macro when run, takes helluva time to complete and populate the values in these 31 worksheets. If I turn off the calculation, it throws out a an exception and on the top of it I have noticed sometimes that the computer hangs itself and becomes DEAD. The only option I got is to press the Reboot Button.

The same macro when run on less than 100 rows, works like a treat ! Could someone help me resolve this high density problem, the Excel way (I am not in a position or a situation right now - to use ADO Recordsets to rectify this problem and neither do I know how to use it). So if your suggestion asks me to use the ADODB then unfortunately it will not be helpful to me at the moment

I have tried by all means and now I am stressed out.

Sub try()
Worksheets("sheet1").Activate

Range("A5").Select
ActiveCell.FormulaR1C1 = "=R[-1]C"
Range("A5").Select
Selection.Copy
Range("A6:A65536").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.PasteSpecial Paste:=xlPasteFormulas, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False

View 9 Replies View Related

Extract Portion Of String Using Formulae

Apr 11, 2009

If I have a string of the form:

S:GenerealfoldereferenceFolder2FolderTest_ABC_2009_v2.xls

I would like to extract the ABC term, i.e. the term that liues in between the 2nd and 3rd "_" in the Workbook name (in the above example "Test_ABC_2009_v2.xls")

View 9 Replies View Related

Multiple 'IF' Formulae Applying To A Cell

May 2, 2006

is it possible to have more than one IF function applying to a cell eg. if value in cell A1 is greater than 10 then Positive is written but if value in cell A1 is between 8 and 10 then Suspect is written.

View 2 Replies View Related

Stopping Auto Updating Of Formulae

Sep 20, 2006

Everytime that I insert a row into a worksheet which a number of formulae refer to, those formulae get updated automatically in such a way that it is not in my favour.
The formulae refer to rows 2:2000 on a number of different columns. Adding a new row shifts the references to 3:2001. I presume that I can stop this from happening

Example:

= SUMPRODUCT(('List of DD Donors'!E2:E2000)*('List of DD Donors'!F2:F2000='DD Tally'!E6)*IF(DATEDIF(('List of DD Donors'!G2:G2000)-1,DATE(2006,3,31),"m")>12,12,DATEDIF(('List of DD Donors'!G2:G2000)-1,DATE(2006,3,31),"m")))

changes to...

=SUMPRODUCT(('List of DD Donors'!E3:E2001)*('List of DD Donors'!F3:F2001='DD Tally'!E6)*IF(DATEDIF(('List of DD Donors'!G3:G2001)-1,DATE(2006,3,31),"m")>12,12,DATEDIF(('List of DD Donors'!G3:G2001)-1,DATE(2006,3,31),"m")))

View 4 Replies View Related

Referring To Formulae In The Choose Function

Jun 27, 2007

I have a number of different formulae I want to invoke according to a choice. I am able to request the formula I want by entering them ‘in line’ as value1, value2 etc into the CHOOSE formula … e.g. =CHOOSE($H$1,IF(N3>O3,1,""),IF(N3<O3,1,""),IF(N3=O 3,1,””))

but this is cumbersome and confusing since I have a growing number of choices and some of the formulae are quite long. I want to enter them in a list and extract the formula which corresponds with the Index_num in the CHOOSE formula. I also need the cells in the formulae to be relative so this rules out using NAMES to refer to the formulae.

View 4 Replies View Related

Macro To Calculate Formulae Stored As Text

May 8, 2008

I would like a macro which works on the selected cells:

A number of the selected cells contain formulae with an apostrophe in the beginning.

I need the macro to remove the apostrophe and calculate the formula in those cells..

View 9 Replies View Related

Copying Formulae Not Transposing Cell Range

Jul 21, 2006

I have a macro which inserts rows at certain places in a data table. This works fine. I then want to copy the formulae from the the row aboove or below (dependent on certain criteria). This sort of works.

I have is that when the row is copied, the row numbers within the formulae do not change relative to the new row. Eg if I copied down "=A6" one row, the formula still says "=A6", rather than "=A7".

I have tried variations of

Selection.PasteSpecial Paste:=xlPasteFormulas

I also tried the AutoFill method (but this didn't work at all when I tried it with a whole row)

Previously, I would have selected ranges and then pasted on the active sheet. However, I am trying to re-educate myself in writing macros that do not 'select' ...

