I'm trying to write a function that returns, from a different sheet, the value in column C and row 6*current row.
For example, if the function is typed into cell B5 in Sheet 1,
the resulting value would be whatever is in cell C30 in Sheet 2
I tired the following but it gave me an error
=Sheet2!&"C"&(ROW()*6)
I need the syntax that allows me to reference the cell directly beside my target cell for each row in a column
Like:
Col A Col B
S D
T F
S F
If i was targeting Col B
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
I have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
View 1 Replies View RelatedWhat I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I am slowly working my way thru Excel succesfully but have come up with another one I can't find an answer for..... YET
I simply want to subract the value of two cells, however the values of those cells are produced by formulae. Hence I get the #Value! error.
Once again I know there's gotta be a simple solution, I just can't locate it
I need to add a piece of code to a spreadsheet that will turn all formulae within into values. The number of tabs in the spreadsheet is likely to change over time but I want the code to apply to all the tabs - without needing to change it if a tab is added/ deleted.
View 3 Replies View RelatedI have a results table that i want to be able to rank into a simple list 1 - 4. However the results are not in cells beside each other.
I tried using a helper column and then the Large function, however cannot get it to work.
I have attached an example sheet, and in column L4 - L7 i would like to put the team names (taken from column B) into the right order from the results shown.
I have to replicate this over a number of different pools in a number of different divisions. This is just one pool.
Sometimes I need to copy the values in adjacent/continuous cells and paste them into the cells which I select and which are not adjacent/continuous.
Like for example i want to copy values from A1:A4 and paste in C1,C4,C7,&C10
jane....kaser...highschool......A
jack....Anderson....college.....B
Jill....Lovin.....college.......C
if both jack+anderson in a same row adjacent cells
as per in my table it should return column 4 value (A)
can I use VLOOKUP?
is there another way ?
I want to search a block of two adjacent cells in a table and return its forth column value.
I have a matrix in excel to show % and $ for multiple columns - set up like this:
Rows Part 1 Part 2 Part 3
Criteria 1 % $ % $ % $
Criteria 2
Criteria 3
the $ columns are conditionally formatted to highlight the top 10 values on the matrix. is there a way to have the corresponding % cells also highlighted? The % and $ aren't both top 10, so the % would have to be highlighted based on the $ top 10 cells.
I have a list of data:
2
140
1
660
10
140
0.92
660
2
130
0.18
660
4
510
0.44
820
4
510
I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)
I am new to programming in excel but am looking to make a VBA that allows me to see if a value entered exists in a second spread sheet. If it does then write a comment next to it. If not then write a different comment.
This is what my spread sheet currently looks like:
Sheet1 contains all the important information:
A
B
C
D
E
F
Load
PO
Delivery
Email
Item
ShipCon
1
3456
6543
Y
5219
5129
2
2345
5432
Y
1234
4321
Sheet2 contains the items that contain a shipping condition. There are two shipping conditions Fragile and non-Fragile. The list is of Fragile items.
Item
5219
1234
I am looking for a way to have it set up that when i enter an item number in sheet in 1 it searches in sheet 2 to see if it is fragile, if it is then returns, in sheet 1 column F next to that specific item 'Fragile'. If it doesn't find it in the list returns 'non-fragile'.
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies View RelatedAny method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies View RelatedI have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have two columns with multiple sets of data, based on the entered value I
need the corresponding header returned.
For example:
Column A Column B
Apples Green
Red
Granny Smith
Mutsu
Red Delicious
Oranges Naval
Manderin
Clementine
Tangerine
Now based on a response in another sheet I need to return either "Apple" or
"Orange".
=INDEX('Fruit'!A1:A65535,MATCH(K50,'Fruit'!B:B65535,0)) will work if I copy
Apple next to each apple type, but for other items the list of options can
grow dramatically.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedI want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:
A1 contains B
B1 contains 2
B2 contains "tribbles"
An imaginary function might go like this........
I am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.
View 2 Replies View RelatedI have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.
I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedI have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I have a database on one sheet and a 2 count if formulae recording information on the next to be exact one formulae counts the number of monthly values and the other count yearly values. I want the sum of these formulaes to be equal or less than 25. and to show an error if the sum of these is mor than 25.
View 9 Replies View Related