With reference to the attached workbook, I need to write a VBA code which will look up the value in cell T4 from worksheet "tdploader" on the "cashbalance" sheet and return the date in row 1 based on which column the value is found e.g. H1 in the attached workbook example. The date should be returned back to cell P4 on the "tdploader" sheet. I have tried to use the Find VBA formula to no avail.
View 1 Replies
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
I have a workbook with two sheets. I have one macro that saves the text of the active cell in sheet 1 for later use, the macro then switches to sheet 2 and using the find function I want it to search for the variable I just setup but I keep getting run-time error 91.
Here is what I have:
[Code] ......
I get the run-time error 91 with the Find lines of code yellow and the arrow pointing at the last row. I've tried all kinds of variations (with and without Activate) of the find function and as long as it is searching in sheet2 for the variable that was made in sheet1 it will NOT work. If I do this same search on Sheet1 I get no error. Also if I change the string name in Find to the same exact text just with quotes on it it will find that text without problem in Sheet2. But if I use a string I get an error.
Once I get this to work I want to save the address where the string is found in Sheet2 and use that address later as well so how to get an address from a Find result.
Should be an easy fix for experts, but I'm not one of those...
I'm trying to create a "scoresheet" in Excel where a racer has a name and an ID number on the main tally worksheet, with columns relating to their scores for each race. Subsequent worksheets have results from each race (one race per sheet), with the individual referenced by their ID number.
How do I have the main tally sheet "find" that person's score for each event in separate columns so that it can add up their totals? I tried an IF formula to find each score in the subsequent sheets, but that didn't work.
Is there a simple formula to do this? I've been achieving the results by importing the worksheets into a Filemaker database (where the ID number "matches" and updates each score), but that's a pain, and I'd rather do it all in Excel.
I have two worksheets to track students registering for one day workshops, which are offered monthly. In my first worksheet called 'CourseCapacity' I track the number of students that can register for each workshop. It looks something like this:
Col A - "Title"
Workshop101
Workshop102
Workshop103
Col B - "Capacity"
5
10
7
My second worksheet tracks the current number of students registered for each workshop for each month. What I want to do is read the course capacity from the first worksheet and display it for the monthly offering of each workshop.
Col A - "Title"
Workshop101 - 1/23/2010
Workshop101 - 2/20/2010......................
I need to do a find and replace on cell E13 on every worksheet in the workbook - a several hundred pages. The sheets are individually named not Sheet1, Sheet2......
First of all I need to find say "oldchippy" (without quotes) in cell E13 and if its there replace it with "oldchippy2", if its not there leave the contents as it is.
I’m having trouble trying to get a form, once activated;
- to use a specified cell value (offset from the target cell),
- to search another sheet for that value,
- then return values, (offset from the find value),
- to a series of textboxes.
Later, if the user if edits any of the textboxes, to perform the same procedure, pasting those values in the appropriate cells.
I have a file with 2 worksheets: Worksheet "Data" contains Store Locations, Store Numbers, Categories, Brands, Sales, Clusters, % Demand, etc.
Under % Demand on Worksheet "Data", I need a formula to look for % Demand from Worksheet "Stores" that related to the same categories, brands and stores numbers.
Let's say I have a value (N) in Cell A1 of Sheet 2 in Workbook A.
What I want to do is to Find the row number of the first cell and last cell that contains the value (N) in Sheet 1 of WorkBook B.
I need a formula that will look up to find a specified date on another worksheet, and input the data in the cell that is 4 columns to the left of it. Can this be done?
View 9 Replies View RelatedI want to find a text "Style#" in a worksheet and return the value next to "Style#". The value is supposed to be returned in, say, column H, for each row I found the text "Style#".
Below is the sample:....
I have a 4 tab worksheet containing Control, RawData, F, Dan. I need to know how to copy calculated values for one specific customer from the RawData tab to certian locations on the Dan tab matching the customer number on RawData tab.