View 5 Replies View Related

For Loop For Changing Formulae Based On Other Sheet

Jul 27, 2006

I want to write a For loop so that it checks the range G2:R2 of Sheet1 for the first non-zero cell in that range. When it comes to the first non-zero cell, it will change the formula of A2 on Sheet2 to have the SUM of that non-zero cell and the next two cells to the right. Example:

SHEET1-
G2 = ""
H2 = ""
I2 = ""
J2 = "3"
K2 = "4"
L2 = "8"
M2 = "9"
N2 = "2"
O2 = "5"
P2 = "3"
Q2 = "11"
R2 = "7"

SHEET2-
A2 = SUM('Sheet1'!J2:L2) --->"15"

View 5 Replies View Related

Use Values In Adjacent Cells In Formulae Reference

Nov 24, 2007

I'm trying to write a function that returns, from a different sheet, the value in column C and row 6*current row.

For example, if the function is typed into cell B5 in Sheet 1,
the resulting value would be whatever is in cell C30 in Sheet 2

I tired the following but it gave me an error
=Sheet2!&"C"&(ROW()*6)

View 2 Replies View Related

Force Formulae Recalculation & Return Day Name From Workday Function

Feb 27, 2008

I'm trying to make a schedule of deposits made for the month of March 2008. (Deposits are made on a daily basis.) With this, I wanted to know when the deposit would clear with the bank using the WORKDAY formula given that I have to count 6 banking days after the date of deposit (Saturdays and Sundays excluded).

I'm using Mac and I recently upgraded to Office 2008 (never tried WORKDAY formula in other versions). I am aware of the syntax used for this formula and it works just fine in other cases. But I noticed that with start_dates falling on a Thursday or Friday of the week, Excel would give me a result date that falls on a Sunday, which is odd given that it's supposed to ignore non-working days or weekends. (I haven't even gotten to inputting holidays yet.)

View 6 Replies View Related

Find Keyword In Worksheet - Copy Entire Row To Another Worksheet?

Feb 26, 2010

I have an Excel WorkBook with 100 WorkSheets.

Each Worksheet has a unique identifying label - "Requirement Number"

Within each worksheet is free form text data of the following categories:

Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....

The text of the categories may begin in column A or B

What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.

Data extracted from the next Worksheet would begin a new row in "Extracted Data"

Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...

The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.

I found a thread similar to this problem:

find and copy row

However, it only finds, copies and pastes for one keyword.

View 9 Replies View Related

Find Keyword In Worksheet- Copy Entire Row To Another Worksheet

Feb 26, 2010

I am looking for a solution to an otherwise very tedious problem.

I have an Excel WorkBook with 100 WorkSheets.

Each Worksheet has a unique identifying label - "Requirement Number"

Within each worksheet is free form text data of the following categories: ...

View 9 Replies View Related

Find Field Values In One Worksheet But Not In Second Worksheet

Feb 14, 2009

Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.

The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.

How do I find out which courses have end < 2004. But do not also have an end date > 2004.

What I am trying to do is determine which courses are not longer being used since 2004.

View 10 Replies View Related

How Do I Prevent "#VALUE!" Results In One Cell From Preventing Other Formulae Dependi

Mar 2, 2009

I'm using an IF formula – BV2 =IF((OR(BQ2="yes",BU2="yes")),"Yes","No") - which just shows "#VALUE!" whenever BU2 shows "#VALUE!". Is there any way round this so that, if BQ2 showed yes and BU2 showed value, BV2 would say yes?

View 9 Replies View Related

Sort Formulae Returning Nothing ("" Empty Text) To Bottom

Mar 26, 2008

I have a sheet with a reference field that I want to sort. Each cell in the reference field has a formula in it, which specifies that the cell remain blank unless there is a value in the cell. The values are either text values or number values. e.g. =IF(ISERROR(S4),"",VLOOKUP(C4,'Rider Data'!A:G,6,FALSE))

When I sort the field in ascending order by the column that contains the formula above (using a macro written for this sort procedure), where the expected value is a text value, all the blank cells are sorted ABOVE the cells with text values in them, rather than below, even though they are blank cells. However,if I sort on a different column which contains time values or numerical values, the sort function works just fine. I have tested the VBA code that produces the erroneous sorting and confirmed that it happens only when sorting on columns that contain text values. I would like to sort text values in ascending order with blank cells BELOW the sorted cells.