RawData Tab colum (V) cells (2-99) will always contain one customer value at a time, and the calculated values will always be in cells E100, H100, and H101, but I need to copy the data in specific cells to the row/cells that matches the customer number on the Dan tab that contains all my assigned customers.
for instance if i'm pulling a report for customer 1-222-222 I need to know how to place the calculated values from the RawData tab to the row designated for customer 1-222-222 on the Dan tab in the required cells.
I believe this rightmost column number information is available. I just could not find it!
View 3 Replies View RelatedI've taken some time to learn about building an excel data entry form. I'm looking to add a find button.
1) users would type in something in the ID text box, then click on "find". The code will then try to find that record in the worksheet(just sheet1).
when it is found, i want the forms to auto-populate values from that row.
right now, the search works except when you are trying to search a value that that is NOT in the worksheet. I'm getting an error message that i've never seen before.
[Code] .....
form based input.xlsm‎
1. Find a text "State" in column 5 of a active sheet and copy that particular row to a new worksheet "Summary" including the header row.
2. Loop through other worksheets and add results to "Summary worksheet" without the header row.
I would like to put together a macro that would compare a list of part numbers against a database, and recommend alternative vendors for the part. The actual VBA I think I can handle, my problem is with the formula, array or whatever is needed to return the results I am looking for.
I have attached a sample workbook to this message that contains two worksheets. The "Sample Database" is an example of the format of the database (in Excel format) that I will be looking against. This data may be a hundred columns wide, and thousands of rows long.
The "Vendor Reference" worksheet shows an example of the data that would be returned if the "perfect" formula were entered into the cells. (I'll explain what I mean by "perfect" in a moment.) It also has an area designated for testing formulas to see what is returned. It's blank, because none of my tests returned anything but errors.
You will notice the column headings on the "Sample Database" worksheet. Columns A and B will always contain the part number and product description. The remaining columns will contain vendor specific data, with perhaps 25 different vendors, and 3 columns per vendor. These columns would be "PV", (for Primary Vendor), the vendor number, (010299, for example), and the Vend Part#.
If there is an asterisk, "*", under the "PV" column for that vendor, that means they are the "Primary" vendor. The cost from that vendor is listed under each vendor number. There may be instances where 2 different vendors are listed as primary. If that's the case, the formula can simply return the FIRST one found.
Here's what the "perfect" formula would return: .....
I need to find ALL occurrences of a date on a worksheet, but could not find a macro on our forum.
I found this macro on the web.
Attempting to find identical values in cells B3 & B4 located in another
worksheet titled "Density Chart" and to return the value in cell/column D.
The Density Chart values are located in column A & B and the value I want
returned, depending on the criteria entered would be found on the same row
but in column D.
Example...
Changeable Value in B3 = A123 (can also be completely alpha value and will
be different values each time the formula is used.
Changeable Value in B4 = 2.00 (always numeric value)
Density Chart information
ColumnA ColumnB ColumnC ColumnD
A123 2.00 55.555 65.555
A123 2.40 55.555 75.555
A123 2.70 55.555 70.555
B123 2.00 45.000 85.000
C123
D123
E123
etc
I have tried =if, I have tried =sum product ... at a loss
Excel 2003. Windows XP Professional. Bank reconciliations. How is it possible in an unprotected worksheet to hide additional data input in formulas so that visible invalid numbers produce accurate results? Displaying hidden formulas in formula bar reveals nothing. Blank cells have been included in formula, but searches for hidden numbers and links in these cells produced nothing. I'm at my wit's end to correct this misuse of Excel in my office.
View 14 Replies View RelatedI need some vba coding which will find and replace text on a worksheet. This would normally be straight-forward, however some text needs to be replaced by text which already occurs in the worksheet, and without it changing as well (if Find/Replace can perform two Find/Replaces at the same time???).
Here is the detail and what I am trying to accomplish: I have two worksheets each with a table of data.Worksheet 1 has a lookup table with three columns of data (column a and b are lists, with c being a formulated column which is dependent on the user selecting either column a name or column b name). I have done this easily enough using data validation on cell $C$1.Worksheet 2 has a user input table which column 3 is a dropdown validation using the named range "UsedName" from Worksheet 1.
I want the selected dropdown names to automatically change when the user changes Old Name to New Name (and vis-versa) on Worksheet 1.The list of values in the data validation dropdown list change well enough, but not any of the existing returned values. When I tried to use vba coding to Find & Replace, I run into issues because (Substanital and Important) are used in both instances, but at different levels with different matched names Important/Relevant.
Worksheet 1
A B C D
1 Cell with dropdown list New Names
2 (Old Names, New Names)
3
4 Old Names New Names Names Level
5 Equal Equivalent Equivalent 1
6 Dominant Critical Critical 2
7 Important Substantial Substantial 3
8 Substantial Major Major 4
9 Relevant Important Important 5
10 Minor Irrelevant Irrelevant 6
formula for column C =IF($C$1="Used Names", A5, B5)
column C is name ranged "Names
Worksheet 2
(Worksheet 2 has another table which has various data. One column which is a drop down list being pulled from Worksheet 1)
A B C D
1 Bob 25% Critical 19
2 Frank 60% Important 33
3 Ellen 40% Substantial 5
4 Ellen G 20% Substantial 12
5 Gary 55% Equivalent 100
6 Jo 50% Major 8
7 Peter 40% Important 22
8 Kim 12% Equivalent 30
9 Shelley 75% Substantial 15
10 John 75% Critical 90
so I want column C to automatically change from these New Names to the corresponding Old Name of the same level. So Critical would become Dominant, Important would become Relevant and Substantial would become Important.
I found this post in the archive section. Its purpose is to find the Last Used Row in a Range, "A:A".
Using it, I get a #Name? error. I have placed the UDF in a module, placed the formulae in K1.
I have mixed data from A1:A34.
Function Used(r As Range) As Range
Dim q As Range
Set q = r.Parent.UsedRange.Cells(r.Parent.UsedRange.Cells.Count)
Set Used = Intersect(r, r.Parent.Range(r.Parent.Cells(1, 1), q))
End Function
=INDEX(A:A,SUMPRODUCT(MAX((LEN(USED(A:A))>0)*ROW(USED(A:A)))))
Need VBA code to find first blank row on worksheet.
View 9 Replies View RelatedI copy information from one worksheet to another. Now i specify the range to copy in the macro. What i need is for the macro to find the end (last row) of data and than copy everything from row 5 to last row.
The below is a macro i currently use:
Sub Import_FNGC()
Const TARGET_FILENAME = "2008.xls"
'
' import_FNGC Macro
' Macro recorded 1/30/2008 by wwrobel
'
'
myMSG = "This will clear the data and import information. Do you want to continue?"
Response = MsgBox(myMSG, vbExclamation + vbYesNo, myTitle)
Select Case Response
Case Is = vbYes
Range("A5:BM100").Select............
I've heard that you can use SQL to query another worksheet in your workbook, but can not find anything on syntax or how to get started.
Use the FIND Method to locate dates?
View 3 Replies View RelatedI would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
WorkSheet 'Date Completed
ENTER Last 6 Digits of VIN:K43070Click
Here to Enter Date Completed
WorkSheet 'Date Completed
Colum A Column B...................
if there's a way to find the first non-empty cell in a worksheet?
Here's what I'm trying to do, the incorrect syntax is underlined:
If IsNotEmpty(123, 2) Then
'Execute some code
End If
I am using 2 criteria on one spreadsheet to identify an get a value on another spreadhsheet.
The criteria are Sex (Male or Female) cell C8 and Age (ranging from 0 -100) cell D8.
I want the formual to Look Up the Life Expectency (from the other worksheet) The worksheet has colums that contain age, sex and life expectency.
I can only get VLOOKUP to work with one criteria;
=VLOOKUP(D8,"Mortality Table"!$B$10:$E$109,5,False)
How can I find the Life Expectency utilizing 2 criterial, age and sex?