View 3 Replies View Related

Find Value In Another Worksheet Using VBA?

Dec 13, 2013

With reference to the attached workbook, I need to write a VBA code which will look up the value in cell T4 from worksheet "tdploader" on the "cashbalance" sheet and return the date in row 1 based on which column the value is found e.g. H1 in the attached workbook example. The date should be returned back to cell P4 on the "tdploader" sheet. I have tried to use the Find VBA formula to no avail.

View 1 Replies View Related

Cannot Use Find On Another Worksheet?

Feb 14, 2014

I have a workbook with two sheets. I have one macro that saves the text of the active cell in sheet 1 for later use, the macro then switches to sheet 2 and using the find function I want it to search for the variable I just setup but I keep getting run-time error 91.

Here is what I have:

[Code] ......

I get the run-time error 91 with the Find lines of code yellow and the arrow pointing at the last row. I've tried all kinds of variations (with and without Activate) of the find function and as long as it is searching in sheet2 for the variable that was made in sheet1 it will NOT work. If I do this same search on Sheet1 I get no error. Also if I change the string name in Find to the same exact text just with quotes on it it will find that text without problem in Sheet2. But if I use a string I get an error.

Once I get this to work I want to save the address where the string is found in Sheet2 and use that address later as well so how to get an address from a Find result.

View 8 Replies View Related

Find The Score In Worksheet

Feb 5, 2009

Should be an easy fix for experts, but I'm not one of those...

I'm trying to create a "scoresheet" in Excel where a racer has a name and an ID number on the main tally worksheet, with columns relating to their scores for each race. Subsequent worksheets have results from each race (one race per sheet), with the individual referenced by their ID number.

How do I have the main tally sheet "find" that person's score for each event in separate columns so that it can add up their totals? I tried an IF formula to find each score in the subsequent sheets, but that didn't work.

Is there a simple formula to do this? I've been achieving the results by importing the worksheets into a Filemaker database (where the ID number "matches" and updates each score), but that's a pain, and I'd rather do it all in Excel.

View 11 Replies View Related

Find Value In Range On Second Worksheet

Jan 18, 2010

I have two worksheets to track students registering for one day workshops, which are offered monthly. In my first worksheet called 'CourseCapacity' I track the number of students that can register for each workshop. It looks something like this:

Col A - "Title"
Workshop101
Workshop102
Workshop103

Col B - "Capacity"
5
10
7

My second worksheet tracks the current number of students registered for each workshop for each month. What I want to do is read the course capacity from the first worksheet and display it for the monthly offering of each workshop.

Col A - "Title"
Workshop101 - 1/23/2010
Workshop101 - 2/20/2010......................

View 4 Replies View Related

Find And Replace On Every Worksheet

Nov 19, 2008

I need to do a find and replace on cell E13 on every worksheet in the workbook - a several hundred pages. The sheets are individually named not Sheet1, Sheet2......

First of all I need to find say "oldchippy" (without quotes) in cell E13 and if its there replace it with "oldchippy2", if its not there leave the contents as it is.

View 3 Replies View Related

Set Find Value From A Worksheet Cell

Jan 30, 2010

I’m having trouble trying to get a form, once activated;

- to use a specified cell value (offset from the target cell),
- to search another sheet for that value,
- then return values, (offset from the find value),
- to a series of textboxes.

Later, if the user if edits any of the textboxes, to perform the same procedure, pasting those values in the appropriate cells.

View 2 Replies View Related

Go To Next Worksheet To Find Corresponding Numbers

May 12, 2008

I have a file with 2 worksheets: Worksheet "Data" contains Store Locations, Store Numbers, Categories, Brands, Sales, Clusters, % Demand, etc.

Under % Demand on Worksheet "Data", I need a formula to look for % Demand from Worksheet "Stores" that related to the same categories, brands and stores numbers.

View 14 Replies View Related

How To Find First And Last Row Number For A Particular Value In Worksheet

Jan 14, 2014

Let's say I have a value (N) in Cell A1 of Sheet 2 in Workbook A.

What I want to do is to Find the row number of the first cell and last cell that contains the value (N) in Sheet 1 of WorkBook B.

View 6 Replies View Related

Look Up To Find A Specified Date On Another Worksheet

Jan 15, 2008

I need a formula that will look up to find a specified date on another worksheet, and input the data in the cell that is 4 columns to the left of it. Can this be done?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved